Good morning,
I write from the office; I would like my colleagues to work on Linux (Redhat
9), but in order to convince them I have to set up a computer perfectly
working; they are rather suspicious, and in some way I understand them: what
if tomorrow they need assistance?
(and if they need
Attention All School Staff, Personnel, and Students:
You Must Respond By 5 P.M. Wednesday, November 19, 2003
Avtech Direct is offering a limited allotment of BRAND NEW,
top of-the-line, name-brand Desktop computers at 50% off MSRP
to all Teachers, Students, Faculty and Staff.
All Desktops are b
hi Mattia Landoni
ple. visit intel website there you select graphic drivers & m.b model
download tar.gz format & rpm format you can go threw. ple. fallow site add.
http://downloadfinder.intel.com/scripts-df/filter_results.asp?strOSs=39&strTypes=DRV%2CARC&ProductID=865&OSFullName=Linux*&submit=G
Hola:
soy una alumna de la universidad Carlos III y estoy usando el gtk y
quisiera mover una ventana y cambiar su tamaño pero no me vale usando
XMoveResizeWindow.Quisiera cualqier tipo de ayuda.
Espero su respuesta
Rosa Maria Muñoz Reguillo
[EMAIL PROTECTED]
___
I am from Poland. I have Mandrake 9.1 Bamboo and I have following problem;When I want to play film from CD-ROM or from hard disk computer immediately go out from X Window and displays following text:
"Caught signal 11 server aborting". I think there is something wrong with driver for graphics ca
I install an application using an rpm file, and I would like for a shortcut
to the application to be placed on the desktop upon installation. Is there a
general place to where .desktop files can be placed? E.g a shortcut to the
application needs to be created for all user accounts in the system.
I
PLZ HELP ME...
I CANT INTERPRET ANY OF THESES MESSAGES .
XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer t
Hi,
I am new user of linux.
Now I want install XFree86 4.3 on Red Hat Advanced Server 2.1.
I do the following steps:
1 Download XFree86 4.3 from /pub/XFree86/4.3.0/binaries/Linux-ix86-glibc22
2 I use "sh Xinstall.sh -check " but the system tell me that
"Checking which OS yo
Hi all,
I would like to set up my own mame arcade cabinet, I saw that
lot of people use AdvanceMame that programs good frequencies
directly to the video card, but I don't want to use AdvanceMenu,
I want to code my own menu using SDL under X. But as I don't know
very much about this, I would like t
Hello all,
I am trying to use an TFT Lcd 5.6" screen on my computer with a trident 9685
tv-out 4mb pci card. When i use the vga port on a regular 15" sansung
monitor, xfree works very well with a 640x480 resolution, but when i try to
use the tv-out ntsc port of the camera, swiching the jumper o
> very much about this, I would like to know if it is possible to
> write a modeline for X so it will use a 640x480 resolution using
> a 25Khz horizontal frequency and a 60Hz Vertical frequency.
I've played around with the modeline generator at
http://xtiming.sourceforge.net/cgi-bin/xtiming.pl, bu
Hi All,
I've an Acer Travelmate 210 TXR with a Trident Cyberblade chipset graphic card.
If I work on Windows, I can use 2 monitor with a large desktop
(like Xinerama).
Now, I try to settings the Xinerama on Linux and Xfree 4.3 (my
distribution is Debian unsta
Okay. I've tried, repeatedly (and failed thus far) to get Xinerama with 24+8
overlay working with two MGA cards. I can get Xinerama OR overlay to work
with a dual-head MGA, but apparently overlay isn't supported on the second
head. So I tried two cards, and can't get them both to work. Sadly,
s
> I've played around with the modeline generator at
> http://xtiming.sourceforge.net/cgi-bin/xtiming.pl, but I haven't
> been able to come up with a modeline at exactly 25KHz. Simplest
> I could get away with was somewhere between 30 and 31KHz. I
> have my doubts whether you can run resolutions tha
On Tue, Nov 18, 2003 at 02:57:04PM +0100, MEGHAZI FABIEN wrote:
> > I've played around with the modeline generator at
> > http://xtiming.sourceforge.net/cgi-bin/xtiming.pl, but I haven't
> > been able to come up with a modeline at exactly 25KHz. Simplest
> > I could get away with was somewhere betw
The Trident driver doesn't currently support this mode. Sorry.
Alan.
On Tue, Nov 18, 2003 at 02:35:40PM +0100, Fabio Sirna wrote:
> Hi All,
> I've an Acer Travelmate 210 TXR with a Trident Cyberblade chipset graphic card.
> If I work on Windows, I can use 2 monitor with a large deskto
> I've played around with the modeline generator at
> http://xtiming.sourceforge.net/cgi-bin/xtiming.pl, but I haven't
> been able to come up with a modeline at exactly 25KHz. Simplest
> I could get away with was somewhere between 30 and 31KHz. I
> have my doubts whether you can run resolutions tha
You might study http://en.tldp.org/HOWTO/XFree86-Video-Timings-HOWTO/
It has most of the details. The refresh is (dot clock Hz)/(total x *
total y) and the scan is dot clock Hz)/(total x --the largest number in
the x part of the modeline) There may be limitations on the graphic
card and the
I believe you need to be running XFree86 4.3 for the Intel 845
graphics chip to work.
Mark.
On Tue, 18 Nov 2003, Paras Jain wrote:
> PLZ HELP ME...
> I CANT INTERPRET ANY OF THESES MESSAGES .
>
> XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) / X Window Sy
On Tue, 18 Nov 2003, MEGHAZI FABIEN wrote:
> Hi all,
>
> I would like to set up my own mame arcade cabinet, I saw that
> lot of people use AdvanceMame that programs good frequencies
> directly to the video card, but I don't want to use AdvanceMenu,
> I want to code my own menu using SDL under X.
Hi all,
I've upgraded my kernel, using a radeon 7500 mobility. However I lost
DRI. Now direct
rendering is off and I can't get it back on. I have radeon module from
xfree-drm loaded but it's not being used becase Xfree
is loading the radeon module that comes with xfree which it seems that
it
doesn
Title: Message
Hello,
I'd like to add a
new video driver to the future XFree86 release, but couldn't find any
information from the website for how to submit it. I appreciate if
someone can help me to obtain such information.
Thanks!
Terry
On Tue, Nov 18, 2003 at 01:24:04PM -0800, Terry Chang wrote:
> Hello,
>
> I'd like to add a new video driver to the future XFree86 release, but
> couldn't find any information from the website for how to submit it. I
> appreciate if someone can help me to obtain such information.
Hi Terry,
It'
> On Tue, Nov 18, 2003 at 01:24:04PM -0800, Terry Chang wrote:
> > Hello,
> >
> > I'd like to add a new video driver to the future XFree86
> release, but
> > couldn't find any information from the website for how to
> submit it. I
> > appreciate if someone can help me to obtain such informatio
Hello,
I tried to install XFree 4.2 on a Siemens Mobile 501, a laptop with
Neomagic 128XD graphicschip and ES 1869 soundchip.
When I try to play a sound while running X with the neomagic-driver,
the system freezes. This problem does not appear with the 3.3.6
XSVGA-server.
The distribution is deb
Hello XFree team,
I sent a mail some days ago but was not yet registerd at XFree86.Org.
In the meantime, I found out that the bug disappears when the
"noaccel" option is specified in XF86Config.
Regards,
Klaus Peichl
Original mail:
I have a problem with the S3 driver in XFree86 4.3.0 which
was no
Hi Marcel,
It's for our latest graphic product, VoyagerGX (SM501). Please check our
website for the details of VoyagerGX if you're interested.
Thanks!
Terry
-Original Message-
From: Marcel Mourguiart [mailto:[EMAIL PROTECTED]
Sent: Tuesday, November 18, 2003 1:45 PM
To: [EMAIL PROTECT
I have a single output device hooked to this card (845GL with i810
driver), a CRT capable of 85HZ @ 1025x768 - no matter what I try, the
device won't refresh at > 60 hz, confirmed by use of my monitor's
informative overlay. The issue is ostensibly related to the lines
(WW) I810(0): PGTBL_ER is 0
Hi,
I'm stuck now.
I figured out that I needed bison and flex and that I had to make a change to
the Imakefile of xc/lib/lbxutil/lbx_zlib, I needed to add -I../../../extras/
zlib. It seems that someone moved zlib files out of ../../zlib.
However, this next one is more difficult to resolve. In
Attention All School Staff, Personnel, and Students:
You Must Respond By 5 P.M. Thursday, November 20, 2003
Avtech Direct is offering a limited allotment of BRAND NEW,
top of-the-line, name-brand Desktop computers at 50% off MSRP
to all Teachers, Students, Faculty and Staff.
All Desktops are br
to whoever it may concern
I have a Digital model 3100 with a Pentium at 200 mhz with MMX technology.
The video card is built in
and it is
integrated S3 Trio 64v2/GX
PCI 64 bit graphics accelerator
with one MB SDram standard, upgradeable
to two MB ram
suppor
XFree86 version: 4.3.0
Redhat Linux 9.0
video card: onboard savage 4 video accelerator
Problem: The Xserver works well after installation and does not work once
I reboot the system. I tried to use the VESA generic driver for this. This
driver worked well when I used RHLinux 7.3 but not for 9.0
Good day,
After a shutdown and restart the XWindows stop working.
Attached is the log-file created. Please assist.
Thanks
Willem Cloete
Gen Re
Email: [EMAIL PROTECTED]
Phone: +27 21 4127750
Fax: +27 21 4127780
XFree86.0.log
Description: Binary data
33 matches
Mail list logo
