On Mon, 2007-06-18 at 16:54 +0100, Chris Rankin wrote:
--- Michel Dänzer [EMAIL PROTECTED] wrote:
Why? It shouldn't be hard for someone with the hardware to port the r300
bits.
...
I did the initial implementation for r300 and i915tex.
OK, so if you give me a few signposts
corresponds to t-pitch_reg, so you should probably just
skip this block if (t-image_override) to leave the value set in
r200SetTexOffset.
P.S. This is no longer about xf86-video-ati, so please consider moving
to the dri-devel or mesa3d-dev list.
--
Earthling Michel Dänzer | http
On Wed, 2007-06-20 at 16:25 +0200, Roberth Sjonøy wrote:
Is there any way to tweak the 2d and 3d performance?
There are some knobs, but it's hard to suggest something without knowing
the specific situations you feel could use tweaking. Please elaborate.
--
Earthling Michel Dänzer
to get it to show my movie is to switch to fullscreen.
Does anyone got same problem? I run KDE 3.5.6 with composite switched on
in kwin, DRI is on and running, EXA disabled so I use XAA.
Which version of xserver?
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre
mplayer
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg-driver-ati mailing list
xorg-driver-ati@lists.x.org
http://lists.x.org/mailman/listinfo
On Fri, 2007-06-22 at 21:56 +0200, Łukasz Mierzwa wrote:
Friday 22 of June 2007 18:05:55 napisałeś(-łaś):
On Thu, 2007-06-21 at 14:43 +0200, Łukasz Mierzwa wrote:
Thursday 21 of June 2007 09:09:27 Michel Dänzer napisał(a):
On Wed, 2007-06-20 at 22:52 +0200, Łukasz Mierzwa wrote
problem looks like
https://bugs.freedesktop.org/show_bug.cgi?id=9816 , can you try the
patch I attached there?
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
a chance this would (or at least could) be fixed with the
upcoming reorganization of the X server PCI code to use libpciaccess.
Please try the upstream xserver GIT branch pci-rework and report
upstream if the problem persists there.
--
Earthling Michel Dänzer | http
, is there any difference in the X log file with
or without the patch?
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg-driver-ati mailing
On Mon, 2007-07-02 at 16:06 +0200, Felix C. Stegerman wrote:
* Michel Dänzer [EMAIL PROTECTED] [2007-07-02 09:59]:
On Sat, 2007-06-30 at 06:03 +0200, Felix C. Stegerman wrote:
Your problem looks like
https://bugs.freedesktop.org/show_bug.cgi?id=9816 , can you try
the patch I
On Sun, 2007-07-15 at 18:21 +0200, Olivier wrote:
I'm using the ati Xorg driver. Changing to radeon had no effect.
Which version of xf86-video-ati? Does it happen with both XAA and EXA?
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast
this also happen without options
EnablePageFlip, DynamicClocks and backingstore?
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg-driver-ati
On Mon, 2007-07-16 at 09:31 +0200, Olivier wrote:
On 7/16/07, Michel Dänzer [EMAIL PROTECTED] wrote:
On Sun, 2007-07-15 at 18:21 +0200, Olivier wrote:
I'm using the ati Xorg driver. Changing to radeon had no
effect.
Which version of xf86
On Mon, 2007-07-16 at 18:29 +0200, Olivier wrote:
On 7/16/07, Michel Dänzer [EMAIL PROTECTED] wrote:
On Mon, 2007-07-16 at 09:31 +0200, Olivier wrote:
On 7/16/07, Michel Dänzer [EMAIL PROTECTED]
wrote:
On Sun, 2007-07-15 at 18:21 +0200, Olivier
On Tue, 2007-07-17 at 10:32 +0200, Olivier wrote:
On 7/17/07, Michel Dänzer [EMAIL PROTECTED] wrote:
On Mon, 2007-07-16 at 18:29 +0200, Olivier wrote:
and scrolling in Gmail works in a bizarre way.
Define 'bizarre'. Is it slow/jerky, or something else
On Sat, 2007-07-21 at 17:22 +0200, Łukasz Mierzwa wrote:
Monday 16 of July 2007 09:28:31 Michel Dänzer napisał(a):
On Sun, 2007-07-15 at 12:21 +0200, Łukasz Mierzwa wrote:
I'm running gentoo box on Acer 5024 laptop with ATI X700 mobility, I
emerged current git of xorg-server, mesa, libdrm
On Thu, 2007-07-19 at 19:31 -0600, John Wright wrote:
Package: xserver-xorg-video-ati
Version: 1:6.6.3-2
Severity: normal
I have a compaq nc6000 laptop, and the brightness buttons don't work if
I use x.org's ati driver.
Do they work with Option BIOSHotkeys?
--
Earthling Michel Dänzer
folder?.
It allows different per-user settings. Driconf also supports a system
wide configuration in /etc/drirc though. See
http://dri.freedesktop.org/wiki/ConfigurationInfrastructure .
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast
On Thu, 2007-08-23 at 10:51 -0400, Alex Deucher wrote:
On 8/23/07, Michel Dänzer [EMAIL PROTECTED] wrote:
for (i = 0; i xf86_config-num_output; i++) {
output = xf86_config-output[i];
radeon_output = output-driver_private;
if (output-crtc == crtc
the xorg.conf manpage about the
monitor section (not sure this is already documented in the 1.3.0
manpage though).
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
chroot. Just let me
know which packages you need and I can put them up on people.debian.org.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg
history of this bug report is available at
http://bugs.debian.org/348082
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg-driver-ati mailing
should disable it automatically in that case?
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg-driver-ati mailing list
xorg-driver-ati@lists.x.org
to/from a virtual console (or going
to sleep.)
That wasn't tearing but just a page flipping related bug I fixed for
6.7.19x.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
report this as a separate bug?
(WW) AIGLX: 3D driver claims to not support visual 0x23
https://bugs.freedesktop.org/show_bug.cgi?id=6624
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
This all looks good... Does the compiz output contain lines like
Couldn't bind redirected window 0x%x to texture
? Does using EXA instead of XAA make any difference?
Please post your full Xorg.0.log (for all configurations you try) and
xorg.conf files.
--
Earthling Michel Dänzer
Does the attached patch fix it?
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
diff --git a/src/radeon_video.c b/src/radeon_video.c
index 271f7fe..8560192 100644
--- a/src/radeon_video.c
+++ b/src
rotation of screen contents would be unaccelerated, making it
mostly useless.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg-driver-ati mailing
accordingly.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg-driver-ati mailing list
xorg-driver-ati@lists.x.org
http://lists.x.org/mailman
.. how do I get through authentication?
It should 'just work' when you're logged in. If it doesn't, try stopping
the display manager and running something like
xinit $(which xrandr)
from ssh.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast
of the lines are missing.
None of the above problems occur when rendering is software only.
And none of it is likely related to the X driver, reassigning.
Also, please don't combine several issues in one report.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre
'
PowerBook3,[45]:'powerbook-inttmds'
What about PowerBook3,3 (I forgot that didn't have DVI yet...)? I wonder
if that works with ibook or has a different setup for VGA and S-video.
Presumably the latter, as in contrast to iBooks they're separate
connectors.
--
Earthling Michel Dänzer
On Wed, 2007-10-17 at 17:47 +0200, Sjoerd Simons wrote:
On Wed, Oct 17, 2007 at 05:29:39PM +0200, Michel Dänzer wrote:
So basically, it looks like:
PowerBook5,*: 'powerbook-exttmds'
Or more specifically
PowerBook5,[1-5]: 'powerbook-exttmds-single'
PowerBook5,[78
AGP 4x TCL
Thanks, reassigning.
Adam, if you're using a compositing manager, see
https://bugs.freedesktop.org/show_bug.cgi?id=8732 . Otherwise, please
provide screenshots of the problem.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast
On Sun, 2007-11-25 at 14:03 +0100, Carsten Jaeger wrote:
What profile are you interested in?
From sysprof or oprofile etc., but only for EXA.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
there have been several reports where 1x works but not higher rates,
even if set up by the firmware. Maybe we could try sticking to the
current scheme for AGPv3 but going back to 1x by default otherwise?
Thoughts?
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre
as soon as you do a - IIRC -
cp radeon_drv.so /usr/lib/xorg/modules/drivers/
Don't!! ... :)
Indeed, you need something like cp --remove-destination, or you modify
the binary being executed.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software
On Mon, 2007-12-17 at 15:59 -0800, Alex Deucher wrote:
commit 44d07c4ccce9acb5bd21a17acb082e91f7225764
Author: Alex Deucher [EMAIL PROTECTED]
Date: Mon Dec 17 18:56:12 2007 -0500
RADEON: typo from last commit
BTW, that's what git-commit --amend is for. :)
--
Earthling Michel
) that made
things worse for you.
(==) RADEON(0): Using AGP 8x
Was the previous version (1:6.7.196-2?) using this rate as well? Does
Option AGPMode 4 help with the current version?
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast
using git-bisect. You can start
the process in a checked out Git tree with
git-bisect good 5022d006
git-bisect bad ce4fa1ce
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
- I'll have to learn how
before ;-) - to see if it works.
That would be great - generally, if you can't work around the problem
with Option AGPMode, isolating the problematic change with git-bisect
would be nice.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre
AGP defaults, or at least missing something
important.
Maybe we should just default to PCI mode. :}
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
the version changed, but sometimes just a reboot can trigger
this. It's always IRQ 16 or 17.
Is that ok ?
Should be, so long as it matches the line assigned to the graphics
card... but if it didn't, 3D apps would probably hit IRQ timeouts
immediately.
--
Earthling Michel Dänzer
around it by using
EXA instead of XAA, which seems to help.
What about XAA with Option RenderAccel off?
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
code seems to
understand how it's supposed to work in an endianness neutral manner.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg-driver-ati
code that was used
before RandR 1.2 could still work now; reinstating that would be a
relatively simple task for someone who is determined about fixing this
issue.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X
using monitor section Monitor0
add the following to your device section:
Option Monitor-LVDS Monitor0
Or just call the section LVDS instead of Monitor0.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI
On Wed, 2008-01-16 at 12:21 +, John Levon wrote:
On Thu, Jan 10, 2008 at 08:03:44AM +0100, Michel Dänzer wrote:
I have a Radeon 9200 SE and this problem:
https://bugzilla.redhat.com/show_bug.cgi?id=427331
I'm now using git master head (to get video out - which works great
a GLX compositing manager, support for
accelerated rotation with R300 generation cards was only just pushed to
the upstream Git repository. Also, AFAIK it's only working correctly
with EXA at this point.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software
On Thu, 2008-01-17 at 20:48 +0100, Xavier Bestel wrote:
Disabling colortiling makes it work.
Do I need to test something else ?
Can you try the new version in experimental,
1:6.7.198~git20080117.6bd510a2-1? That should now accelerate the
rotation.
--
Earthling Michel Dänzer
with the low-level initialization of
the card. There's also xf86-video-radeonhd, but I have no idea what the
status of that is on powerpc.
Also, if OpenFirmware puts up an image on the card on bootup, the
xf86-video-fbdev driver should work with the kernel OFfb driver.
--
Earthling Michel Dänzer
to be
conditionally defined in X11/Xmd.h. My solution? typedef unsigned long
CARD64; in radeon_crtc.c.
unsigned long is only 32 bits on 32 bit platforms, you'd need unsigned
long long.
Does CARD64 get defined if you #include X11/Xmd.h explicitly in
radeon_crtc.c?
--
Earthling Michel Dänzer
it.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg-driver-ati mailing list
xorg-driver-ati@lists.x.org
http://lists.x.org/mailman/listinfo
, if this option is good for compiz and kwin, why is it not the
default?
Because it disables some acceleration paths, which is usually bad
without a compositing manager.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X
.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg-driver-ati mailing list
xorg-driver-ati@lists.x.org
http://lists.x.org/mailman/listinfo/xorg-driver-ati
- they
both result in the monitor powering off.
Please attach the full log file from running without Option MacModel.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
is managing to lock up before it gets as far as
logging much.
If you're using xserver-xorg-video-ati 1:6.7.197-1, please try again
with a newer version, e.g. 1:6.7.198~git* from experimental or 1:6.8.0-1
from sid.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre
Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg-driver-ati mailing list
xorg-driver-ati@lists.x.org
http://lists.x.org/mailman/listinfo/xorg-driver-ati
On Tue, 2008-02-19 at 20:21 +0100, martin f krafft wrote:
also sprach Michel Dänzer [EMAIL PROTECTED] [2008.02.19.2007 +0100]:
Yes, using XAA fixes this. Thanks, Michel. Do you know of a good
piece of documentation to read to understand this?
The problem is that EXA is falling back
not, as the bug is about XVideo.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg-driver-ati mailing list
xorg-driver-ati@lists.x.org
http://lists.x.org
transfer rate in the BIOS setup or using Option
AGPMode in xorg.conf help?
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg-driver-ati mailing
On Mon, 2008-02-25 at 11:12 +0100, Xavier Bestel wrote:
On Mon, 2008-02-25 at 10:46 +0100, Michel Dänzer wrote:
On Mon, 2008-02-25 at 09:26 +0100, Xavier Bestel wrote:
On Sun, 2008-02-24 at 23:53 +0100, Brice Goglin wrote:
Xavier Bestel wrote:
Oh, and also I had to invert
afraid we can't continue until you try without them. In particular,
backing store is known to be broken in all released versions of X.Org.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
On Thu, 2008-02-28 at 14:59 +0530, JoJo jojo wrote:
On Thu, Feb 28, 2008 at 2:51 PM, Michel Dänzer
[EMAIL PROTECTED] wrote:
On Thu, 2008-02-28 at 14:20 +0530, JoJo jojo wrote:
PS: xorg.log is uploaded to pastebin
Xorg.log
also
for fixing it.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg-driver-ati mailing list
xorg-driver-ati@lists.x.org
http://lists.x.org/mailman
increase the likelihood of it
getting resolved.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg-driver-ati mailing list
xorg-driver-ati
of
the aborted server and/or a better description of what exactly happens
under what circumstances.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
On Wed, 2008-03-19 at 13:49 -0400, Hubert Chathi wrote:
On Wed, 19 Mar 2008 18:39:16 +0100 Michel Dänzer [EMAIL PROTECTED]
wrote:
On Wed, 2008-03-05 at 10:52 -0500, Hubert Chathi wrote:
It appears that the screen corruption issue that I mentioned in
http://bugs.debian.org/cgi
anything that explains
why the X server terminates. Is there anything in the X server stderr
output (possibly captured in the g/k/xdm log file), the compiz output or
the dmesg output, etc.?
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast
with _X_INTERNAL so they aren't
exported, or build with -Bsymbolic or similar.
Indeed, building with -Bsymbolic could be a good start at least. Each
driver's internal symbols such as these really shouldn't have any impact
on other parts of the server.
--
Earthling Michel Dänzer | http
-ati from experimental may or may not fit the bill.
If this advice doesn't help, please provide the full xorg.conf and
Xorg.0.log corresponding to it.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
On Fri, 2008-03-28 at 09:08 +0100, Michel Dänzer wrote:
On Thu, 2008-03-27 at 21:18 -0600, Thomas Vaughan wrote:
So I thought that I might just rotate my two monitors and make a virtual
desktop of 2400x1600. The problem that I encountered, however, was of
painfully slow performance
this to the list.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg-driver-ati mailing list
xorg-driver-ati@lists.x.org
http://lists.x.org/mailman/listinfo
need to port the corresponding code from the
xf86-video-ati radeon driver then.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg-driver-ati
On Thu, 2008-04-10 at 12:21 +0200, Luigi Campora wrote:
you mean port within MESA radeon module, without touching my DRI
kernel module. Correct?
Yes. Generally, the Mesa sample_server needs to initialize the DRM the
same way as the X driver.
--
Earthling Michel Dänzer
no such
problem with compiz. It would be interesting to know what kwin does
differently.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg-driver-ati
);
+/*ErrorF(table is %d %d\n, major, minor);*/
Maybe use xf86DrvMsgVerb() with a loglevel higher than the default,
possibly via macros? That would allow still getting this output via
starting the X server with -logverbose.
--
Earthling Michel Dänzer | http://tungstengraphics.com
to visibility of
the window, or if it's the same on both CRTCs, according to user
preference (maybe reuse the XV_CRTC attribute for this?)
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
On Wed, 2008-04-30 at 09:06 +0200, Michel Dänzer wrote:
* Only wait if the window isn't redirected (backing pixmap is the
screen pixmap)
Then again, this probably is about a redirected window... so really it
isn't the textured video rendering that needs to be synchronized
On Wed, 2008-04-30 at 14:39 -0400, Alex Deucher wrote:
On Wed, Apr 30, 2008 at 3:06 AM, Michel Dänzer
[EMAIL PROTECTED] wrote:
On Tue, 2008-04-29 at 16:52 -0400, Alex Deucher wrote:
On Tue, Apr 29, 2008 at 4:34 PM, Alex Rades [EMAIL PROTECTED] wrote:
Hi,
when playing videos
1.5 and the ati driver
snapshot in experimental.
I think you mean 6).
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg-driver-ati mailing
operations.
with opengl: framerate is good
It's all done by the CPU in this case.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg-driver
On Thu, 2008-05-22 at 11:18 +, RafałMużyło wrote:
Michel Dänzer [EMAIL PROTECTED] writes:
with cairo: system seems to freeze (I'm not talking about framerate,
server
itself gets unresponsive)
Does it recover after killing the application? Same problem without
Option
On Sat, 2008-05-31 at 09:07 +0200, [EMAIL PROTECTED] wrote:
On wtorek, 27 maja 2008, Michel Dänzer wrote:
On Mon, 2008-05-26 at 19:18 +0200, [EMAIL PROTECTED] wrote:
On poniedziałek, 26 maja 2008 you wrote:
The EXA offscreen area may be too small. Does Option
FBTexPercent 0
the kernel's aty128fb is rejecting the X server's
1024x768 modes. Have you tried putting an X mode definition (e.g.
obtained by fbset -x) of the console 1024x768 mode into the xorg.conf
monitor section?
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software
BusType
PCI?
but then I can't use hw scaling.
Why not?
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg-driver-ati mailing list
xorg-driver-ati
On Tue, 2008-06-10 at 21:45 +0400, Alex Tomas wrote:
Michel Dänzer wrote:
On Mon, 2008-06-09 at 10:58 +0400, Alex Tomas wrote:
I've got couple movies which lockup (almost) system in a second.
if I disable DRI the problem disappear,
What if you don't specify Option AGPMode instead
On Wed, 2008-06-11 at 20:54 +0400, Alex Tomas wrote:
Michel Dänzer wrote:
On Tue, 2008-06-10 at 21:45 +0400, Alex Tomas wrote:
Michel Dänzer wrote:
On Mon, 2008-06-09 at 10:58 +0400, Alex Tomas wrote:
I've got couple movies which lockup (almost) system in a second.
if I disable DRI
still be a problem with your generation card.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg-driver-ati mailing list
xorg-driver-ati
the
following:
R300CheckComposite: Component alpha not supported with source alpha
and source value blending.
This is probably related to sub-pixel anti-aliased text and should be
harmless, as EXA can still accelerate it in two passes.
--
Earthling Michel Dänzer
On Tue, 2008-06-17 at 07:18 -0700, Ray Van Dolson wrote:
On Tue, Jun 17, 2008 at 09:49:33AM +0200, Michel Dänzer wrote:
On Tue, 2008-06-17 at 00:14 -0700, Ray Van Dolson wrote:
I'm encountinger several situations where things seem to be dropping
back to software mode.
BTW
using is probably too old for EXA to
be usable. So just keep using XAA if it works better for you, it's still
the default after all.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
. Have you tried
or could you try the xserver Git master branch to see if the text
rendering and other optimizations there help?
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
://gismaster.liberix.cz/~karpi/noblogmedia/pics/sshots/ssht1.png
http://gismaster.liberix.cz/~karpi/noblogmedia/pics/sshots/ssht2.png
Probably a 3D driver issue, which version of Mesa?
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast
to start Xserver.
No, this was accidental and has been rectified.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
___
xorg-driver-ati mailing list
xorg
to avoid this by synchronizing the textured video rendering
to vertical blank, see
http://cgit.freedesktop.org/~agd5f/xf86-video-ati/log/?h=vsync_accel
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI
for
textured video rendering is rendered as two consecutive triangles
instead of as a single rectangle. It should be possible to fix this.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
image contains the even and odd field and thus is full
sized. It's the task of the CRT controller to read the right fields at
the right time.
BTW, have you tried disabling the RADEON_SCALER_ADAPTIVE_DEINT flag in
RADEONDisplayVideo()?
--
Earthling Michel Dänzer | http
fit in the same sentence if
you ask me...
Probably nothing beats a good TV when it comes to de-interlacing etc.,
so it makes sense to preserve the broadcast signal as much as possible.
I assume that's what 'high quality' refers to in this context.
--
Earthling Michel Dänzer
report are generic symptoms of a GPU
lockup, which can be caused by an infinite number of different things.
If the problem you're seeing only occurs after a cold boot, it does
sound like a (possibly temperature related) hardware issue.
--
Earthling Michel Dänzer | http
1 - 100 of 1140 matches
Mail list logo
