Re: [XFree86] Re: Radeon/XF86Config problems

Cool, just to clear it up. It may be an effect of it being unsupported, but its the driver that's specifying the second ID. I couldn't of made that up on my own :P. At 08:27 PM 10/8/2003, you wrote: On Wed, 8 Oct 2003, James Tanis wrote: >(II) Primary Device is: PCI 01:00:0 >(--) Assigning dev

[XFree86] Re: Contradictory informations about video card support

On Sun, 28 Sep 2003, Vincent Thomasset wrote: >Date: Sun, 28 Sep 2003 07:44:34 +0200 >From: Vincent Thomasset <[EMAIL PROTECTED]> >To: [EMAIL PROTECTED] >Reply-To: [EMAIL PROTECTED] >Content-Type: text/plain; charset=us-ascii >Subject: Contradictory informations about video card support > >Hi, > >

Re: [XFree86] Horizontal Sync Range and Vertical Sync Range

According to information I see on the web, this monitor supports horizontal frequencies up to 96 kHz. So I would guess: HorizSync 30 - 96 VertRefresh 50 - 120 or something like that. There are no 100 Hz modelines built into XFree86 though, so you'll have to make one. The gtf app tha

Re: [XFree86] i have a display problem

(--) PCI:*(0:15:0) unknown vendor (0x15ad) unknown chipset (0x0405) rev 0, Mem @ 0xfd00/24, 0xfc00/24, I/O @ 0x10e0/4 Looking this up on the web, this appears to be a VMWARE SVGA II v3.x It looks like there is a driver for this in XFree86 4.3. You should upgrade as your XFree86 vers

Re: [XFree86] Evaluation CD needed

Somebody familiar with TinyX should send him some pointers. Mark. On Thu, 9 Oct 2003, Pieter Hulshoff wrote: > > > Will one of the developers of XFree86 send this gentleman a proper response, > or shall I as a user pick this one up? > > Regards, > > Pieter Hulshof

Re: [XFree86] Where can I get the architecture of XFree86

There is alot of documentation in the xc/doc directory in the XFree86 source code. If you have specific questions, you should ask them. Mark. On Thu, 9 Oct 2003, ËïΪȺ wrote: > Dear Members of XFree86: > I am reading the code of XFree86,and it's not an easy job f

Re: [XFree86] Help!

If this happened while you were doing something that uses TrueType fonts (like web browsing), you might want to try replacing Load "freetype" with Load "xtt" in the XF86Config file. There are some known fatal conditions in the Freetype module. Mark. On Thu, 9 Oct 2003,

Re: [XFree86] that is a problem that i found after installing the linux. How to solve

I think you need to upgrade to XFree86 4.3. Your XFree86 version is substantially older than your graphics hardware. Mark. On Thu, 9 Oct 2003, Ong sianyaw wrote: > Hi, > this is the system that i found when i using "startx" command. can you help > me to solve it? >

[XFree86] Contradictory informations about video card support

Hi, i own an ISA Trident TVGA8900B vga card, and i would like to know whether it is supported or not by XFree 4.2.1... For instance, the XF 4.2.1 Driver status page says it is on 3.3.6 AND 4.2.1 but below, in the summary section, it is said : "The following (older) chipsets are supported in 3.3

[XFree86] (no subject)

Hello, sorry to bother you, I got monitor Sony CPD-G200P and i need to setup my XWindows to work in [EMAIL PROTECTED] But i just get [EMAIL PROTECTED] There is a only one vertical and horizontal sync range in my monitor manual, it brings my monitor to [EMAIL PROTECTED] Hz :( So my question is:

[XFree86] XFree86 4.4 reminder

This is a reminder that the XFree86 4.4 release is planned for mid December 2003, with 15 October 2003 being the final date for the submission of new features. See the release plans page on our web site for further details of the schedule . The 4.3.99.14

Re: [XFree86] Horizontal Sync Range and Vertical Sync Range

BlackCat Hack Palace Admin wrote: Hello, sorry to bother you, I got monitor Sony CPD-G200P and i need to setup my XWindows to work in [EMAIL PROTECTED] But i just get [EMAIL PROTECTED] ... There is a only one vertical and horizontal syn

[XFree86] FW:

Hello - I am getting the following error when starting windows. Any idea why? Thanks, Gary Gary E. Elliott Senior Technical Staff Member ALABS (AT&T Labs) 290 Davidson Ave., Somerset N.J 08875 rm. E2B037 732-805-2329 -Original Message- From: Gary E Elliott 2329 E2B037 [mailto:[EMAIL

[XFree86] Re: Pseudocolor mode handling (further details)...

On Thu, 9 Oct 2003, MARTIN Patrice - GRE ( [EMAIL PROTECTED] ) wrote: >You're completely right! This is caused by the render module. >One solution is to use a nVidia card with the driver from nVidia. They have >an option in >their driver 'NoRenderExtension' which disables the render module and >gi

[XFree86] Pseudocolor mode handling (further details)...

Berge, Harry ten wrote: You're completely right! This is caused by the render module. One solution is to use a nVidia card with the driver from nVidia. They have an option in their driver 'NoRenderExtension' which disables the render module and gives you your precious colors in pseudocolor

Re: [XFree86] All annoying error in I830WaitLpRing() in some details

On Thu, Oct 09, 2003 at 03:47:22PM +0200, Egbert Eich wrote: > Nicolas Joly writes: > > * NoAccel ... ok > > * Accel... KO > > * Accel + SWcursor + 4Mo ... KO > > * Accel + NeedRingBufferLow... KO > > > > For the "NoAccel" case, i succes

[XFree86] Horizontal Sync Range and Vertical Sync Range

Hello, sorry to bother you, I got monitor Sony CPD-G200P and i need to setup my XWindows to work in [EMAIL PROTECTED]   But i just get [EMAIL PROTECTED]... There is a only one vertical and horizontal sync range in my monitor manual, it brings my monitor to [EMAIL PROTECTED] Hz :( So my que

Re: [XFree86] All annoying error in I830WaitLpRing() in some details

Nicolas Joly writes: > * NoAccel... ok > * Accel ... KO > * Accel + SWcursor + 4Mo ... KO > * Accel + NeedRingBufferLow ... KO > > For the "NoAccel" case, i successfully switched about 20 times to the > 4 text consoles and went back to X

[XFree86] i have a display problem

hi i have a display problem for my red hat linux installation. i am useing a HP Ultra VGA 1280 model d2818a iam attaching the errir log which it has generated. please help us regarding this. __ Do you Yahoo!? The New Yahoo! Shopping - with improved product sea

Re: [XFree86] Evaluation CD needed

Will one of the developers of XFree86 send this gentleman a proper response, or shall I as a user pick this one up? Regards, Pieter Hulshoff ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86

Re: [XFree86] See this log file , i`m getting errors with xfs sayin can`t open "fixed" fonts

On Thu, 9 Oct 2003, Suresh Babu wrote: Hai, X Font Server is not running in your machine. start/restart it mannually and start the X. As root : /etc/rc.d/init.d/xfs restart HTH :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known i

[XFree86] Where can I get the architecture of XFree86

Dear Members of XFree86:  I am reading the code of XFree86,and it's not an easy job for me.It will ,I think, save me a lot of time if I know the architecture of XFree86. Is there specifications of the architecture of XFree86? Where can I get it?  Your truely!  Weiqun Sun

[XFree86] See this log file , i`m getting errors with xfs sayin can`t open "fixed" fonts

- (on the network) email-body was scanned and no virus found -D-Link R & D E-Mail Traffic--- XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System (protocol Version 11, revisi

Re: [XFree86] Mouse restrictions under dual-head config

>Thank you. That was actually what I had in mind (and I had discovered >that earlier). It's just that it feels like kind of a hack to do so. I >would have thought that there would be a "real" way of doing it, if >you see what I mean. > >Oh, and by the way. What I would _really_ want, is to run two

[XFree86] Jadilah Wirausaha sedini mungkin

Satu kesempatan tips menjadi wirausaha dengan modal sangat amat minim sekali dan mudah. Kunjungi http://mediapromosi.net/index.php?id=946904 Terapkan langkah untuk maju ke depan dalam promo ini. Sukses selalu. ___ XFree86 mailing list [EMAIL PROTEC

[XFree86] Evaluation CD needed

Dear Sir, We have been asked by our partner "Fujitsu Lt., Japan" to evaluate some microbrowsers,Filesystem,Multimedia and GUI tools that can work in smaller devices such as embedded and handheld devices and appliances. We have choosen your product for evaluation before submitting the results to o

[XFree86] zinindie chance deines lebens

die chance deines lebens nur 1dollar und danndownline weltweit bauen mfg stefan balzer http://www.keingeld.net/base-moneygod.htmJORVCFECGMVTLWSC ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86

RE: [XFree86] Pseudocolor mode handling...

> Hi, > > I still have problem using XFree86 in Pseudocolor mode. > When I use XFree86 V4.1.0 in Pseudocolor Mode, all works fine. I mean > that when the X server starts, then no default color are > allocated, all > the 256 colors are free. > But still version 4.2.0 (V4.3.0 too), when I use XFr

[XFree86] Help!

Hi People! I'm new to Mandrake Linux but no to Unix world, so I now a little bit about the OS... Can you help me with this message errors? The "X Server" dies with "Signal 11" while I'm working and I loose everething, this happends too much and I can't work, also I get some "core dump" messages s

[XFree86] that is a problem that i found after installing the linux. How to solve

Hi, this is the system that i found when i using "startx" command. can you help me to solve it? thank Regards benny _ Download the latest MSN Messenger http://messenger.msn.com.my XFree86.9.log Description: Binary data