On Thu, Oct 8, 2009 at 6:48 PM, Csillag Kristof
csillag.kris...@united-consult.hu wrote:
Dear all,
Now that my individual monitors are operational, I would like to create
the following setup:
Monitor 1 Monitor 2 Monitor 3
(Connected to (Connected to
Section Device
Identifier FireMV 2200-1
BusID PCI:3:6:0
Screen 0
Driver radeon
EndSection
Section Device
Identifier FireMV 2200-2
BusID PCI:3:6:0
Screen 1
Driver
2009/10/9 Csillag Kristof csillag.kristof@united-consult.hu:
Section Device
Identifier FireMV 2200-1
BusID PCI:3:6:0
Screen 0
Driver radeon
EndSection
Section Device
Identifier FireMV 2200-2
BusID
Csillag Kristof wrote:
Alex Deucher wrote:
It's been years since I configured zaphod mode, but you need something
like this:
I have done something like this, and it segfaults.
See the attached config and log.
I realized that at one place of the config, I have written
On Fri, Oct 9, 2009 at 5:59 PM, Csillag Kristof
csillag.kris...@united-consult.hu wrote:
Csillag Kristof wrote:
Alex Deucher wrote:
It's been years since I configured zaphod mode, but you need something
like this:
I have done something like this, and it segfaults.
See the attached config
Alex Deucher wrote:
zaphod rarely gets tested so it tends to be broken periodically on
both the xserver and driver side. Make sure you are using
xf86-video-ati git master as there was a fix for zaphod recently:
Dear all,
Now that my individual monitors are operational, I would like to create
the following setup:
Monitor 1Monitor 2Monitor 3
(Connected to (Connected to (Connected to
FireMV 2200) RS690M) FireMV2200)
If I don't do anything
On Fri, 9 Oct 2009, Csillag Kristof wrote:
Dear all,
Now that my individual monitors are operational, I would like to create
the following setup:
Monitor 1Monitor 2Monitor 3
(Connected to (Connected to (Connected to
FireMV 2200) RS690M)
Dear Timothy,
Since the 3 monitors are connected to 2 different he GPUs, randr alone
can not solve my problem. Randr only works for monitors connected to a
single GPU: to combine different GPUs into one big desktop, one needs
Xinerama. (Or something like that.) So randr trickery is insufficient
