image.
So the problem is that the `kernel-modules` doesn't add all the module
packages in one package and it's empty. Therefore, when it's installed
it installs nothing.
Regards,
Dimitris
Bruce Ashfield schrieb am Mi., 6. Nov. 2019,
17:20:
> On Wed, Nov 6, 2019 at 11:06 AM Dimitris Tassopou
Hi all. I have a weird issue with the kernel modules not being installed in
the image and also not packaged.
I see the packages for individual "kernel-module-*.ipk" modules but the
"kernel-modules_*.ipk" is always
empty.
I'm also able to see the "modules-${MACHINE}.tgz" in DEPLOYDIR which has
all
Hi JH,
I believe the most important feature of the wic images is to be able to
flash your SD card faster than just extract and dd the full image on the
SD card. For that reason you can use the bmap-tool which already supports
the gz compression (as also .bz2). To do that you also need the bmap
t; On Wed, May 29, 2019 at 9:03 AM Dimitris Tassopoulos
> wrote:
> >
> > Hi Marek,
> >
> > that's correct. I have a branch though which I've started to experiment
> and add support for Mali. I didn't finished because I've tried to do this
> by myself from the scra
ards,
> > Dimitris
> >
> >
> Marek
> >
> > On Tue, May 28, 2019 at 12:56 PM Enrico
> wrote:
> >>
> >> On Tue, May 28, 2019 at 12:06 PM Dimitris Tassopoulos <
> dimt...@gmail.com> wrote:
> >> >
> >> > >
> &g
On Tue, May 28, 2019 at 12:56 PM Enrico
wrote:
> On Tue, May 28, 2019 at 12:06 PM Dimitris Tassopoulos
> wrote:
> >
> > >
> > > I was thinking about this also, too. The only reason is that in
> meta-sunxi they do a great job and they keep their layer clean, wh
that explains that was not
a decision to divide things or create more hassle for the same chips.
Regards,
Dimitris
Belisko Marek schrieb am Di., 28. Mai 2019, 11:49:
> Hi Dimitris,
>
> On Tue, May 28, 2019 at 11:01 AM Dimitris Tassopoulos
> wrote:
> >
> > Hi Belisko,
> >
Hi Belisko,
you can also have a look in to this layer:
http://layers.openembedded.org/layerindex/branch/master/layer/meta-allwinner-hx/
It's for allwinner H2,H3 and H5 boards that already have support on Armbian.
Pretty much is just a Yocto layer with all the patches and BSP support from
Armbian.
The same also happens with the deb packager.
But it works with rpm. For deb '_' is not allowed character, so
I guess ithe same for ipkg.
You need to either change the 'LOCALVERSION' of the kernel
or use rpm.
Dimitris
On Thu, Apr 4, 2019 at 11:07 AM Fernando AE
wrote:
> Hello all,
>
> I
Hi Serj,
I'm using the -r / -R options in bitbake in order to customize the image
via global
variables and be able to build different configurations for the same
machine and
distro. You you use the same option to create e.g. different versions. Have
a look
in the documentation
is formed in
> the output of the command.
>
> Alex
>
> On Fri, 29 Mar 2019 at 10:37, Alexander Kanavin
> wrote:
> >
> > On Fri, 29 Mar 2019 at 09:51, Dimitris Tassopoulos
> wrote:
> >
> > > To do that, add this to your build/conf/local.conf file
> > &g
Hi Mikko, thanks for pointing out the buildhistory.
I need to have a look at it also as I haven't used it yet.
Also, it's very nice to see it documented so well.
Thanks!
On Fri, Mar 29, 2019 at 9:59 AM wrote:
> On Fri, Mar 29, 2019 at 09:50:20AM +0100, Dimitris Tassopoulos wrote:
> &g
Hi all,
I was thinking that the mail list shouldn't be only for problems and
questions and that from time to time, it would be nice to see some guides,
tutorials or success stories from people that follow the list.
Anyway, a few days ago someone had an issue with one of the BSPs I'm
maintaining
Hi Gus, very interesting stuff you have there.
Thanks for the heads up.
Dimitris
On Mon, Mar 25, 2019 at 4:10 PM Angus Lees wrote:
> Oh I lie, some of my Android-SDK stuff survives:
> https://github.com/anguslees/openembedded-android/wiki
>
> Here's a relevant scummvm forum post to put it in
Fr., 22. März 2019, 22:45:
> On 3/22/19 5:13 PM, Dimitris Tassopoulos wrote:
>
> Hi Bob,
>
> for low cost BSPs you can have a look at some allwinner boards from
> FriendlyElec and OrangePi.
>
>
> That's excellent. Thank you. Do any of these boards have accessible JTAG
Hi Bob,
for low cost BSPs you can have a look at some allwinner boards from
FriendlyElec and OrangePi.
I've created meta layer to support most of the H2, H3 and H5 arm cores here:
https://layers.openembedded.org/layerindex/branch/master/layer/meta-allwinner-hx/
So you can grab any of those
>>
>> >> On Wed, Mar 6, 2019 at 8:15 AM Scott Rifenbark
>> wrote:
>> >> >
>> >> > Dimitris,
>> >> >
>> >> > Good find... I will see about documenting this.
>> >> >
>> >&g
Hi all,
this is not a request for help.
Today, I've found a very nice option which is not documented
which is the INHIBIT_SYSROOT_STRIP and is used in the sysroot_strip()
inside the poky/meta/classes/staging.bbclass.
I had an issue with a recipe that had a few binaries that I wanted to add
to
AFAIK, you can't have dynamic variables in the local.conf that you
can control from bitbake.
If you want to dynamically pass a variable to bitbake, you need to
use the `-e` option and pass an environment file with you dynamic
variables in there. Or use a custom script that calls bitbake and with
Hi Alex,
If you don't want the extended partitions you need to create a gpt
partition, you can do this by adding this to your wks file.
bootloader --ptable gpt
Regards,
Dimitris
On Tue, 13 Nov 2018, 20:23 Alex Kiernan On Tue, Nov 13, 2018 at 7:13 PM Donal Morrissey
> wrote:
> >
> > Hi
; On Mon, Nov 12, 2018 at 5:51 PM Dimitris Tassopoulos
> wrote:
>
>> Yeah, I think everybody is pretty busy. This project is huge and there
>> aren't many contributors.
>>
>> Anyway, in case you use wks files, then you can create a file named
>> *test.wks.in
&g
ning about this overlapping and suggest the use of
`--rootfs-dir` and `--exclude-path`.
I'll continue from this point now.
Thanks again,
Dimitris
On Wed, Nov 7, 2018 at 1:58 AM Mittal, Anuj wrote:
> Hi Dimitris
>
> On Tue, 2018-11-06 at 16:12 +0100, Dimitris Tassopoulos wrote:
> >
> >
Hi all.
I'm working on bug #8729 and I'm trying to implement the multi-boot
functionality for grub.
I've partially done and I've created a virtual/grub-bootconf that can be
used like that:
PREFERRED_RPROVIDER_virtual/grub-bootconf = "grub-multibootconf"
That's working ok and installs the proper
I've forgot to format...
>From 89711eb7143bd832fb150442b9ca63fdf80d53fb Mon Sep 17 00:00:00 2001
From: Dimitris Tassopoulos
Date: Mon, 5 Nov 2018 23:18:25 +0100
Subject: [PATCH] Added description of the ovmf option in runqemu
The current documentation doesn't have any info for the ovmf opt
Hi all, since I don't have permission to push, I'm sending the patch by
email.
This is the commit message and patch
Added description of the ovmf option in runqemu
The current documentation doesn't have any info for the ovmf option.
In case you build a QEMU image with the grub-efi bootloader,
Hi all,
this is a proposal for a feature, I hope it's the right way to do it.
It would be nice if there would be a standard way to document recipes and
then be able to read this documentation from the command line. Something
like the man pages.
For example, there could be either a variable in
Another thing you could do is to work with git branches and have a bbappend
file to set the branch and commit hash. You will still need to push the
changes to the remote git repo, but you don't have to merge to your master
branch.
Then if you don't like just drop the branch or cherry-pick only the
Hi all.
Usually I have a small x86_64 board that I test images. But for the first
time I've tried to use yocto to do some development on grub. I've used
qemu to do grub development before and I know that this works fine. I
just use grub-mkrescue to create images with my grub script and then
boot.
Cool, thanks again Ross.
On Mon, Oct 29, 2018 at 4:01 PM Burton, Ross wrote:
> Yes, it needs to be backported.
>
> Ross
> On Mon, 29 Oct 2018 at 14:58, Dimitris Tassopoulos
> wrote:
> >
> > Hi Ross,
> >
> > thanks for the reply. Shouldn't these kind of
Hi all,
it seems that the libxcrypt recipe in poky is failing because the git repo
doesn't have a master branch anymore. The default branch has changed
to `develop` and the recipe can't fetch the repo when I'm building the SDK
for my image.
A temporary solution is to override the URL with a
I've already send this to that list a few days ago, but since I didn't got
any reply there I've also asked here in case that someone else shares the
same experience.
Dimitris
On Wed, 10 Oct 2018, 21:48 Bruce Ashfield,
wrote:
> On 2018-10-10 2:18 PM, Dimitris Tassopoulos wrote:
> &g
Hi all!
I've tried to build the latest preempt-rt kernel from the
`v4.14/standard/preempt-rt/base`
and it fails to build. These are the hashes I've used:
```
LINUX_VERSION = "4.14.71"
SRCREV_machine = "c37a14708f5b618602f84f83f902346e055824c3"
SRCREV_meta =
Sometimes, I also got some weird errors like that when copying and pasting
projects (or meta layers) from one machine to other. That's because the
flags and some file stats are not copied.
On Thu, 13 Sep 2018, 18:57 Alexander Kanavin,
wrote:
> It seems as though the build system is unable to
33 matches
Mail list logo