With those changes, I can switch VTs or resolutions within X again (yay!),
however, on my laptop, the Xv image is still offset too far out of the
window (at either 640x480 or 800x600), and the problem with videos
384pixels wide still happens (left side appears on right and vice versa).
It would
On Fri, Sep 21, 2001 at 02:17:09AM -0500, Chad Kitching wrote:
With those changes, I can switch VTs or resolutions within X again (yay!),
however, on my laptop, the Xv image is still offset too far out of the
window (at either 640x480 or 800x600), and the problem with videos
384pixels wide
OS [EMAIL PROTECTED] said:
Hello,
My understanding is this chipset (I have an Inspiron) was better
supported in XF 3.3.6 !! The 'reasoning' appears to be that this
chipset is now too old to bother with !! This goes for 3D
acceleration as well which seemed to be fully supported in 3.3.6
Hello,
I have a cyber 9397DVD chipset :
01:00.0 VGA compatible controller: Trident Microsystems Cyber 9397DVD (rev
f3) (prog-if 00 [VGA])
Subsystem: IBM: Unknown device 00ea
Flags: 66Mhz, medium devsel, IRQ 11
Memory at 7080 (32-bit, non-prefetchable) [size=8M]
Hi all,
does dri/drm from Xfree 4.1.0 is also avaiable for the 2.2.19 kernel
series, and if yes, where can I get the corrct kernel modules?
Thanks, Sven
___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
On Fri, Sep 21, 2001 at 11:49:57AM +0200, Fabrice Bellet wrote:
+#if 0
OUTW_3C4(SSetup);
OUTW_3C4(SKey);
OUTW_3C4(SPKey);
+#endif
more precisely, pb occurs because these registers can
be written when uninitialized (all values to zero).
--
fabrice
On Fri, Sep 21, 2001 at 12:05:42PM +0200, Sven Garbade wrote:
Hi all,
does dri/drm from Xfree 4.1.0 is also avaiable for the 2.2.19 kernel
series, and if yes, where can I get the corrct kernel modules?
No. 2.2.x support has been withdrawn.
Alan.
On Fri, Sep 21, 2001 at 12:20:37PM +0200, Fabrice Bellet wrote:
On Fri, Sep 21, 2001 at 11:49:57AM +0200, Fabrice Bellet wrote:
+#if 0
OUTW_3C4(SSetup);
OUTW_3C4(SKey);
OUTW_3C4(SPKey);
+#endif
more precisely, pb occurs because these registers can
be written when
Brian Lavender wrote:
I have a laptop with the ATI Rage Mobility Radeon-M on a Sony VAIO
PCG-GR170K. I did an lspci and this is the ID of the card. It has 8
Megs of RAM
#define PCI_CHIP_RADEON_VE 0x4C59
I got the latest XFree86 4.1.99 by doing a CVS checkout a couple weeks
ago.
On Fri, Sep 21, 2001 at 12:16:01PM +0100, Alan Hourihane wrote:
Can you check the archives. I'd sent a patch about this a few days ago.
Apply it, and let me know.
yes. it works with this patch.
--
fabrice
___
Xpert mailing list
[EMAIL PROTECTED]
Gustavo Carvalho Homem wrote:
One thing I can't find in the documentation. Are there advantages (or
disadvantages) of using XF86_FBDev over XFree86 4.1 with fbdev driver ? Any
other relevant comments ?
The big disadvantage is that XF86_FBDev is ooold and lacks a lot of features
like shadow
Just out of curiosity, did the older millennium I
(2064w) and millennium II's (2164w) have Xv hardware
on them as well, or did that not get added till later?
Thanks,
Alex
--
On Thu, 20 Sep 2001, Bob wrote:
I was under the impression that the Matrox G100 that
I'm
On Thu, Sep 20, 2001 at 11:16:29PM +0100, Gustavo Carvalho Homem wrote:
Hello all:
hi.
One thing I can't find in the documentation. Are there advantages (or
disadvantages) of using XF86_FBDev over XFree86 4.1 with fbdev driver ?
I only see an advantage for situations where Xserver is missing
Peter Surda wrote:
On Thu, Sep 20, 2001 at 11:16:29PM +0100, Gustavo Carvalho Homem wrote:
One thing I can't find in the documentation. Are there advantages (or
disadvantages) of using XF86_FBDev over XFree86 4.1 with fbdev driver ?
I only see an advantage for situations where Xserver
I don't know if this has anything to do with anything, but on the Dell Latitudes
we have (C600's? I think)--they have ATI Rage 128 Mobility cards--you can use
the 'Option Display Mirror' to do something like that. Of course, that doesn't
mean it'll work for you--as a matter of fact, I think
Hi dude.
On Fri, Sep 21, 2001 at 04:07:11PM +0200, Michel Dänzer wrote:
When did you last try the fbdev driver? It supports DGA as of 4.1.0 and I
wonder why it should be slower than the vesa driver as both use the same
shadow framebuffer.
I stopped using fbdev in January so may be I missed
Hi
Im running a Toshiba Tecra 8200 laptop with a trident cyberblade xp gfx card. The card works in Xfree but lacks xv and dga. I saw that there were some unofficial patches and maybe some of them fixed the problem. Could anyone put them in cvs or tell me how to install them. Im running debian
Peter Surda wrote:
On Fri, Sep 21, 2001 at 04:07:11PM +0200, Michel Dänzer wrote:
When did you last try the fbdev driver? It supports DGA as of 4.1.0 and I
wonder why it should be slower than the vesa driver as both use the same
shadow framebuffer.
I stopped using fbdev in January so may
Peter Surda wrote:
On Fri, Sep 21, 2001 at 05:08:29PM +0200, Michel Dänzer wrote:
Yes, PCI GART is still disabled in source for the Radeon AFAIK.
Hmm I thought pci gart isn't implemented yet for radeon?
The code has been there for as long as for the Rage128, it's just still
disabled on
Hi Peter:
On Thu, Sep 20, 2001 at 11:16:29PM +0100, Gustavo Carvalho Homem wrote:
Hello all:
hi.
One thing I can't find in the documentation. Are there advantages (or
disadvantages) of using XF86_FBDev over XFree86 4.1 with fbdev driver ?
I only see an advantage for situations where
On Fri, 21 Sep 2001, Alex Deucher wrote:
Just out of curiosity, did the older millennium I
(2064w) and millennium II's (2164w) have Xv hardware
on them as well, or did that not get added till later?
Only G200 and newer.
Mark.
On Fri, 21 Sep 2001, Alex Deucher wrote:
I actually just got a response from matrox, and they
said that all cards from Millennium I onward have
hardware colorspace conversion, but only the G200 and
up have hardware scaling.
They didn't have overlay hardware before the G200.
And it
Hello,
I have written an application which uses the RECORD extension in
the Xtst library. I have noticed that the application while appearing
to function correctly has a severe stability problem. When recording is
enabled the X session is closed whenever a window is closed or
Hey there... ]) powered by Linux 2.4.8 ([
I have run into a problem and I hope some of you guys can help me out. :)
Thanks in advance for your help and time!
Is it possible to do some vsync synchronization with the XVideo (or any other)
extension? I
On Fri, Sep 21, 2001 at 10:12:54PM +0200, Matthias Dahl wrote:
Hey there... ]) powered by Linux 2.4.8 ([
hi
I have run into a problem and I hope some of you guys can help me out. :)
Thanks in advance for your help and time!
np
Is it possible to do
I have an IBM Thinkpad 760ED with a trident TGUI chipset (not sure
which one I can't get a definative answer.)
Under 3.3.6 Everything worked great. Under 4.1.0 I only get to results
under the vga driver I get a 320x200 screen that has been magnified by
about 2x, or under the trident driver all I
Hello,
I've tried the current CVS version to test the wheel emulation mode that
Henry T. So implemented and I've found a problem.
I'm using the fourth button as wheel emulation button, but then, when the
it's going to generate a fourth button press/release events (wheel up),
it chooses not
Title: RE: [Xpert]Having trouble getting Xfree86 working on my laptop.
It should be the same as my current laptop (IBM 760XD), if so, then you need to use the SVGA server @ 1024x768x16bpp with the monitor as Generic LCD panel 1024x768 (personally, I specify one of the IBM TFT Panels
Hello,
Is the Internet solution 'Xweb' browser plugin implemented in XFree86 -
if not, why not?
http://www.opengroup.org/press/31mar98.htm
http://www.google.com/search?q=cache:QMmnZSzLY6Y:www.broadwayinfo.com/+%22broadwayinfo.%2Bcom%22hl=en
Hello Michel:
Thank you very much for your answeer. So from what I read from you I
would say that for an installer it would be better to use the old
XF86_FBDev since one does not need in this case to use the new fancy
features and from your words we get the impressions that the old one could
30 matches
Mail list logo
