OK, finally built the u-boot-fw-utils and run it on iMX6ULL:
# fw_printenv -v
Compiled with U-Boot 2019.07-dirty
But it could not run:
# fw_printenv
Cannot read bad block mark: Invalid argument
Here is the configure file:
# cat /etc/fw_env.config
# NAND
/dev/mtd1 0x40
On 4/30/20, Nicolas Jeker wrote:
> on Zeus it's very likely _not_ libubootenv that you need, you should
> try to install u-boot-fw-utils. As Yann wrote, the tools are in
> libubootenv since Dunfell, which is newer than Zeus.
Thanks Nicolas, I have following error, what I could be missing here?
On Thu, 2020-04-30 at 16:34 +1000, JH wrote:
> Hi Yann,
>
> Thanks for the tips, I have run to add libubootenv, but got so many
> errors, I can build a good Yocto image before adding libubootenv,
> what
> was it going on? Does that mean I need to add all kernel modules and
> to rebuild kernel conf
Hi Yann,
Thanks for the tips, I have run to add libubootenv, but got so many
errors, I can build a good Yocto image before adding libubootenv, what
was it going on? Does that mean I need to add all kernel modules and
to rebuild kernel configure?
kernel-image
kernel-base
kernel-image-zimage
kernel
Thanks Yann, I am running Zeus, I guss it should be libubootenv-bin,
going to try it now.
Thank you so much and greatly appreciate your help.
- yh
On 4/28/20, Yann Dirson wrote:
> Hello,
>
> It depends on the yocto version. Since dunfell they are in
> libubootenv-bin, before that they were in
Hello,
It depends on the yocto version. Since dunfell they are in
libubootenv-bin, before that they were in u-boot-fw-utils.
Le mar. 28 avr. 2020 à 10:04, JH a écrit :
> Hi,
>
> I was told you can run u-boot command inside of Linux, which recipe
> can be used in Yocto for install that package?
Hi,
I was told you can run u-boot command inside of Linux, which recipe
can be used in Yocto for install that package?
Thank you.
Kind regards,
- jh
--
"A man can fail many times, but he isn't a failure until he begins to
blame somebody else."
-- John Burroughs
-=-=-=-=-=-=-=-=-=-=-=-
Links: