[Xenomai-core] Ipipe breaks my MPC8541 board boot
Hi all,
First of all, I wish you a Happy new year !
I am currently facing an issue, which is ipipe related.
I have a board, based on a MPC8541 and with several ethernet interfaces.
When I compile my kernel (2.6.35) without ipipe support, everything
works fine, but when ipipe is here (2.12-01) I get an oops :
[ 25.329505] BUG: spinlock lockup on CPU#0, swapper/0, c03b06a8
[ 25.399320] Call Trace:
[ 25.428515] [c03cdc30] [c0008290] show_stack+0x3c/0x17c (unreliable)
[ 25.504602] [c03cdc70] [c01b9d64] do_raw_spin_lock+0x154/0x180
[ 25.574424] [c03cdca0] [c02bc5f0] _raw_spin_lock+0x3c/0x50
[ 25.640075] [c03cdcc0] [c00235b8] task_rq_lock+0x58/0x70
[ 25.703645] [c03cdce0] [c00246e4] try_to_wake_up+0x24/0x14c
[ 25.770350] [c03cdd10] [c0031098] wakeup_softirqd+0x3c/0x4c
[ 25.837051] [c03cdd20] [c0225f3c] dev_kfree_skb_irq+0x7c/0xc4
[ 25.905828] [c03cdd40] [c0201bd0] fs_enet_interrupt+0x528/0x70c
[ 25.976694] [c03cdd90] [c006b4b8] handle_IRQ_event+0x74/0x1e8
[ 26.045470] [c03cddc0] [c006ea74] handle_level_irq+0x80/0x108
[ 26.114250] [c03cdde0] [c001a44c] cpm2_cascade+0x38/0x6c
[ 26.177816] [c03cde00] [c000a1d4] __ipipe_ack_irq+0x18/0x28
[ 26.244510] [c03cde10] [c000a4e0] __ipipe_handle_irq+0x188/0x1b4
[ 26.316414] [c03cde40] [c000a610] __ipipe_grab_irq+0x3c/0x70
[ 26.384158] [c03cde50] [c0012704] __ipipe_ret_from_except+0x0/0xc
[ 26.457102] [c03cdf10] [c0008c48] __switch_to+0x94/0xbc
[ 26.519630] [c03cdf30] [c02b9f10] schedule+0x22c/0x41c
[ 26.58] [c03cdf80] [c0009650] cpu_idle+0xc8/0xd8
[ 26.640514] [c03cdfa0] [c0002398] rest_init+0xb4/0xcc
cpm2_cascade is dedicated to my board, but has nothing impressive :
static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
{
int cascade_irq;
while ((cascade_irq = cpm2_get_irq()) = 0)
generic_handle_irq(cascade_irq);
desc-chip-eoi(irq);
}
If you need the device tree, I can give it to you.
I am looking for any help, or known bugs, maybe ?
Thanks in advance for your help !
Regards,
JM
___
Xenomai-core mailing list
Xenomai-core@gna.org
https://mail.gna.org/listinfo/xenomai-core
Re: [Xenomai-core] Ipipe breaks my MPC8541 board boot
On 01/03/2012 06:49 PM, Jean-Michel Hautbois wrote:
cpm2_cascade is dedicated to my board, but has nothing impressive :
static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
{
int cascade_irq;
while ((cascade_irq = cpm2_get_irq()) = 0)
generic_handle_irq(cascade_irq);
Replace generic_handle_irq with ipipe_handle_chained_irq.
--
Gilles.
___
Xenomai-core mailing list
Xenomai-core@gna.org
https://mail.gna.org/listinfo/xenomai-core
Re: [Xenomai-core] Ipipe breaks my MPC8541 board boot
On 01/03/2012 06:58 PM, Gilles Chanteperdrix wrote:
On 01/03/2012 06:49 PM, Jean-Michel Hautbois wrote:
cpm2_cascade is dedicated to my board, but has nothing impressive :
static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
{
int cascade_irq;
while ((cascade_irq = cpm2_get_irq())= 0)
generic_handle_irq(cascade_irq);
Replace generic_handle_irq with ipipe_handle_chained_irq.
You have to fixup the eoi handling as well, check how this is done in
arch/powerpc/platforms/85xx/sbc8560.c.
--
Philippe.
___
Xenomai-core mailing list
Xenomai-core@gna.org
https://mail.gna.org/listinfo/xenomai-core
Re: [Xenomai-core] Ipipe breaks my MPC8541 board boot
2012/1/3 Philippe Gerum r...@xenomai.org:
On 01/03/2012 06:58 PM, Gilles Chanteperdrix wrote:
On 01/03/2012 06:49 PM, Jean-Michel Hautbois wrote:
cpm2_cascade is dedicated to my board, but has nothing impressive :
static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
{
int cascade_irq;
while ((cascade_irq = cpm2_get_irq())= 0)
generic_handle_irq(cascade_irq);
Replace generic_handle_irq with ipipe_handle_chained_irq.
Argh ! I didn't see it :) !
Thanks, it works.
You have to fixup the eoi handling as well, check how this is done in
arch/powerpc/platforms/85xx/sbc8560.c.
OK, I will check it, but didn't need to do it for making it work... :).
Thanks again !
JM
___
Xenomai-core mailing list
Xenomai-core@gna.org
https://mail.gna.org/listinfo/xenomai-core
