Supakit Charnvanichborikarn wrote:
I'm trying to get the dual head work on Fujitsu s6010 laptop, which uses 830M
as VGA card (i810 driver). However, I got the error message:
Fatal server error:
Requested Entity already in use!
Does that mean XFree86 doesn't support dual monitor mode in
Emil Zackariasson wrote:
Hi!
I am making my own distro and I am having some problems with the
Xserver. I have installed it and it had no complains about that but now
when I try to start it the following message comes up before the
loading of the other parts. I dont know what this is or
Kaz Zielinski wrote:
Could not init font path element unix/:7100, removing from list!
Fatal server error:
could not open default font 'fixed'
Start the X Font Server (xfs):
/sbin/service xfs start
Strongly considering upgrading to a maintained distribution, as Red Hat Linux 8
is no
pico leto wrote:
It's a ATI Radeon Rage 6 32 meg.
In dmesg it comes up as pci0: ATI model 5144 graphics accelerator at 11.0
irq 12
scanpci -v or lspci -v output?
So when im running xf8config im not seeing this video card in the list.. Ami
i missing something? Im kinda new to bsd but not
[EMAIL PROTECTED] wrote:
Could not init font path element unix/:-1, removing from list!
The X Font Server (xfs) does not appear to be running on your system.
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Nathaniel Bevins wrote:
Has anyone been successful in getting a four head display working?
I have an Nvidia FX 5700 with dual output and an ATI 9200SE PCI with dual
output. I can get 2 head working with either card, but when I try to use both
cards my box locks up. I have tried upgrading to
[EMAIL PROTECTED] wrote:
Addendum to following, reoccurring post: Somebody at Lest tell me how
to uninstall and start over... Is this post getting through??
...
Somebody mind giving me a hand here. Please...? I've been asking nicely.
...
Have you been reading the replies from Matthieu
root wrote:
could not open default font when reporting a problem related to a server
crash, please send the full server output, not just the last message. XIO:
fatal IO error 104(Connection reset by peer) on X server :0.0 after 0
request (0 known processed) with 0 events remaining. please try
E'very Ware wrote:
The only consistant thing that I see is this line right before it
crashes (in xdm-errors)
(==) Using config file: /etc/X11/XF86Config-4
Could not init font path element unix/:7100, removing from list!
Fatal server error:
could not open default font 'fixed'
Which
Alexandru Goia wrote:
(1) I have the Slackware 7.0.0 disk (1999), which contains
X Free , version 3.3.5. My video board is a S3 Trio 3D/2x,
AGP, 86C 362.
I managed to run perfectly X Free with Slackware :
-- 9.1 and 4.3.0
-- 8.0 and 4.1.0.
Why try to run such an ancient
J Mc. wrote:
Ok, last night i booted down Freebsd then booted it back up about a hour
later. ( thought i was leaving, when i was just going out side for a wile). i
cam back and turned the computer on, booted up, loged in, then i type
startx i get this error.
Check the log file
Myklebust Jan-Nicolas wrote:
I have a problem while trying to install the media player VLC on a linux
redhat 9 distribution. I get a failed dependencies problem indicating that
VLC needs libXinerama.so.1 This rpm file is supposed to be in the Xfree
package but in which one? Do you need a patch
King Kassle wrote:
I have S3 Virge GX cooperated with 3dfx Voodoo2
I also tried to use the Xfree 3.x S3V driver to replace
the Xfree 4.4 driver, the result is good but when exit the
console screen also crumple like the 4.x.
I strongly recommend that you do not mix and match drivers from
Pieter Hulshoff wrote:
Hello all,
When playing with xmame, I've noticed that software scaling is extremely slow
on SuSE 8.2 with my radeon 9000 card. I have games dropping from 500 fps to
20 fps! I've tried the same thing with Morphix (with the same version of
XFree86, and the same
Pieter Hulshoff wrote:
On Friday 23 April 2004 16:20, Michael Taylor wrote:
When playing with xmame, I've noticed that software scaling is extremely
slow on SuSE 8.2 with my radeon 9000 card. I have games dropping from 500
fps to 20 fps! I've tried the same thing with Morphix (with the same
Rolf Andrews wrote:
I have been trying to get Linux 9 to start for a few days now. it says
it cannot start the X server (your graphical interface). I have the
Radeon 9000 Pro graphics card and the ViewSonic E771 Monitor, both of
which I select.
It futher complains about.
(WW)
[EMAIL PROTECTED] wrote:
I posted this question a few days ago and have not seen
any comments from it so, I am asking again hoping it did
not really make it to the list. I apologize if it did.
http://www.xfree86.org/mailman/listinfo/xfree86/
This page lists 2 web based archives you could
Pieter Hulshoff wrote:
Nothing in the XFree86.0.log about agp or dri, other than dri having been
enabled, and nothing in /var/log/messages either. :( I can imagine dri not
being enabled in 3D as 3D itself is disabled, but it appears to be available
for 2D. Is there a 2D status program as
john camp wrote:
i have a registered redhat linux 8.0. and my linux gui will not work on
bootup.
Could not init font path element unix/:7100, removing from list!
Fatal server error:
could not open default font 'fixed'
You need to enable the X Font Server (xfs) on bootup as well. You can
Harold Sawyer wrote:
Hi!
I am having oodels of problems trying to install and load the nvidia
driver for my geforce2 mmx200 card. I have Mdk 9.2 installed on an
anthlon machine.
I have tried literally every way I found through searches on the web and
I get ¨screen(s) found, but none
MICHAEL PLEMMONS wrote:
I was running KDE 3.2.1 and was selecting the Tools menu in Konquerer
when the X server crashed with this error message. The menu did not
complete drawing whenthe server crashed. The computer has the following
configuration
Since this appears to be an actual bug, you
Mikhailov Anatoly wrote:
Hello.
I have a optical mouse Defender 1300 PS/2. On this mouse places 5
button, how i can use it? And default driver Microsoft mouse is not
http://kerneltrap.org/node/view/2199
Search for My extra buttons don't work in X.
C H ! C OoooOooo wrote:
i use redhat 3
xfree86 4.4.0
P4 titan motherboard with built in Intel 845GL chipset,
wen i was installing xfree many folders couldn't be created but it
worked, anyway wen i configure it i cant find the card in the list of
cards and i dont knw how to setup it, and
KSSP wrote:
Dear sir,
I installed RH linux 8.0 in my machine. But now I can't get the display. I
am sending the system details. Please help me.
P4 1.70, Mother Board : Intel D845GLAD, HDD 40 GB, RAM : 256 MB.
Red Hat Inc. no longer supports (by producing updates) for Red Hat Linux 8, so
amol chandurkar wrote:
my x windows is not starting due to some problem
(II) LoadModule: bitmap
(WW) Warning, couldn't open module bitmap
(II) UnloadModule: bitmap
(EE) Failed to load module bitmap (module does not exist, 0)
(II) LoadModule: pcidata
(WW) Warning, couldn't open module
naju wrote:
(II) Loading sub module vgahw
(II) LoadModule: vgahw
(WW) Warning, couldn't open module vgahw
(II) UnloadModule: vgahw
(EE) I810: Failed to load module vgahw (module does not exist, 0)
(II) UnloadModule: i810
(EE) Screen(s) found, but none have a usable configuration.
What does
Curt, WE7U wrote:
On Fri, 16 Apr 2004, Curt, WE7U wrote:
I'm running an application on linux. Every once in a while (two
times so far this week) the application will fall over with this
message:
XIO: fatal IO error 105 (No buffer space available)
Where does one go to get the ear of the
Mahamad Saleem wrote:
(EE) Unable to locate/open config file
(EE) Error from xf86HandleConfigFile()
You should create a X11 configuration file.
XFree86 -configure
or
redhat-config-xfree86
___
XFree86 mailing list
[EMAIL PROTECTED]
[EMAIL PROTECTED] wrote:
I'm running PCLinuxOS with Kernel 2.6.4 and KDE 3.2. The hardware is a Dell
Inspiron 1100 Laptop, integrated Intel extreme graphics, 845G chipset. Uses
i810 driver. Everything worked fine under Xfree 4.3. 3D acceleration etc. I
upgraded to XFree 4.4 and now I can't
Jarrod Wilkes wrote:
I am running Debian Linux on a new IBM laptop. The video card is the ATI
FireGL T2 128MB. I looked through the documentation and it doesn't seem
Which version of XFree86 are you running? Debian 3.0 'woody' (stable) was
running a rather dated version the last time I checked,
chung wrote:
Whenever i move the mouse, my xwindow halt... I am using redhat 7.3 with acer
2 button PS/2 mouse
Can you give us more details, like your configuration file (/etc/X11/XF86Config)
and the log file (/var/log/XFree86.0.log)?
BTW: Red Hat Inc. is no longer supporting Red Hat Linux
Frans Andersson wrote:
Section Device
Identifiers3kortet
Drivers3virge
BusIDPCI:0:13:0
Screen2
EndSection
My log says:
--- XFree86.0.log - snip ---
(WW) S3VIRGE: No matching Device section for instance (BusID PCI:0:13:0)
found
What's the
Andreas Krebs wrote:
Now, I would like to get rid of the virtual resolution 1400x1050
when I am working with 1024x768.
Is there a way to switch the virtual resolution on the fly or
do I need to start a second Xserver.
If I understand your request, yes. You just need to simplify your Section
Edwin Lee wrote:
...
3. Successful installation has been shown.
4. Continue to run into login screen and a window prompt of X cannot be loaded
occurs.
5. Choose yes to run the configuration with lots of Monitor and Display type that
I can select.
I try many different combination;
Demon wrote:
Hello, xfree86.
?
(==) Using config file: /etc/X11/XF86Config-4
Data incomplete in file /etc/X11/XF86Config-4
Undefined Monitor Monitor0 referenced by Screen Screen0.
You need to fix this error. There is no Monitor section called Monitor0 in
your configuration file
Frans Andersson wrote:
Michael Taylor wrote:
Frans Andersson wrote:
Section Device
Identifiers3kortet
Drivers3virge
BusIDPCI:0:13:0
Screen2
EndSection
My log says:
--- XFree86.0.log - snip ---
(WW) S3VIRGE: No matching Device section
Ariel Alonzo Medina Vázquez wrote:
Friends on Internet told me to check:
xfs startIt is OK
When I invoke xserver by mean 'startx' the netx
message display:
Could not init font path element unix/:7100, removing from list!
Fatal server error:
could not open default font 'fixed'
[EMAIL PROTECTED] wrote:
Hi all. I'm having a bit of a problem with my x installation.
It seems to have come from no where. Prior to today,
everything was working fine, I had not experienced any
problems. I rebooted my machine because of a problem I was
having that turned out to be an bad
[EMAIL PROTECTED] wrote:
The system has/had shown no signs of instability prior. I
occasionally run a distributed computing program that is very
sensitive to cpu/memory instability ([EMAIL PROTECTED]) and have
not seen any instability. Just to verify as you suggested,
multiple kernel
[EMAIL PROTECTED] wrote:
is there any harm (or benefit) to disabling xkb in xfree86config?
i ask this because i'm using a wireless keyboard and unless xkb is disabled i
get 2 characters for every keystroke pressed, lliikkee tthhiiss.
Make sure you don't have duplicate keyboard entries in
shamz khota wrote:
hi i am trying to configure my hp/compaq notebook
i cannot get the 3d working i.e all games like tux racer
doesnt work
Doesn't work at all, or is too slow to be playable?
For maximum 3D acceleration you may need to install the ATI binary drivers for
XFree86.
For more
Streiner, Justin wrote:
OS: FreeBSD 5.2.1
X: XFree86 4.3.0
Card: Matrix Millenium G450 PCI
It seems like FreeBSD 5.2.1 has an mga driver built-in, but when I try to
start X after building a configuration, the display completely locks up.
Could you include the log file (XFree86.0.log)? The
Kiran wrote:
i have a rehat linux m/c in which no KDE / GENOME install but it has X
componants, startx works with the grid like struture. i want insatll a
application which needs gnome, now i don wan install Gnome on the existing
m/c . But can i get the x components of anoteher m/c which has
Ganea Daniel wrote:
(EE) NVIDIA (0):Failed tp initialize the NVIDIA
Graphics Device!
(EE) NVIDIA (0):***Aborting***
(EE) Screen(s) found but none have a usable
configuration
I expect a answer to my problem,because i don't know
what to do,i can work in text mode ,but i cannot use
the
[EMAIL PROTECTED] wrote:
Can't i solve the problem in any other way? I'm running debian, and there are
no packages made until now. and also i'm new to debian so it will be hard for
any other suggestion ? i mean it has to be sth. with kde and xserver
together, because it runs with icewm...
Eric Pietrocupo wrote:
Hello
Is there a way in Xfree to invert the mouse button for left handed
user ( left button becomes right, right- left ).
man xmodmap
http://www.xfree86.org/4.4.0/xmodmap.1.html
Examples
http://www.xfree86.org/4.4.0/mouse7.html#39
Rubiolo Jeronimo-ajr037 wrote:
Hi All, I have updated to the latest kde package version in a RH 7.2 and since the
upgrade I'm getting the following error message when running startx:
Fatal server error:
could not open default font 'fixed'
Restart your X Font Server, 'xfs', e.g.
Lise Moorveld wrote:
Just a quick question. On the XFree86 Security page
http://www.xfree86.org/security there are three security issues that
have apparently been fixed in release candidate 4.3.99.903. However, in
the release notes of 4.4.0 http://www.xfree86.org/4.4.0/RELNOTES.html
there is
Kamagurka wrote:
no, i doublechecked that.unix98 ptys are definetely enabled.
what is a .initrc file, what does it do, and what will happen when i
rename it? should i rename it to xinitrc or .xinitrc?
Sorry, I had a typo in my message, I meant rename .xinitrc to xinitrc.
Kamagurka wrote:
this problem has me going nuts and effectively stops me from using linux
for 2 weeks now, so any help would be appreciated.
upon starting X with the command startx the screen goes black, then the
Nvidia splash shows up for half a second, and then i'm back at the
prompt with
Yuri Grebenkin wrote:
Does an ATI Radeon 9000LE has the same chip? Would it be fully supported
as just a 9000.
I believe that the LE is just slower / less RAM. Should be fine.
Would an ATI Radeon 9200 be fully supported? Does it use the same chip
as 9000?
The 9200 works fine in 2D, it does
Maurício wrote:
HI, i dont use linux very well, my
distro is SLACKWAVE 8.1
Your best solution is to upgrade to a current Linux distribution. Slackware is
currently 9.1 (as of September 2003).
Xfrre86. version 4.20 /Xwindow system (protocol
The current release of XFree86 is 4.3.0, it
Kamagurka wrote:
it did not work before i enabled the glx extensions...
however, if i see the splash screen (crisp and clear, mind you) doesn't
that mean that the problem is not graphics related?
I believe the splash screen is fixed size, so it ignores your configuration
file. I am not sure.
Virginie wrote:
(==) using config file : etc/X11/XF86Config -4
[EE] Unable to open /usr/X11R6/lib/modules/extensions/libglx.so
[EE]Failed to load module usr/X11R6/lib/modules/extensions/libglx.so
(open failed 2)
[EE]Failed to load module nvidia (module does not exist, 0)
[EE] No devices
Wesley Hobbie wrote:
yes, but since I am using nv rather than nvidia (due to it not working),
it lists nvidia and says unused.
Your first message had a configuration file showing you using 'nvidia' driver.
You cannot freely mix and match with the 'nv' and 'nvidia' drivers (they use
different
Kamagurka wrote:
as i wrote, when i run XFree86 i get a black screen with a crossshaped
black cursor. no more.
That's fine, that's how it is suppose to look, without an window manager.
___
XFree86 mailing list
[EMAIL PROTECTED]
Alexandrescu Ciprian wrote:
Please help!I just installed winlinux2003!During boot it hangs at
...
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
...
(--) PCI:*(1:0:0) NVidia
Bibelwerfer wrote:
i encountered a crash of my x server during duty. i was shuting down
the server in order to refresh after i installed the xearth software (i
Could not init font path element unix/:7100, removing from list!
Fatal server error:
could not open default font 'fixed'
Check
Thomas Krebs wrote:
Hi,
I have a nvidia based (pny) Quadro 4 750 XGL and a HP 2025 monitor.
I'm using it with W2K with the DVI-I interface which is running fine.
I also installed Redhat Linux 9 and tried X. the X server starts
(as I can see from the XF86.log file) but there is no output on
lorgio wrote:
i got a problem at starup with my linux system ( Red Hat 9 ),
the attachemet have the log file from /var/log directory,
also can't start my xsystem with the startx line command,
(WW) Warning, couldn't open module bitmap
(II) UnloadModule: bitmap
(EE) Failed to load
Robert C wrote:
Hello. Im setting up Linux from Scratch on a Compaq 12XL300 laptop . My issue
is when I run X, it insists on going out the external monitor port, to detect
for monitors. If I have a monitor plugged in, it initializes my lcd no
problem, and everything works. But if no monitor is
Luquette, Mark wrote:
The computer is a Dell Dimension 2400 (Windows 2000) using on the
motherboard video chips Intel 82845G/GL/GE/PE/GV
XFree86 Version 4.2.1 (for OpenBSD) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
If the
ruben wrote:
Does X windows support the Diamond Stealth PCI S3 Trio64 card???
http://www.xfree86.org/current/Status.html
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Harshvir Sidhu wrote:
Hello Sir/Madam,
Myself Harshvir Singh Sidhu. I am having a DELL
PC 270 with 865 chipset Intel. We have installed
Redhat 9 on it and it is giving an XServer error.
Fatal I/O Error 104 (Connection Reset by Peer) on
XServer :0.0 after 0 requests (0 known
chandra sekhar wrote:
Hello everybody.
Recently i installed Redhat linux 8.0 on MSI Motherboard which has
intergrated S3 Prosavage 2d/3d display card.The problem is i am not able to
Boot linux in to GUI mode.Can pls any body tell me how to congfigure s3 in
linux.
Please include the log
[EMAIL PROTECTED] wrote:
I have the same card. Diamond Stealth 64 DRAM S3 Trio64 on my
...
with XFree86. I tried to get help on forums and I am told the card is
supported but it doesn't work. Various hardware compatibility charts I
have found on the web also say this card is supported but it
Jonathan McLean wrote:
Also, i brought my XF86COnfig-4 file back to its
supposedly original setup and normally it would boot
startx and the mac monitor wouldnt work. Now i get an
error stating that no device is loaded and that no
screens are found:
(II) v4l driver for Video4Linux
(II)
jean-christophe valiere wrote:
I decided last week to update to XFree 4.3.0 and the
X doesn't start ant more. It seems that the radeon
driver fail to work with my Monitor.
Here is the Error:
Screen(s) found but none of them has a usable
configuration.
Matthieu Herrb wrote:
Many Linux distributions ships X with '-nolisten tcp' as the default
option. This means that the X server won't accept remote connections.
You need to use ssh X11 forwarding to connect remote applications in
this case.
I don't know if this is the case for fedora.
Fedora
Technical Team wrote:
Recently I have installed Redhat 9 and mandrake 9 on my system. But after
completing the installation part, I am not able to get into GUI mode as
the error message says that No Screen Found.
Please do not send any followups to [EMAIL PROTECTED], as that mailing list
Jonathan McLean wrote:
Okay, i do not have anyone who can teach me hand son
about linux, and so im still stumbling along. I
cannot access the file with another computer because i
cannot save it as a txt file. This is what i was
going to do: save my log as a txt file, copy it to a
floppy,
NUKE THEM wrote:
this message appears over 500 times in my XFree86.log.
I googled and found I'm not the only one with this messageflood.
But I found no responses telling:
What does this message mean?
How can I solve the problem?
The message is generate because you are using a binary
[EMAIL PROTECTED] wrote:
I am trying to install RedHat Linux 7.0 on my KDS notebook. The installation went
fine, except for the X-Server. It seems that 7.0 did not support my combination of
hardware, so I decided to update my X-Server. I downloaded and
installed 4.0.2 libc22 then 4.0.3
David Hansen Jr. wrote:
I recently moved from Red Hat 9 to Fedora 1. In RH, my resolution
colors were fine. I had 1024x768 in 24-bit. When I moved to Fedora,
When I try to run XFree86 in the same settings, it locks. The best I
can do is 1024x768 in 8-bit. I've got an ATI Radeon 7000
Abijith K wrote:
Server Error.
My X server doesn't start and I don't know how to add UNIX_SOCKETS to
the kernel so that I can startx please help me.
If you are using a Linux distribution, use a kernel from the distribution, not
your own. If you are using *BSD use a GENERIC kernel config.
Miah, Shehab wrote:
I get the following messsage when I try to start the GUI desktop of
Redhat Linux 9 by typing startx:
(EE) Unable to locate/open config file
(EE) Error from xf86HandleConfigFile()
It cannot file the config file, which is usually located at /etc/X11/XF86Config
in Red Hat
Frank v Waveren wrote:
I'm trying to coerce a Logitech MX500 mouse (pretty!) into working
with XFree86. The weird thing is it generates multiple button events
for the scroll up, scroll down buttons sitting above and below the
scroll wheel:
Also, though this has been noted by others, the
Admin wrote:
I have isntalled Redhat 9.0 and whever i give command for startX it show the
follwing attached message. Can u pelase throw some light on what do do next.
(EE) Unable to locate/open config file
(EE) Error from xf86HandleConfigFile()
It is not finding any config files (Red Hat Linux
Youssef Aoun wrote:
The server cannot Identify my screen, please help.
...
XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
If the server is older than 6-12 months, or if your card is
newer than
Nestor Roldan wrote:
Dear Linux friends ,
We need to install the G450 Matrox Video Card on 7.0 Linux Mandrake and the
library doesn`t have it , My current system have a G200 video card but it
The Matrox G450 is supported in XFree86 4.1.0 using the 'mga' driver and newer
(the current release
murad ali wrote:
Respected Sir
I M Murad Ali. I want to develope LFS system. But during BLFS , when I
get Installed XFree86.
With startx i get error messages. attached .
Modes1280*1024 1024*768
A copy of XFree86.0.log would be useful to see your errors, but I suspect
Zhang HongWei wrote:
XFree86 Version 4.0.3 / X Window System
Release Date: 16 March 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Strongly consider
[EMAIL PROTECTED] wrote:
Video Card: Diamond Multimedia Stealth 64 DRAM
Video Chipset: S3 Trio64
'XFree86 -configure' and 'XFree86 -xf86config .../XF86Config.new'
where ... is the path to where the new config file is placed.
___
XFree86
Jon Niehof wrote:
does somebody know a simple shell command to get
hardware caracteristics
(for exemple graphics hardware file) analogous to
winmsd under
Window NT?
I'm not familiar with winmsd so this may not be what
you're looking for, but lspci lists all the devices
found on the PCI bus.
Matt Benz wrote:
reboot to get out. Does anyone know how to get everything else to load
now that the graphics appear to be ok. When I looked in XFree86.0.log, I
dont get any errors, it just says xf86KbdEvents Resource temporaly
unavialable for the last line
Please send us the XFree86.0.log,
Raphael Peters wrote:
after installing the Nvidia-drivers NVIDIA_kernel-1.0-4191.src.rpm and
NVIDIA_GLX-1.0-4191.i386.rpm I couldn´t get back to my X11 desktop. I
got an error-message which I didn´t understand, ´cause I´m totally new
to Linux.
(II) NV: driver for NVIDIA chipsets: RIVA
Sandy Fort wrote:
Here is a copy of the error in the log file. I seem to have a lot of
problems with this. My brother tried to update his Mandrake from 9.2 to
9.2.1 and had the same problem. Since I have no graphical user
interface, what do I need to do to get X up and working correctly? I am
[EMAIL PROTECTED] wrote:
I have not start X after instalation.
My configuration:
- board K7VZA, RIVA TNT2 32MB.
(EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module!
(EE) NVIDIA(0): *** Aborting ***
I suggest that consider not using the nVidia binary drivers, and just use
Hugh Frater wrote:
I've got a thinkpad 760xl with a trident cyber chip. Looked all over the net
for info about this and 4.*.* version of XFree86... Can't get it to work
properly at all! It used to work fine with 3.3.6... Is the trident driver
buggy in the 4.*.* series? I've heard it is,
[EMAIL PROTECTED] wrote:
my laptop latitude d505 with a i855GME chipset is not working at all
I tried tzo distrubution SUSE 9 PRO or RedHat 9.0
Please send us your XFree86 config file (/etc/X11/XF86Config) and the log file
(/var/log/XFree86.0.log).
Dmitry Tsvigun wrote:
Help me, please!
I have problem with ASUS ATI Radeon 9200SE to start X.
See attachment.
XFree86 Version 4.3.0
Release Date: 27 February 2003
...
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x5964) rev 1, Mem @
0xf000/27, 0xdf00/16, I/O @ 0xd800/8, BIOS
Brian Nelson wrote:
which is why i'm sending the report this way). However, there was a:
Fatal server error: no screens found
it says that when reporting a server crash, i need to send the full
server output, not just the last message. it can be found at
/var/log/Xfree86.0.log, and i
[EMAIL PROTECTED] wrote:
Hi All,
I'm trying to install OpenSSL-0.9.7a-20 for RH 7.3 and I received the
following message:
error: failed dependencies: libc.so.6(GLIBC_2.3) is needed by
openssl-0.9.7a-20
Where can I download this library ?
This mailing list is about XFree86,
T. V. Vineeth _01007014_ wrote:
Could not init font path element unix/:7100, removing from list!
Fatal server error:
could not open default font 'fixed'
Your X server is configured to use a X Font Server (xfs), so it needs to be
running. As root, /sbin/service xfs start. You likely want to
Thomas Racine wrote:
hda:dma_timer_expiry:dma status==0x20
hda:timeout waiting for dma
hda:timeout waiting for dma
hda:status error:status=0x58
{DriveReady SeekComplete DataReq1uest}
hda:drive not ready for command
That appears to be an IDE hard drive (hda is the master on the 1st IDE
Luis Martín Díaz wrote:
Dear Mr.:
I've a PC with OS LINUX Mandrake 9.1 and I've a problem.
My PC start up ok but the X windows doesn't run.
It tell me:
Fatal server error
could not open default font 'fixed'
I send you the configurations files and the logs file too.
Run the
Philippe GUICHARD wrote:
My configuration :
Mainboard : Shuttle FX41 (with S3 ProSavage8 integrated)
Graphic card : Sapphire ATI Radeon 9600xt on the AGP port
Monitor : Hyundai ImageQuest Q17 : connected to the DVI port of the
Radeon AGP card)
(--) PCI:*(1:0:0) ATI Technologies Inc unknown
Ryan Underwood wrote:
On Tue, Feb 03, 2004 at 04:24:24AM -0500, Mike A. Harris wrote:
Matrox (82)
None of Matrox's specs are public, but some where once avail
under NDA. They no longer appear to be available from their
private developer website, unless I am looking in the wrong
place.
Feuri Adams wrote:
Hello, is tried to install Linux 8.1 on my Dell Inspiron 3500 Notebook. But
only the textmode works. In the graphictest of the graphic mode Linux stopps.
What can i do??? Please help me.
Could you please attempt to identify your video support (chipset) in your
notebook? This
[EMAIL PROTECTED] wrote:
Hello all,
I just started using gentoo linux. I am having trouble configuring the
X sever to use my Kensington mouse in a box usb wireless mouse.
This is the current setup I have in my XF86Config file:
IdentifierMouse1
Drivermouse
1 - 100 of 111 matches
Mail list logo
