I've been trying to bring up a machine that's driving an analog tv. The
machine is using the GMA 945 chipset. X sees the TV out, but the log
file says
TV-1 disconnected
and the TV shows "No Signal". I can get a signal all the way through
the boot sequence up until X starts.
Unfortunately t
Hi all,
Cutting and pasting from my blog entry[0] because I'm lazy:
> As ajax quite elegantly summed up[1], due to a series of catastrophic
> power failures at PSU, where fd.o is hosted, we were down for a good
> chunk of yesterday. Despite the machines having redundant power
> supplies, being con
Hi,
Aside from changing BIOS options, and enabling/disabling certain hardware
I am not sure. It looks like you have already done that. No USB etc in
your interrupts file...
Only other thing I would suggest is to see if there are any IRQ-specific
options in the module itself when load it, e.g
Justin,
No I did not use noapic initially.
I just tried and got the /proc/interrupts hereafter, which still gives me
qhal_host and i915 on the same line (IRQ 9)
Would your fix be to enable the CONFIG_PCI_MSI kernel option? I tried it
already and it made no difference. Unlike your 965 system, m
Do you boot with noapic?
On Wed, 30 Sep 2009, Justin Piszcz wrote:
Hi Hugo,
I use a DG965 board currently with built-in video and a 3ware card in the x16
slot:
$ cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
0: 3241 0 0 0 IO-APIC-ed
Hi Hugo,
I use a DG965 board currently with built-in video and a 3ware card in the
x16 slot:
$ cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
0: 3241 0 0 0 IO-APIC-edge timer
1: 2 0 0 0 IO-
Hi,
I have an Intel 945G-based system on which I installed a custom board
(qhal_host below) into the PCIe x16 slot.
I am running Linux 2.6.29.6, Xorg 1.6.0 and xf86-video-intel 2.7.0.
Is there a way to have the Integrated Graphics Controller
(i...@pci::00:02.0 below) being assigned to an I
I've just exported a new git repository for the xf4vnc project. It just
covers the xserver component at the moment.
It's available at
git clone git://xf4vnc.git.sourceforge.net/gitroot/xf4vnc/xserver
I've briefly tested it and it seems to work, but I've not done anything
extensive.
Let me k
Le mardi 29 septembre 2009 à 13:08 -0500, Xavier Toth a écrit :
> I'm displaying clients on a remote X server and if I power the X
> server box or pull the network cable some of the clients never
> terminate. Some clients (fbpanel and gnome-screensaver in particular)
> terminate and write "Fatal IO
