Re: [xmail] xmail bug: filter return codes wrong
Hi Edinilson, thanks for the info. I must have mixed up the SMTP filters with the other filters. The xmail documentation is unfortunately a little bit "wild", it better should be grouped into real sections, and numbered with section and paragraph numbers for easier reading and referencing. BTW, does anybody know anything about the whereabouts of the xmail author, Davide? I haven't seen any posting from him here for more than a year, I think. cu uenal Edinilson - ATINET wrote, On 05/24/2013 09:29 PM: I think that you are missing some points about filters. Inside mailroot you will find 2 files: filters.in.tab filters.out.tab for example, in filters.in.tab put something like: "*" *@YOUR-DOMAIN "0.0.0.0/0" "0.0.0.0/0" "YOUR-DOMAIN.tab" After that, you must create a file inside FILTERS dir called: YOUR-DOMAIN.tab So, inside FILTERS\YOUR-DOMAIN.TAB: you must point to your script, etc, etc README.TXT will help you with this. Edinilson -- ATINET Tel Voz: (0xx11) 4412-0876 http://www.atinet.com.br - Original Message - From: "U.Mutlu" To: "XMail Users Mailing List" Sent: Friday, May 24, 2013 10:18 AM Subject: Re: [xmail] xmail bug: filter return codes wrong There is only one flag value, 16, it's optional and means to stop processing any further filters in the chain, ie. an early-break signal. I mainly mean the SMPT message filters. Are the return values 4, 5, 6 (plus +16 to them) not used with this? As said, in my installation (original v1.27) only 0, 3, and 0+16=16, 3+16=19 is working. I yesterday tried a filterpgm in filters.out.tab, but it never was called, not even when mail is destined to a remote server. When does such a filter normally fire? And: there is in the MailRoot dir also an empty subdirector named "filters". What is it for? Thx Edinilson - ATINET wrote, On 05/24/2013 02:35 PM: Which kind of filter are you asking: MESSAGE FILTERS or SMTP MESSAGE FILTERS ? Remember that yout must ADD some flags values. There are some examples in readme.txt Here I have a filter that add 4 + 16 and returns this value. It´s working fine for years. Regards Edinilson -- ATINET Tel Voz: (0xx11) 4412-0876 http://www.atinet.com.br - Original Message ----- From: "U.Mutlu" To: Sent: Thursday, May 23, 2013 12:54 PM Subject: [xmail] xmail bug: filter return codes wrong The xmail documentation says: If this filters returns '4, 5 or 6' the message is rejected and is stopped in its travel. If the filter modifies the message it must return '7'. But, this info seems to be totally wrong, as only 0 and 3 is working (plus adding 16 to it for stopping processing other filters). What happened to xmail? Anybody know if modifying the mail within a filter is (still) possible in v1.27 ? ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
Re: [xmail] xmail bug: filter return codes wrong
I think that you are missing some points about filters. Inside mailroot you will find 2 files: filters.in.tab filters.out.tab for example, in filters.in.tab put something like: "*" *@YOUR-DOMAIN "0.0.0.0/0" "0.0.0.0/0" "YOUR-DOMAIN.tab" After that, you must create a file inside FILTERS dir called: YOUR-DOMAIN.tab So, inside FILTERS\YOUR-DOMAIN.TAB: you must point to your script, etc, etc README.TXT will help you with this. Edinilson -- ATINET Tel Voz: (0xx11) 4412-0876 http://www.atinet.com.br - Original Message - From: "U.Mutlu" To: "XMail Users Mailing List" Sent: Friday, May 24, 2013 10:18 AM Subject: Re: [xmail] xmail bug: filter return codes wrong There is only one flag value, 16, it's optional and means to stop processing any further filters in the chain, ie. an early-break signal. I mainly mean the SMPT message filters. Are the return values 4, 5, 6 (plus +16 to them) not used with this? As said, in my installation (original v1.27) only 0, 3, and 0+16=16, 3+16=19 is working. I yesterday tried a filterpgm in filters.out.tab, but it never was called, not even when mail is destined to a remote server. When does such a filter normally fire? And: there is in the MailRoot dir also an empty subdirector named "filters". What is it for? Thx Edinilson - ATINET wrote, On 05/24/2013 02:35 PM: Which kind of filter are you asking: MESSAGE FILTERS or SMTP MESSAGE FILTERS ? Remember that yout must ADD some flags values. There are some examples in readme.txt Here I have a filter that add 4 + 16 and returns this value. It´s working fine for years. Regards Edinilson -- ATINET Tel Voz: (0xx11) 4412-0876 http://www.atinet.com.br - Original Message - From: "U.Mutlu" To: Sent: Thursday, May 23, 2013 12:54 PM Subject: [xmail] xmail bug: filter return codes wrong The xmail documentation says: If this filters returns '4, 5 or 6' the message is rejected and is stopped in its travel. If the filter modifies the message it must return '7'. But, this info seems to be totally wrong, as only 0 and 3 is working (plus adding 16 to it for stopping processing other filters). What happened to xmail? Anybody know if modifying the mail within a filter is (still) possible in v1.27 ? ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
Re: [xmail] xmail bug: filter return codes wrong
There is only one flag value, 16, it's optional and means to stop processing any further filters in the chain, ie. an early-break signal. I mainly mean the SMPT message filters. Are the return values 4, 5, 6 (plus +16 to them) not used with this? As said, in my installation (original v1.27) only 0, 3, and 0+16=16, 3+16=19 is working. I yesterday tried a filterpgm in filters.out.tab, but it never was called, not even when mail is destined to a remote server. When does such a filter normally fire? And: there is in the MailRoot dir also an empty subdirector named "filters". What is it for? Thx Edinilson - ATINET wrote, On 05/24/2013 02:35 PM: Which kind of filter are you asking: MESSAGE FILTERS or SMTP MESSAGE FILTERS ? Remember that yout must ADD some flags values. There are some examples in readme.txt Here I have a filter that add 4 + 16 and returns this value. It´s working fine for years. Regards Edinilson -- ATINET Tel Voz: (0xx11) 4412-0876 http://www.atinet.com.br - Original Message - From: "U.Mutlu" To: Sent: Thursday, May 23, 2013 12:54 PM Subject: [xmail] xmail bug: filter return codes wrong The xmail documentation says: If this filters returns '4, 5 or 6' the message is rejected and is stopped in its travel. If the filter modifies the message it must return '7'. But, this info seems to be totally wrong, as only 0 and 3 is working (plus adding 16 to it for stopping processing other filters). What happened to xmail? Anybody know if modifying the mail within a filter is (still) possible in v1.27 ? ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
Re: [xmail] xmail bug: filter return codes wrong
Which kind of filter are you asking: MESSAGE FILTERS or SMTP MESSAGE FILTERS ? Remember that yout must ADD some flags values. There are some examples in readme.txt Here I have a filter that add 4 + 16 and returns this value. It´s working fine for years. Regards Edinilson -- ATINET Tel Voz: (0xx11) 4412-0876 http://www.atinet.com.br - Original Message - From: "U.Mutlu" To: Sent: Thursday, May 23, 2013 12:54 PM Subject: [xmail] xmail bug: filter return codes wrong The xmail documentation says: If this filters returns '4, 5 or 6' the message is rejected and is stopped in its travel. If the filter modifies the message it must return '7'. But, this info seems to be totally wrong, as only 0 and 3 is working (plus adding 16 to it for stopping processing other filters). What happened to xmail? Anybody know if modifying the mail within a filter is (still) possible in v1.27 ? ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
[xmail] xmail bug: filter return codes wrong
The xmail documentation says: If this filters returns '4, 5 or 6' the message is rejected and is stopped in its travel. If the filter modifies the message it must return '7'. But, this info seems to be totally wrong, as only 0 and 3 is working (plus adding 16 to it for stopping processing other filters). What happened to xmail? Anybody know if modifying the mail within a filter is (still) possible in v1.27 ? ___ xmail mailing list xmail@xmailserver.org http://xmailserver.org/mailman/listinfo/xmail
