On Fri, 2003-06-13 at 00:10, Alex Deucher wrote:
there are alot of issues with dualhead and LCDs on PPC. I believe the
fix is to use fbdev, but I'm not sure anyone has gotten dualhead to
work yet. check the archives from last month.
I had it working on the M6 a while ago, I haven't yet tried
Can you check if the vbe module is loaded (and not unloaded) at this point?
Better yet, post your log file.
Egbert.
Alex Deucher writes:
I had this problem as well at one point when I was messing with the
savage driver. What was weird was I hadn't messed with any of the vbe
stuff. I
Ben,
Thanks for the information. I used fbset -x and updated XF86Config-4
accordingly.
All of the test results from my original post were without using the
kernel fbdev driver. I just now went ahead and added Option UseFBDev
to the lcd-related device section in XF86Config-4 and set BusID to
On Fri, 2003-06-13 at 17:08, Andreakis, Dean (MED) wrote:
Given this result I tried comparing the sections of code in the kernel
fbdev driver and the XF86 radeon driver that sets up the PLL and there
was just a few minor diff's in the default min/max values. I went ahead
and changed these to
Alex,
I went ahead and commented out the dri section and the Load dri, Load
GLcore and Load glx lines in the Module section of XF86Config-4 to
try and prevent the DRI drivers from loading but I still see the same
messages in the XF86 log file. Maybe I need to do something else to stop
DRI from
It's not the DRI per se... it's the radeon memory manager. it attempts
to statically allocate offscreen memory for use by the DRI, pixmaps,
etc. It has no effect on modes, so you can safely ignore it.
Alex
--- Andreakis, Dean (MED) [EMAIL PROTECTED] wrote:
Alex,
I went ahead and commented
On Fri, 2003-06-13 at 22:01, Andreakis, Dean (MED) wrote:
I went ahead and commented out the dri section and the Load dri, Load
GLcore and Load glx lines in the Module section of XF86Config-4 to
try and prevent the DRI drivers from loading but I still see the same
messages in the XF86 log
Hello
I am trying to create the amallest possible X for my X86 linuxbox.
Building X as is I get about 100MB in X11R6 directory
Building X as TinyX I get about 65MB in X11R6 directory
I wonder if is possible to get a minimal X in about 1-2 MB ?
TIA
___
Hi,
HorizSync 30-50
VertRefresh 47-110
The VertRefresh is not really realistic. Your DDC info shows you can do
about 75 Hz
(II) S3VIRGE(0): Supported VESA Video Modes:
(II) S3VIRGE(0): [EMAIL PROTECTED] ---
(II) S3VIRGE(0): [EMAIL PROTECTED] ---
(II) S3VIRGE(0): [EMAIL
Cristian Campeanu writes:
Hi there,
My name is Cristian Campeanu and I'm from Romania.
I own a Likom L - 403 monitor which a broke 3 times already by changing
resolution (the usual Ctrl+Alt+-) and a S3 Trio3D. I'm running RedHat Linux
7.2 with the 2.4.7-10 kernel and XFree 4.1.0
Hi,
I've got a Shuttle SB51G with the optional CV21 TV Out module.
http://www.shuttle.com/new/product/barebone/specs_b.asp?B_id=8
http://www.shuttle.com/new/product/barebone/specs_a.asp?A_id=14
Generally a linux user, normally a Debian user, I'm using Knoppix
temporarily as it comes with
Hello,
I have a logitech marble mouse, this is a strange trackball that has the
ball at center and four buttons, two classic standard buttons and the
other two are to simulate the wheel and go up and down on mozilla.
The mouse works very well but the third and four buttons won't work they
are
Hi All,
I've just installed Redhat 9.0 on my Compaq Evo 610c laptop.
The Xserver wotk fine with the laptop panel and gives me
a nice 1400x1050 resolution. However when I dock the laptop and
try to drive an external CRT monitor I get problems.
The attached XF86Config file will give me 1400x1050
On 2003.06.13 06:50, Gavin McCullagh wrote:
Hi,
I've got a Shuttle SB51G with the optional CV21 TV Out module.
http://www.shuttle.com/new/product/barebone/specs_b.asp?B_id=8
http://www.shuttle.com/new/product/barebone/specs_a.asp?A_id=14
Generally a linux user, normally a Debian user, I'm using
On Fri, 13 Jun 2003, Emmanuel wrote:
On 2003.06.13 06:50, Gavin McCullagh wrote:
I've got a Shuttle SB51G with the optional CV21 TV Out module.
With TV, the initial boot sequence gives a bunch of resolution options
or scan to probe. Several options work but they all amount to it
using
http://www.xfree86.org/current/XListInputDevices.3.html specifies that the name field
of the XDedeviceInfo data structure is a value in XI.h.
In practice, this is not the case. Is there an updated specification of what the field
value is?
Padraig
God, what I am tired of saying this: I need to see your log.
Furthermore, try the latest driver from - as the log mentiones clearly -
www.winischhofer.net/
Thomas
Ralf Haller wrote:
Hi,
I want to install the sis video driver on my MSI Hermes 650 barebone, in
order to have Xvideo support.
On Thu, Jun 12, 2003 at 09:10:51PM +0200, Wolfgang Jeltsch wrote:
On Thursday, 2003-06-12, 20:27, Mike A. Harris wrote:
On Thu, 12 Jun 2003, Wolfgang Jeltsch wrote:
why isn't there any information available on the XFree86 website and in
the manpages about activating DPMS under XFree86 3.3.6.
On Thursday, June 12, 2003, at 09:58 PM, Kelley Hilborn wrote:
When trying to configure X with xf86cfg, the screen flickers, looks
like
it's
about to go to a GUI, and then just shuts down. Logs me out of my
session.
From your XFree86.0.log:
(EE) I810(0): AGP GART support is not available.
I configured my dual head setup on my laptop using an SiS 650 chipset.
However, since the VGA is the primary, it seems that I either have to :
- have the VGA monitor on at boot time
- set ForceCRT1
The first case is obviously not very practical for a laptop since the
only monitor I am sure to
Hi,
My name is Paul Richard. I have installed RedHat Linux 7.3 on a HP NetServer Plus. It
has a Trident TVGA 9000 chipset which is found in the drivers list, but when I try to
start X it says no screens found. Any advice would be greatly appreciated.
Sincerely,
Paul V. Richard
TWNEOR Region
How do tell Xfree which to use when using startx, for example (sorry
if this is obvious :-)
Thanks
On Fri, 2003-06-13 at 11:58, Thomas Winischhofer wrote:
Philippe Moutarlier wrote:
I configured my dual head setup on my laptop using an SiS 650 chipset.
However, since the VGA is the primary,
I recently upgraded my computer (from FreeBSD 3.1 to 5.1), and now my monitor
will not go into suspend mode; it stays in standby.
I have this in my .xsession:
xset s 300 s blank dpms 1200 3600
So after 20 minutes, the monitor should go into standby mode, then after an
hour into
Philippe Moutarlier wrote:
How do tell Xfree which to use when using startx, for example (sorry
if this is obvious :-)
man startx
Thomas
Thanks
On Fri, 2003-06-13 at 11:58, Thomas Winischhofer wrote:
Philippe Moutarlier wrote:
I configured my dual head setup on my laptop using an SiS 650
Hi ,
I got a brand new lap top and trying to use the XFree86 under Windows VMWare
environment.
The message is attached below for more details.
Hope to find a solution soon. cheers. Gaja.
_
Help STOP SPAM with the new MSN 8 and get 2
On Fri, 13 Jun 2003, Gavin McCullagh wrote:
I've got a Shuttle SB51G with the optional CV21 TV Out module.
Generally a linux user, normally a Debian user, I'm using Knoppix
temporarily as it comes with XFree86 4.3 and I've not had the chance (or
rather the bandwidth) to get organized with
some pci info for the support team!
im using a ati 9700 (a little modified) in my dell dimension 4500 system
pci bus 0x cardnum 0x00 function 0x00: vendor 0x8086 device 0x2560
Intel Device unknown
CardVendor 0x1028 card 0x0142 (Card unknown)
STATUS0x2090 COMMAND 0x0106
CLASS
On Fri, 13 Jun 2003, Chris Rankin wrote:
Hi,
I'm experiencing occasional X-server crashes with 4.3, running on my
Linux 2.4.20-SMP machine. (The crashes also happen with 2.4.21, BTW.)
This machine has 1 GB RAM, dual 933 PIII-Coppermine and a Matrox G400
card. I am also using the current
Hi !!
I have a intel 845 glva motherboard running RedHat linux 8. Due to poor
graphical resolution, I recently downloaded te entire 4.3 version of
Xwindows (abt 70 mb) and installed it. Unfortunately, after installation (it
said the installation completed successfully), when i rebooted, i did
Alex Deucher wrote:
Another option that worked for a radeon user I was helping, was to set
up the video chip in mergedfb mode initally with crt1 forced on or with
the monitor attached. then use xrandr to resize the frame buffer on
the fly. so if you have two 1024x768 heads set up the initial
On Thu, 12 Jun 2003, Wolfgang Jeltsch wrote:
why isn't there any information available on the XFree86 website and in
the manpages about activating DPMS under XFree86 3.3.6. Option DPMS in
the Monitor section doesn't work.
Whatever the reason might be, XFree86 3.3.6 is _long_ since
On Thu, 12 Jun 2003, Alex Deucher wrote:
Date: Thu, 12 Jun 2003 13:49:43 -0700 (PDT)
From: Alex Deucher [EMAIL PROTECTED]
To: [EMAIL PROTECTED], [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
Content-Type: text/plain; charset=us-ascii
Subject: Radeon 9800 AGP driver
The xfree86 4.3.0 and xfree86
Hi, I would really appreciate it if someone can help me.
I'm using XFree86, version 4.3.0.
My graphics card is an S3 Pro Savage DDR
My monitor is a Philips 107S
I could run the X server with a resolution of 640x480, with 256 colors,
but anything higher than that gives me either a blank screen or
Hi All
It seems to appear that the Mandrake 9.1 default install uses software
acceleration. Can anyone explain briefly what I need to do to get
hardware acceleration running..
cheers
Allan
___
XFree86 mailing list
[EMAIL PROTECTED]
34 matches
Mail list logo