Hi,
I tried current cvs from anoncvs.xfree86.org on Linux i386 and have hit several
problems:
1)
cannot compile krb5 support. I use krb5 implementation from ftp://ftp.pdc.kth.se/pub/heimdal/src
, so you should BTW update docs saying not only MIT Krb5 is needed for this. They are compatible
Michel Dnzer wrote:
Hi,
sorry for the delay, I didn't get messages Cc: ed, but have subscribed noew and
browsed
archive. ;)
On Fri, 2004-08-27 at 09:14 -0700, Tim Roberts wrote:
(**) RADEON(0): *Mode 1400x1050: 108.0 MHz (scaled from 0.0 MHz), 64.6 kHz, 60.8
Hz
(II) RADEON(0): Modeline
Martin MOKREJ wrote:
Actually, I didn't know earlier but the radeon should not continue but make X rather die as I
have AGP 9200 card, and that's actually the reason why I have to use ati as driver. The naming
is bad, but empirically I have figured out which drier works and aslo gives DRI
Dr Andrew C Aitchison wrote:
On Thu, 16 Sep 2004, [ISO-8859-2] Martin MOKREJ wrote:
Martin MOKREJ wrote:
Actually, I didn't know earlier but the radeon should not continue but make X rather die as I
have AGP 9200 card, and that's actually the reason why I have to use ati as driver. The naming
On Mon, 9 Feb 2004, Rahul Sawarkar wrote:
Martin MOKREJ Wrote:
-
Ah, sorry I haven't realized the difference between those 2 tests. :(
So Radeon 9200, AGP8x but in XF86Config only 4x speed
--
Under 'Section
Hi,
I tried latest kernel and I see some error logged by the system, Should I
worry?
atkbd.c: Unknown key released (translated set 2, code 0x7a on
isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a
Hi,
I'm a bit playing around with my comp and finally figured out why on one
host I did not get framebuffer on console running - the VESA kernel module
wasn't compiled into kernel. So now I have framebuffer console, but X don't
start anymore. They used to work with radeon module and dri, but the
On Sat, 31 Jan 2004, hanasaki wrote:
4 reps @ 2372.4955 msec ( 0.4/sec):GetImage XY 500x500 square
1200 reps @ 5.1985 msec ( 192.0/sec): ShmPutImage 500x500 square
1200 reps @ 5.2014 msec ( 192.0/sec): ShmPutImage 500x500 square
1200 reps @ 5.2001 msec (
On Sun, 2 Nov 2003, Pieter Hulshoff wrote:
On Sunday 02 November 2003 20:10, Billy Biggs wrote:
So you compared the output of x11perf or xvtest ? I'm curious if
you have stats for those.
I don't have xvtest on my computer, but here's the output from x11perf:
x11perf - X11 performance
(==) RandR enabled
The x11perf output is the one at the very end. Thanks!
Martin
On Sat, 31 Jan 2004, [iso-8859-2] Martin MOKREJĀ© wrote:
On Sun, 2 Nov 2003, Pieter Hulshoff wrote:
On Sunday 02 November 2003 20:10, Billy Biggs wrote:
So you compared the output of x11perf or xvtest ? I'm
On Sat, 24 Jan 2004, David Dawes wrote:
Hi,
I see the patch already comitted to xc tree so wanted to compile xfree86
with -rpath ...
On Sat, Jan 24, 2004 at 06:09:46PM +0100, Matthieu Herrb wrote:
David Dawes wrote (in a message from Saturday 24)
If there is no general consensus, I will
On Tue, 27 Jan 2004, David Dawes wrote:
On Tue, Jan 27, 2004 at 03:22:35PM +0100, Martin MOKREJS wrote:
On Sat, 24 Jan 2004, David Dawes wrote:
I will stick to -rpath on Linux, so what should I do to compile X with
it on Linux and where is it documented, Dave?;)
Add the following line to
systems will need either -rpath or -R as
noted in this thread.
Ideas?
Martin
On Wed, Jan 07, 2004 at 08:00:27PM +0100, Mario Klebsch wrote:
Hi!
Am Mittwoch, 07.01.04 um 14:00 Uhr schrieb Martin MOKREJĀ:
I believe -Wl,-rpath,$(SHLIBDIRPATH) should be used on Linux and
possibly
all Unix
On Thu, 8 Jan 2004, David Dawes wrote:
On Thu, Jan 08, 2004 at 09:11:59PM +0100, Martin MOKREJS wrote:
On Thu, 8 Jan 2004, David Dawes wrote:
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/krishna.mogua.com:0
On Thu, 8 Jan 2004, David Dawes wrote:
On Thu, Jan 08, 2004 at 09:44:05PM +0100, Martin MOKREJS wrote:
On Thu, 8 Jan 2004, David Dawes wrote:
On Thu, Jan 08, 2004 at 09:11:59PM +0100, Martin MOKREJS wrote:
On Thu, 8 Jan 2004, David Dawes wrote:
_XSERVTransSocketOpenCOTSServer:
Hi,
I've reported the following bug:
http://bugs.xfree86.org/show_bug.cgi?id=1062
I believe -Wl,-rpath,$(SHLIBDIRPATH) should be used on Linux and possibly
all Unix platforms. Running ldconfig did not help on my system but
LD_LIBRARY_PATH did. But, that's not a solution, because
On Wed, 7 Jan 2004, Alex Deucher wrote:
How about updating http://www.xfree86.org/current/Status6.html#6 ?
And about adding a section about upcoming 4.4.0?
Also, this very same page might link to
http://www.xfree86.org/current/DRI3.html#7 .
3D is only supported on radeon cards up to the 9200.
Hi,
the documentation says:
http://www.xfree86.org/current/DRI4.html#8
What happens if I install Mesa-5.0.2 over the /usr tree?
It would be worth of the effort documenting the configure flags needed for
Mesa to get same result as when using the xmkmf/Makefile stuff xc/ tree
has. For example,
Hi,
using 2.4.23-pre8 kernel and previous versions on ASUS L3800C I'm
getting:
(II) Module pcidata: vendor=The XFree86 Project
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config
19 matches
Mail list logo
