Problem is evident in bottom of log...you either have no mouse or the
RH7 VM isn't able to produce one.
Try fiddling around with gpm or sumthin and see if you can get mouse access.
If that doesn't work, check your VMware settings and make sure that
the VM can see the mouse.
X is choking because
A couple things. First I think you're using the wrong driver.
There is an Sis driver for Sis chips, but you are using the VESA
driver which is unaccelerated. The VESA driver is limited to modes
that are listed in the VESA bios so it will be less flexible in
mode selection than other drivers.
I found the solution: my /tmp directory had two big
files and when I deleted them everything was OK
--- Mark Vojkovich [EMAIL PROTECTED] wrote:
There were no errors in the log file so I assume
that means
there's nothing wrong with the server. It sounds
more like a
problem with the
When I try to start machine in GUI mode (level 5), my
screen blinks few times and then crashes (then I see
prompt). If I try to run X from console I get blank
screen with mouse pointer. I also tried
redhat-config-xfree86 --reconfig but got: xconf.py:
Fatal IO error 2 (Connection rejec by peer) on
Sorry, message is Conncetion reset by peer
__
Do you Yahoo!?
New and Improved Yahoo! Mail - 100MB free storage!
http://promotions.yahoo.com/new_mail
___
XFree86 mailing list
[EMAIL PROTECTED]
]
Sent: 30 September 2004 08:27
To: [EMAIL PROTECTED]
Subject: Re: [XFree86] XFree86.0.log
When I try to start machine in GUI mode (level 5), my
screen blinks few times and then crashes (then I see
prompt). If I try to run X from console I get blank
screen with mouse pointer. I also tried
redhat
I reinstalled KDE from CD but nothing happened, so it
must be windows manager. What is its package name,
i.e. how to reinstall it? Or how to check is it
running?
thx very much
__
Do you Yahoo!?
Y! Messenger - Communicate in real time. Download
]
Subject: RE: [XFree86] XFree86.0.log
I reinstalled KDE from CD but nothing happened, so it
must be windows manager. What is its package name,
i.e. how to reinstall it? Or how to check is it
running?
thx very much
__
Do you Yahoo!?
Y! Messenger
There were no errors in the log file so I assume that means
there's nothing wrong with the server. It sounds more like a
problem with the window manager. Can you run XFree86 by itself?
Ie. just run XFree86. CtrlAltBackspace will quit it.
If you can do that, then the server itself is running
, September 29, 2004 1:13 PM
To: [EMAIL PROTECTED]
Subject: RE: [XFree86] XFree86.0.log
And what is your problem?
Your log file shows only one warning (about a sync rate setting being
higher
than the ratings of the monitor) and no errors.
I can only assume you sent this log because you thought we might
: Callisto Mupfunye [mailto:[EMAIL PROTECTED]
Sent: 29 September 2004 12:27
To: [EMAIL PROTECTED]
Subject: RE: [XFree86] XFree86.0.log
My problem is I can't get to F7 screen when I boot up my linux 7.3
server.
Regards,
Callisto Mupfunye
Technical Manager
Micromart Zimbabwe
Tel: 263-4-744643/587/628/523
There is no error in this logfile. It shows a properly working
X-server. What is the problem?
Mark.
On Wed, 29 Sep 2004, Zeljko Djuricic wrote:
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
Release Date: 27 February 2003
X Protocol Version 11, Revision
Could not init font path element unix/:7100, removing from list!
http://xfree86.linuxwiki.org/FAQErrorMessages#head-66113454d1ddc398ffb1e
7bce3fb588e7d5dff4d
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Lambros Kastrinakis
Sent: Friday, April 16, 2004
mascarasnake wrote:
Howdy All,
been trying to get X up on a BW G3 PowerMac (Yellow Dog Linux), but
have had little luck.
when I ran Xautoconf, I was given an XF86Config file that won't boot
into X.
My yaboot.conf file has a kernel arg of video=ofonly - don't know if
that affects X or not?
XFree86 Version 4.3.0 (Yellow Dog Linux release: 4.3.0-2.1e)
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.22-1asmp ppc [ELF]
Build Date: 29 August 2003
Build Host: skyfox.terraplex.com
Before reporting problems, check
Your fonts are broken:
Could not init font path element unix/:7100, removing from list!
Fatal server error:
could not open default font 'fixed'
Around Redhat 8, they stopped hard-coding font paths into the
XF86Config file and use xfs (X font server). Make sure it runs at
It appears to me that your mouse is misconfigured. You have
specified a serial mouse (really? you have a serial mouse?) yet
the serial port specified does not exist.
Mark.
On Fri, 23 Jan 2004, georgie kurien wrote:
-
Do you
On Sun, Sep 21, 2003 at 06:41:23PM +0200, Henk wrote:
Hopefully you can give me a response on this. The crash is at my first
install during first boot. The boot floppy made during install can't find
the linux RedHat 8 installation, so I can't make any changes to drivers or
you should make a
On Sun, 21 Sep 2003, Henk wrote:
Dear people,
Hopefully you can give me a response on this. The crash is at my first
install during first boot. The boot floppy made during install can't find
the linux RedHat 8 installation, so I can't make any changes to drivers or
whatever. I also have
Security on your system is too high to run the X-Window system.
Root isn't able to open /dev/mem, etc... I don't know much about
the BSDs so I don't know the exact fix, but this is a common problem
on those operating systems.
Mark.
On Fri, 27 Jun 2003, Bee Dutcher
20 matches
Mail list logo
