Re: [yocto] dd to nand flash chip?
partition : Disk /dev/mmcblk1boot1: 4 MiB, 4194304 bytes, 8192 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk /dev/mmcblk1boot0: 4 MiB, 4194304 bytes, 8192 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes I tried to fdisk it but can not, any other option for deleting it ? Thanks On 18/08/17 16:58, Ed Bartosh wrote: On Fri, Aug 18, 2017 at 11:40:58AM +0800, Riko wrote: Here's the boot messages : === VFS: PARTUUID= is invalid. Expected PARTUUID=[/PARTNROFF=%d] Disabling rootwait; root= is invalid. VFS: Cannot open root device "PARTUUID=" or unknown-block(0,0): error -6 Looks like you have empty PARTUUID in the kernel command line. Which wks file do you use for this image? Which layers? Can you show your bootloader config? Please append a correct "root=" boot option; here are the available partitions: 01004096 ram0 (driver?) 01014096 ram1 (driver?) 01024096 ram2 (driver?) 01034096 ram3 (driver?) 01044096 ram4 (driver?) 01054096 ram5 (driver?) 01064096 ram6 (driver?) 01074096 ram7 (driver?) 01084096 ram8 (driver?) 01094096 ram9 (driver?) 010a4096 ram10 (driver?) 010b4096 ram11 (driver?) 010c4096 ram12 (driver?) 010d4096 ram13 (driver?) 010e4096 ram14 (driver?) 010f4096 ram15 (driver?) b300 3735552 mmcblk1 driver: mmcblk b301 16384 mmcblk1p1 2848be0f-01 b302 756704 mmcblk1p2 2848be0f-02 b3104096 mmcblk1boot1 (driver?) b3084096 mmcblk1boot0 (driver?) VFS: Unable to mount root fs on unknown-block(0,0) User configuration error - no valid root filesystem found Kernel panic - not syncing: Invalid configuration from end user prevents conting CPU: 0 PID: 1 Comm: swapper Not tainted 4.8.12-yocto-standard #3 Hardware name: Generic AM33XX (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [] (show_stack) from [] (dump_stack+0x20/0x28) [] (dump_stack) from [] (panic+0xc0/0x22c) [] (panic) from [] (mount_block_root+0x19c/0x274) [] (mount_block_root) from [] (mount_root+0xd0/0x124) [] (mount_root) from [] (prepare_namespace+0x180/0x1c0) [] (prepare_namespace) from [] (kernel_init_freeable+0x220/) [] (kernel_init_freeable) from [] (kernel_init+0x18/0x11c) [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) ---[ end Kernel panic - not syncing: Invalid configuration from end user preveng = How to fix it ? thanks On 17/08/17 22:16, Leonardo Sandoval wrote: On Thu, 2017-08-17 at 18:37 +0800, Riko Ho wrote: Dear Yocto Team Members， I tried to dd *.wic to nand flash but always got kernel panic, it can not find rootfs when I dd the same file to sd card, it worked. >from the bootloader command prompt, you may need to change the root kernel parameter and point to the device where the filesystem resides. I copy only *.wic file to usb drive n dd it. Do I need the whole directory of images for dd? or I need hddimg? Regards, Riko -- /* Sent By Ubuntu 16.04 LTS Kernel 4.4.0-92-generic Regards, Riko H */ -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- /* Sent By Ubuntu 16.04 LTS Kernel 4.4.0-92-generic Regards, Riko H */ -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] dd to nand flash chip?
Is it related with linux-yocto kernel config ? Please see attachment, thanks On 18/08/17 16:58, Ed Bartosh wrote: On Fri, Aug 18, 2017 at 11:40:58AM +0800, Riko wrote: Here's the boot messages : === VFS: PARTUUID= is invalid. Expected PARTUUID=[/PARTNROFF=%d] Disabling rootwait; root= is invalid. VFS: Cannot open root device "PARTUUID=" or unknown-block(0,0): error -6 Looks like you have empty PARTUUID in the kernel command line. Which wks file do you use for this image? Which layers? Can you show your bootloader config? Please append a correct "root=" boot option; here are the available partitions: 01004096 ram0 (driver?) 01014096 ram1 (driver?) 01024096 ram2 (driver?) 01034096 ram3 (driver?) 01044096 ram4 (driver?) 01054096 ram5 (driver?) 01064096 ram6 (driver?) 01074096 ram7 (driver?) 01084096 ram8 (driver?) 01094096 ram9 (driver?) 010a4096 ram10 (driver?) 010b4096 ram11 (driver?) 010c4096 ram12 (driver?) 010d4096 ram13 (driver?) 010e4096 ram14 (driver?) 010f4096 ram15 (driver?) b300 3735552 mmcblk1 driver: mmcblk b301 16384 mmcblk1p1 2848be0f-01 b302 756704 mmcblk1p2 2848be0f-02 b3104096 mmcblk1boot1 (driver?) b3084096 mmcblk1boot0 (driver?) VFS: Unable to mount root fs on unknown-block(0,0) User configuration error - no valid root filesystem found Kernel panic - not syncing: Invalid configuration from end user prevents conting CPU: 0 PID: 1 Comm: swapper Not tainted 4.8.12-yocto-standard #3 Hardware name: Generic AM33XX (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [] (show_stack) from [] (dump_stack+0x20/0x28) [] (dump_stack) from [] (panic+0xc0/0x22c) [] (panic) from [] (mount_block_root+0x19c/0x274) [] (mount_block_root) from [] (mount_root+0xd0/0x124) [] (mount_root) from [] (prepare_namespace+0x180/0x1c0) [] (prepare_namespace) from [] (kernel_init_freeable+0x220/) [] (kernel_init_freeable) from [] (kernel_init+0x18/0x11c) [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) ---[ end Kernel panic - not syncing: Invalid configuration from end user preveng = How to fix it ? thanks On 17/08/17 22:16, Leonardo Sandoval wrote: On Thu, 2017-08-17 at 18:37 +0800, Riko Ho wrote: Dear Yocto Team Members， I tried to dd *.wic to nand flash but always got kernel panic, it can not find rootfs when I dd the same file to sd card, it worked. >from the bootloader command prompt, you may need to change the root kernel parameter and point to the device where the filesystem resides. I copy only *.wic file to usb drive n dd it. Do I need the whole directory of images for dd? or I need hddimg? Regards, Riko -- /* Sent By Ubuntu 16.04 LTS Kernel 4.4.0-92-generic Regards, Riko H */ -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- /* Sent By Ubuntu 16.04 LTS Kernel 4.4.0-92-generic Regards, Riko H */ -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] dd to nand flash chip?
Is it related with : https://stackoverflow.com/questions/43211384/how-to-get-to-menuconfig-for-u-boot-in-yocto-environment ? Thanks On 18/08/17 16:58, Ed Bartosh wrote: On Fri, Aug 18, 2017 at 11:40:58AM +0800, Riko wrote: Here's the boot messages : === VFS: PARTUUID= is invalid. Expected PARTUUID=[/PARTNROFF=%d] Disabling rootwait; root= is invalid. VFS: Cannot open root device "PARTUUID=" or unknown-block(0,0): error -6 Looks like you have empty PARTUUID in the kernel command line. Which wks file do you use for this image? Which layers? Can you show your bootloader config? Please append a correct "root=" boot option; here are the available partitions: 01004096 ram0 (driver?) 01014096 ram1 (driver?) 01024096 ram2 (driver?) 01034096 ram3 (driver?) 01044096 ram4 (driver?) 01054096 ram5 (driver?) 01064096 ram6 (driver?) 01074096 ram7 (driver?) 01084096 ram8 (driver?) 01094096 ram9 (driver?) 010a4096 ram10 (driver?) 010b4096 ram11 (driver?) 010c4096 ram12 (driver?) 010d4096 ram13 (driver?) 010e4096 ram14 (driver?) 010f4096 ram15 (driver?) b300 3735552 mmcblk1 driver: mmcblk b301 16384 mmcblk1p1 2848be0f-01 b302 756704 mmcblk1p2 2848be0f-02 b3104096 mmcblk1boot1 (driver?) b3084096 mmcblk1boot0 (driver?) VFS: Unable to mount root fs on unknown-block(0,0) User configuration error - no valid root filesystem found Kernel panic - not syncing: Invalid configuration from end user prevents conting CPU: 0 PID: 1 Comm: swapper Not tainted 4.8.12-yocto-standard #3 Hardware name: Generic AM33XX (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [] (show_stack) from [] (dump_stack+0x20/0x28) [] (dump_stack) from [] (panic+0xc0/0x22c) [] (panic) from [] (mount_block_root+0x19c/0x274) [] (mount_block_root) from [] (mount_root+0xd0/0x124) [] (mount_root) from [] (prepare_namespace+0x180/0x1c0) [] (prepare_namespace) from [] (kernel_init_freeable+0x220/) [] (kernel_init_freeable) from [] (kernel_init+0x18/0x11c) [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) ---[ end Kernel panic - not syncing: Invalid configuration from end user preveng = How to fix it ? thanks On 17/08/17 22:16, Leonardo Sandoval wrote: On Thu, 2017-08-17 at 18:37 +0800, Riko Ho wrote: Dear Yocto Team Members， I tried to dd *.wic to nand flash but always got kernel panic, it can not find rootfs when I dd the same file to sd card, it worked. >from the bootloader command prompt, you may need to change the root kernel parameter and point to the device where the filesystem resides. I copy only *.wic file to usb drive n dd it. Do I need the whole directory of images for dd? or I need hddimg? Regards, Riko -- /* Sent By Ubuntu 16.04 LTS Kernel 4.4.0-92-generic Regards, Riko H */ -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- /* Sent By Ubuntu 16.04 LTS Kernel 4.4.0-92-generic Regards, Riko H */ -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] dd to nand flash chip?
I'm confused, what is wks ? what layers do you want to know? I was bitbaking core image minimal xfce. How can I see my bootloader config? Thanks and regards, Riko On Aug 18, 2017 5:22 PM, "Ed Bartosh" <ed.bart...@linux.intel.com> wrote: > On Fri, Aug 18, 2017 at 11:40:58AM +0800, Riko wrote: > > Here's the boot messages : > > > > === > > > > VFS: PARTUUID= is invalid. > > Expected PARTUUID=[/PARTNROFF=%d] > > Disabling rootwait; root= is invalid. > > VFS: Cannot open root device "PARTUUID=" or unknown-block(0,0): error -6 > > Looks like you have empty PARTUUID in the kernel command line. Which wks > file do you use for this image? Which layers? Can you show your > bootloader config? > > > Please append a correct "root=" boot option; here are the available > > partitions: > > 01004096 ram0 (driver?) > > 01014096 ram1 (driver?) > > 01024096 ram2 (driver?) > > 01034096 ram3 (driver?) > > 01044096 ram4 (driver?) > > 01054096 ram5 (driver?) > > 01064096 ram6 (driver?) > > 01074096 ram7 (driver?) > > 01084096 ram8 (driver?) > > 01094096 ram9 (driver?) > > 010a4096 ram10 (driver?) > > 010b4096 ram11 (driver?) > > 010c4096 ram12 (driver?) > > 010d4096 ram13 (driver?) > > 010e4096 ram14 (driver?) > > 010f4096 ram15 (driver?) > > b300 3735552 mmcblk1 driver: mmcblk > > b301 16384 mmcblk1p1 2848be0f-01 > > b302 756704 mmcblk1p2 2848be0f-02 > > b3104096 mmcblk1boot1 (driver?) > > b3084096 mmcblk1boot0 (driver?) > > VFS: Unable to mount root fs on unknown-block(0,0) > > User configuration error - no valid root filesystem found > > Kernel panic - not syncing: Invalid configuration from end user > > prevents conting > > CPU: 0 PID: 1 Comm: swapper Not tainted 4.8.12-yocto-standard #3 > > Hardware name: Generic AM33XX (Flattened Device Tree) > > [] (unwind_backtrace) from [] (show_stack+0x20/0x24) > > [] (show_stack) from [] (dump_stack+0x20/0x28) > > [] (dump_stack) from [] (panic+0xc0/0x22c) > > [] (panic) from [] (mount_block_root+0x19c/0x274) > > [] (mount_block_root) from [] (mount_root+0xd0/0x124) > > [] (mount_root) from [] (prepare_namespace+0x180/ > 0x1c0) > > [] (prepare_namespace) from [] > > (kernel_init_freeable+0x220/) > > [] (kernel_init_freeable) from [] > > (kernel_init+0x18/0x11c) > > [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) > > ---[ end Kernel panic - not syncing: Invalid configuration from end > > user preveng > > > > = > > > > How to fix it ? thanks > > > > > > On 17/08/17 22:16, Leonardo Sandoval wrote: > > >On Thu, 2017-08-17 at 18:37 +0800, Riko Ho wrote: > > >>Dear Yocto Team Members， > > >> > > >>I tried to dd *.wic to nand flash but always got kernel panic, it can > > >>not find rootfs > > >>when I dd the same file to sd card, it worked. > > >> > > >from the bootloader command prompt, you may need to change the root > > >kernel parameter and point to the device where the filesystem resides. > > > > > > > > >>I copy only *.wic file to usb drive n dd it. > > >>Do I need the whole directory of images for dd? or I need hddimg? > > >> > > >>Regards, > > >>Riko > > >> > > > > > > > -- > > /* > > Sent By > > Ubuntu 16.04 LTS > > Kernel 4.4.0-92-generic > > Regards, > > Riko H > > */ > > > > -- > > ___ > > yocto mailing list > > yocto@yoctoproject.org > > https://lists.yoctoproject.org/listinfo/yocto > > -- > -- > Regards, > Ed > -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] dd to nand flash chip?
Here's the boot messages : === VFS: PARTUUID= is invalid. Expected PARTUUID=[/PARTNROFF=%d] Disabling rootwait; root= is invalid. VFS: Cannot open root device "PARTUUID=" or unknown-block(0,0): error -6 Please append a correct "root=" boot option; here are the available partitions: 01004096 ram0 (driver?) 01014096 ram1 (driver?) 01024096 ram2 (driver?) 01034096 ram3 (driver?) 01044096 ram4 (driver?) 01054096 ram5 (driver?) 01064096 ram6 (driver?) 01074096 ram7 (driver?) 01084096 ram8 (driver?) 01094096 ram9 (driver?) 010a4096 ram10 (driver?) 010b4096 ram11 (driver?) 010c4096 ram12 (driver?) 010d4096 ram13 (driver?) 010e4096 ram14 (driver?) 010f4096 ram15 (driver?) b300 3735552 mmcblk1 driver: mmcblk b301 16384 mmcblk1p1 2848be0f-01 b302 756704 mmcblk1p2 2848be0f-02 b3104096 mmcblk1boot1 (driver?) b3084096 mmcblk1boot0 (driver?) VFS: Unable to mount root fs on unknown-block(0,0) User configuration error - no valid root filesystem found Kernel panic - not syncing: Invalid configuration from end user prevents conting CPU: 0 PID: 1 Comm: swapper Not tainted 4.8.12-yocto-standard #3 Hardware name: Generic AM33XX (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [] (show_stack) from [] (dump_stack+0x20/0x28) [] (dump_stack) from [] (panic+0xc0/0x22c) [] (panic) from [] (mount_block_root+0x19c/0x274) [] (mount_block_root) from [] (mount_root+0xd0/0x124) [] (mount_root) from [] (prepare_namespace+0x180/0x1c0) [] (prepare_namespace) from [] (kernel_init_freeable+0x220/) [] (kernel_init_freeable) from [] (kernel_init+0x18/0x11c) [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) ---[ end Kernel panic - not syncing: Invalid configuration from end user preveng = How to fix it ? thanks On 17/08/17 22:16, Leonardo Sandoval wrote: On Thu, 2017-08-17 at 18:37 +0800, Riko Ho wrote: Dear Yocto Team Members， I tried to dd *.wic to nand flash but always got kernel panic, it can not find rootfs when I dd the same file to sd card, it worked. from the bootloader command prompt, you may need to change the root kernel parameter and point to the device where the filesystem resides. I copy only *.wic file to usb drive n dd it. Do I need the whole directory of images for dd? or I need hddimg? Regards, Riko -- /* Sent By Ubuntu 16.04 LTS Kernel 4.4.0-92-generic Regards, Riko H */ -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] dd to nand flash chip?
Dear Yocto Team Members， I tried to dd *.wic to nand flash but always got kernel panic, it can not find rootfs when I dd the same file to sd card, it worked. I copy only *.wic file to usb drive n dd it. Do I need the whole directory of images for dd? or I need hddimg? Regards, Riko -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] Machine definition ?
Dear Yocto Members, I have a question related with machine, If I want to use Orange Pi, how can I define my machine on local.conf ? Related with : https://github.com/linux-sunxi/meta-sunxi/tree/morty/conf/machine /* Sent By Ubuntu 16.04 LTS Regards, Riko H */ -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] layer.conf on openembedded-core ?
so from this page https://layers.openembedded.org/layerindex/branch/pyro/layers/ for example I want to use 'pyro' branch : I will do #> git clone -b pyro git://git.openembedded.org/openembedded-core On 16/08/17 07:50, Martin Jansa wrote: On Wed, Aug 16, 2017 at 07:40:10AM +0800, Riko Ho wrote: I see, so I must use all layers within the same branch. Could you tell me where I can download those layers in the sma branch? I didn't see the branch when I clone the layers. This might help you: https://git-scm.com/documentation On Aug 15, 2017 10:11 PM, "Martin Jansa" <martin.ja...@gmail.com> wrote: But it's related to it, in this thread he added oe-core/meta in master branch to BBLAYERS in poky build (already including poky/meta) from pyro branch. That's why he is seeing 3 strange issues reported in couple threads already (and this is also 3rd time someone telling him that he shouldn't include oe-core meta twice and to use the same branch across all layers). On Tue, Aug 15, 2017 at 4:12 PM, Leonardo Sandoval < leonardo.sandoval.gonza...@linux.intel.com> wrote: On Tue, 2017-08-15 at 09:09 +0800, Riko wrote: Dear Team Yocto Members, I continue compiling, and got : ERROR: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/ build-appliance-image_15.0.0.bb: No IMAGE_CMD defined for IMAGE_FSTYPES entry 'wic.vmdk' - possibly invalid type name or missing support class ERROR: Failed to parse recipe: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/ build-appliance-image_15.0.0.bb would be better if you start another thread with this issue. BTW, I just built a build-appliance without any change at local.conf and all went fine so you may have included something that you are not referring to (IMAGE_FILES?) How can I fix it ? regards, Riko On 14/08/17 23:56, Christopher Larson wrote: The openembedded-core root isn’t a layer, openembedded-core/meta is. On Mon, Aug 14, 2017 at 8:49 AM, Leonardo Sandoval <leonardo.sandoval.gonza...@linux.intel.com> wrote: On Mon, 2017-08-14 at 15:11 +0800, Riko wrote: > Dear Yocto Members, > > How can I find this file ? this is a pretty general question. are you running bitbake from the build directory? double check your conf/bblayers.conf and make sure paths there are pointing correctly. > > == > > ERROR: Unable to parse > /home/bianchi/poky/openembedded-core/conf/layer.conf: [Errno 2] file > /home/bianchi/poky/openembedded-core/conf/layer.conf not found > > > Thanks, > > Riko > -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- Christopher Larson kergoth at gmail dot com Founder - BitBake, OpenEmbedded, OpenZaurus Senior Software Engineer, Mentor Graphics -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] layer.conf on openembedded-core ?
This one : |git clone -b morty git://any layers ===> if I use morty as my branch ? correct me ? thanks | On 16/08/17 07:50, Martin Jansa wrote: On Wed, Aug 16, 2017 at 07:40:10AM +0800, Riko Ho wrote: I see, so I must use all layers within the same branch. Could you tell me where I can download those layers in the sma branch? I didn't see the branch when I clone the layers. This might help you: https://git-scm.com/documentation On Aug 15, 2017 10:11 PM, "Martin Jansa" <martin.ja...@gmail.com> wrote: But it's related to it, in this thread he added oe-core/meta in master branch to BBLAYERS in poky build (already including poky/meta) from pyro branch. That's why he is seeing 3 strange issues reported in couple threads already (and this is also 3rd time someone telling him that he shouldn't include oe-core meta twice and to use the same branch across all layers). On Tue, Aug 15, 2017 at 4:12 PM, Leonardo Sandoval < leonardo.sandoval.gonza...@linux.intel.com> wrote: On Tue, 2017-08-15 at 09:09 +0800, Riko wrote: Dear Team Yocto Members, I continue compiling, and got : ERROR: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/ build-appliance-image_15.0.0.bb: No IMAGE_CMD defined for IMAGE_FSTYPES entry 'wic.vmdk' - possibly invalid type name or missing support class ERROR: Failed to parse recipe: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/ build-appliance-image_15.0.0.bb would be better if you start another thread with this issue. BTW, I just built a build-appliance without any change at local.conf and all went fine so you may have included something that you are not referring to (IMAGE_FILES?) How can I fix it ? regards, Riko On 14/08/17 23:56, Christopher Larson wrote: The openembedded-core root isn’t a layer, openembedded-core/meta is. On Mon, Aug 14, 2017 at 8:49 AM, Leonardo Sandoval <leonardo.sandoval.gonza...@linux.intel.com> wrote: On Mon, 2017-08-14 at 15:11 +0800, Riko wrote: > Dear Yocto Members, > > How can I find this file ? this is a pretty general question. are you running bitbake from the build directory? double check your conf/bblayers.conf and make sure paths there are pointing correctly. > > == > > ERROR: Unable to parse > /home/bianchi/poky/openembedded-core/conf/layer.conf: [Errno 2] file > /home/bianchi/poky/openembedded-core/conf/layer.conf not found > > > Thanks, > > Riko > -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- Christopher Larson kergoth at gmail dot com Founder - BitBake, OpenEmbedded, OpenZaurus Senior Software Engineer, Mentor Graphics -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] layer.conf on openembedded-core ?
I see, so I must use all layers within the same branch. Could you tell me where I can download those layers in the sma branch? I didn't see the branch when I clone the layers. Regards, On Aug 15, 2017 10:11 PM, "Martin Jansa" <martin.ja...@gmail.com> wrote: > But it's related to it, in this thread he added oe-core/meta in master > branch to BBLAYERS in poky build (already including poky/meta) from pyro > branch. > > That's why he is seeing 3 strange issues reported in couple threads > already (and this is also 3rd time someone telling him that he shouldn't > include oe-core meta twice and to use the same branch across all layers). > > On Tue, Aug 15, 2017 at 4:12 PM, Leonardo Sandoval < > leonardo.sandoval.gonza...@linux.intel.com> wrote: > >> On Tue, 2017-08-15 at 09:09 +0800, Riko wrote: >> > Dear Team Yocto Members, >> > >> > I continue compiling, and got : >> > >> > ERROR: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/ >> build-appliance-image_15.0.0.bb: No IMAGE_CMD defined for IMAGE_FSTYPES >> entry 'wic.vmdk' - possibly invalid type name or missing support class >> > ERROR: Failed to parse >> > recipe: /home/bianchi/poky/openembedded-core/meta/recipes-core/images/ >> build-appliance-image_15.0.0.bb >> > >> >> would be better if you start another thread with this issue. BTW, I just >> built a build-appliance without any change at local.conf and all went >> fine so you may have included something that you are not referring to >> (IMAGE_FILES?) >> >> >> >> > How can I fix it ? >> > >> > regards, >> > >> > Riko >> > >> > >> > >> > On 14/08/17 23:56, Christopher Larson wrote: >> > >> > > The openembedded-core root isn’t a layer, openembedded-core/meta is. >> > > >> > > On Mon, Aug 14, 2017 at 8:49 AM, Leonardo Sandoval >> > > <leonardo.sandoval.gonza...@linux.intel.com> wrote: >> > > On Mon, 2017-08-14 at 15:11 +0800, Riko wrote: >> > > > Dear Yocto Members, >> > > > >> > > > How can I find this file ? >> > > >> > > >> > > this is a pretty general question. are you running bitbake >> > > from the >> > > build directory? double check your conf/bblayers.conf and >> > > make sure >> > > paths there are pointing correctly. >> > > >> > > >> > > > >> > > > == >> > > > >> > > > ERROR: Unable to parse >> > > > /home/bianchi/poky/openembedded-core/conf/layer.conf: >> > > [Errno 2] file >> > > > /home/bianchi/poky/openembedded-core/conf/layer.conf not >> > > found >> > > > >> > > > >> > > > Thanks, >> > > > >> > > > Riko >> > > > >> > > >> > > >> > > -- >> > > ___ >> > > yocto mailing list >> > > yocto@yoctoproject.org >> > > https://lists.yoctoproject.org/listinfo/yocto >> > > >> > > >> > > >> > > >> > > >> > > -- >> > > Christopher Larson >> > > kergoth at gmail dot com >> > > Founder - BitBake, OpenEmbedded, OpenZaurus >> > > Senior Software Engineer, Mentor Graphics >> > >> >> >> -- >> ___ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/yocto >> > > -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] How can I use PREFERRED_VERSION_ ?
is openembedded-core layer equal to meta-openembedded layer ? this conf was working before : BBLAYERS ?= " \ /home/bianchi/poky/meta \ /home/bianchi/poky/meta-poky \ /home/bianchi/poky/meta-yocto-bsp \ /home/bianchi/poky/openembedded-core \ /home/bianchi77/poky/meta-openembedded \ /home/bianchi77/poky/meta-openembedded/meta-oe \ /home/bianchi77/poky/meta-openembedded/meta-xfce \ /home/bianchi77/poky/meta-openembedded/meta-gnome \ /home/bianchi77/poky/meta-openembedded/meta-python \ /home/bianchi77/poky/meta-openembedded/meta-multimedia \ /home/bianchi77/poky/meta-openembedded/meta-networking \ On 15/08/17 17:20, Martin Jansa wrote: and you should start by not including 2 different versions of openembedded-core/meta in your builds. Then you won't need PREFERRED_VERSION for openssl and the issue with wic.vmdk you reported elsewhere will also probably disappear. On Tue, Aug 15, 2017 at 7:31 AM, Khem Raj <raj.k...@gmail.com <mailto:raj.k...@gmail.com>> wrote: On Mon, Aug 14, 2017 at 7:15 PM, Riko <antonius.r...@gmail.com <mailto:antonius.r...@gmail.com>> wrote: > Dear Yocto Team Members, > > How can I use PREFERRED_VERSION_ ? > > read through http://www.yoctoproject.org/docs/latest/ref-manual/ref-manual.html#var-PREFERRED_VERSION <http://www.yoctoproject.org/docs/latest/ref-manual/ref-manual.html#var-PREFERRED_VERSION> > ERROR: Multiple versions of openssl are due to be built > (/home/bianchi/poky/openembedded-core/meta/recipes-connectivity/openssl/openssl_1.1.0f.bb <http://openssl_1.1.0f.bb> > /home/bianchi/poky/meta/recipes-connectivity/openssl/openssl_1.0.2k.bb <http://openssl_1.0.2k.bb>). > Only one version of a given PN should be built in any given build. You > likely need to set PREFERRED_VERSION_openssl to select the correct version > or don't depend on multiple versions. > > > Regards, > > Riko > > -- > ___ > yocto mailing list > yocto@yoctoproject.org <mailto:yocto@yoctoproject.org> > https://lists.yoctoproject.org/listinfo/yocto <https://lists.yoctoproject.org/listinfo/yocto> -- ___ yocto mailing list yocto@yoctoproject.org <mailto:yocto@yoctoproject.org> https://lists.yoctoproject.org/listinfo/yocto <https://lists.yoctoproject.org/listinfo/yocto> -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] ERROR: gcc-source-6.3.0-6.3.0-r0 do_fetch: Fetcher failure for URL: 'file://0002-uclibc-conf.patch'. Unable to fetch URL from any source.
Do you mean this one ? Build Configuration: BB_VERSION= "1.34.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "universal" TARGET_SYS= "arm-poky-linux-gnueabi" MACHINE = "beaglebone" DISTRO= "poky" DISTRO_VERSION= "2.3.1" TUNE_FEATURES = "arm armv7a vfp neon callconvention-hard cortexa8" TARGET_FPU= "hard" meta meta-poky meta-yocto-bsp= "pyro:4a39979c8d1e560fa54240e99734a651dfbaa63a" meta = "master:5a25ed1071f0d9b7d95edcc2b5b4545f960d5f95" meta-oe meta-xfce meta-gnome meta-python meta-multimedia meta-networking = "master:a8b54e300be027fefe8a774ca1861d0fb8e80d99" meta-browser = "master:e3c3aa0591506672245904227a46519a276957e0" On 15/08/17 13:30, Khem Raj wrote: On Mon, Aug 14, 2017 at 9:42 PM, Riko <antonius.r...@gmail.com> wrote: Dear Team Yocto Member, How can I get gcc6.30 ? I got error : ERROR: gcc-source-6.3.0-6.3.0-r0 do_fetch: Fetcher failure for URL: 'file://0002-uclibc-conf.patch'. Unable to fetch URL from any source. what branch are you using and if you are using additonal layers which ones are those and what branches are they on. Here's the log : === DEBUG: Executing python function clean_recipe_sysroot DEBUG: Python function clean_recipe_sysroot finished DEBUG: Executing python function extend_recipe_sysroot NOTE: Direct dependencies are [] NOTE: DEBUG: Python function extend_recipe_sysroot finished DEBUG: Executing python function do_fetch DEBUG: Executing python function base_do_fetch DEBUG: Searching for 0001-gcc-4.3.1-ARCH_FLAGS_FOR_TARGET.patch in paths: /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/backport/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3.0/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/files/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/backport/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3.0/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/files/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/backport/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3.0/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/files/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/arm /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/backport/arm /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3.0/arm /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc/arm /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/files/arm /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/ /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/backport/ /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3.0/ /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc/ /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/files/ DEBUG: Searching for 0002-uclibc-conf.patch in paths: /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/backport/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3.0/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/files/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/backport/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3.0/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/files/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/backport/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3.0/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/files/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/a
Re: [yocto] ERROR: gcc-source-6.3.0-6.3.0-r0 do_fetch: Fetcher failure for URL: 'file://0002-uclibc-conf.patch'. Unable to fetch URL from any source.
which branch are you talking about ? I don't understand your question On 15/08/17 13:30, Khem Raj wrote: On Mon, Aug 14, 2017 at 9:42 PM, Riko <antonius.r...@gmail.com> wrote: Dear Team Yocto Member, How can I get gcc6.30 ? I got error : ERROR: gcc-source-6.3.0-6.3.0-r0 do_fetch: Fetcher failure for URL: 'file://0002-uclibc-conf.patch'. Unable to fetch URL from any source. what branch are you using and if you are using additonal layers which ones are those and what branches are they on. Here's the log : === DEBUG: Executing python function clean_recipe_sysroot DEBUG: Python function clean_recipe_sysroot finished DEBUG: Executing python function extend_recipe_sysroot NOTE: Direct dependencies are [] NOTE: DEBUG: Python function extend_recipe_sysroot finished DEBUG: Executing python function do_fetch DEBUG: Executing python function base_do_fetch DEBUG: Searching for 0001-gcc-4.3.1-ARCH_FLAGS_FOR_TARGET.patch in paths: /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/backport/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3.0/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/files/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/backport/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3.0/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/files/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/backport/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3.0/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/files/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/arm /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/backport/arm /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3.0/arm /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc/arm /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/files/arm /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/ /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/backport/ /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3.0/ /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc/ /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/files/ DEBUG: Searching for 0002-uclibc-conf.patch in paths: /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/backport/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3.0/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/files/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/backport/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3.0/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/files/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/backport/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3.0/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/files/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/arm /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/backport/arm /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3.0/arm /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc/arm /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/files/arm /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/ /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/backport/ /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3.0/ /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc/ /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/files/ DEBUG: Defaulting to /home/bianchi/poky/build/downloads/0002-uclibc-conf.patch for 0002-uclibc-conf.patch
[yocto] ERROR: gcc-source-6.3.0-6.3.0-r0 do_fetch: Fetcher failure for URL: 'file://0002-uclibc-conf.patch'. Unable to fetch URL from any source.
', '', '0002-uclibc-conf.patch', '', '', OrderedDict()] comparing ['https?$', '.*', '/.*', '', '', OrderedDict()] to ['http', 'sources.openembedded.org', '/', '', '', OrderedDict()] DEBUG: For url ['file', '', '0002-uclibc-conf.patch', '', '', OrderedDict()] comparing ['ftp', '.*', '/.*', '', '', OrderedDict()] to ['http', 'sources.openembedded.org', '/', '', '', OrderedDict()] DEBUG: For url ['file', '', '0002-uclibc-conf.patch', '', '', OrderedDict()] comparing ['npm', '.*', '/.*', '', '', OrderedDict()] to ['http', 'sources.openembedded.org', '/', '', '', OrderedDict()] DEBUG: For url ['file', '', '0002-uclibc-conf.patch', '', '', OrderedDict()] comparing ['http', 'search.cpan.org', '/CPAN', '', '', OrderedDict()] to ['http', 'cpan.metacpan.org', '/', '', '', OrderedDict()] DEBUG: For url ['file', '', '0002-uclibc-conf.patch', '', '', OrderedDict()] comparing ['http', 'search.cpan.org', '/CPAN', '', '', OrderedDict()] to ['http', 'search.cpan.org', '/CPAN/', '', '', OrderedDict()] ERROR: Fetcher failure: Unable to find file file://0002-uclibc-conf.patch anywhere. The paths that were searched were: /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/backport/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3.0/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/files/poky /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/backport/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3.0/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/files/beaglebone /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/backport/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3.0/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/files/armv7a /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/arm /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/backport/arm /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3.0/arm /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc/arm /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/files/arm /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/ /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3/backport/ /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc-6.3.0/ /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/gcc/ /home/bianchi/poky/openembedded-core/meta/recipes-devtools/gcc/files/ /home/bianchi/poky/build/downloads ERROR: Fetcher failure for URL: 'file://0002-uclibc-conf.patch'. Unable to fetch URL from any source. DEBUG: Python function base_do_fetch finished DEBUG: Python function do_fetch finished ERROR: Function failed: base_do_fetch Regards, Riko -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] How can I use PREFERRED_VERSION_ ?
Dear Yocto Team Members, How can I use PREFERRED_VERSION_ ? ERROR: Multiple versions of openssl are due to be built (/home/bianchi/poky/openembedded-core/meta/recipes-connectivity/openssl/openssl_1.1.0f.bb /home/bianchi/poky/meta/recipes-connectivity/openssl/openssl_1.0.2k.bb). Only one version of a given PN should be built in any given build. You likely need to set PREFERRED_VERSION_openssl to select the correct version or don't depend on multiple versions. Regards, Riko -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] layer.conf on openembedded-core ?
Dear Team Yocto Members,
I continue compiling, and got :
ERROR:
/home/bianchi/poky/openembedded-core/meta/recipes-core/images/build-appliance-image_15.0.0.bb:
No IMAGE_CMD defined for IMAGE_FSTYPES entry 'wic.vmdk' - possibly
invalid type name or missing support class
ERROR: Failed to parse recipe:
/home/bianchi/poky/openembedded-core/meta/recipes-core/images/build-appliance-image_15.0.0.bb
How can I fix it ?
regards,
Riko
On 14/08/17 23:56, Christopher Larson wrote:
The openembedded-core root isn’t a layer, openembedded-core/meta is.
On Mon, Aug 14, 2017 at 8:49 AM, Leonardo Sandoval
<leonardo.sandoval.gonza...@linux.intel.com
<mailto:leonardo.sandoval.gonza...@linux.intel.com>> wrote:
On Mon, 2017-08-14 at 15:11 +0800, Riko wrote:
> Dear Yocto Members,
>
> How can I find this file ?
this is a pretty general question. are you running bitbake from the
build directory? double check your conf/bblayers.conf and make sure
paths there are pointing correctly.
>
> ==
>
> ERROR: Unable to parse
> /home/bianchi/poky/openembedded-core/conf/layer.conf: [Errno 2] file
> /home/bianchi/poky/openembedded-core/conf/layer.conf not found
>
>
> Thanks,
>
> Riko
>
--
___
yocto mailing list
yocto@yoctoproject.org <mailto:yocto@yoctoproject.org>
https://lists.yoctoproject.org/listinfo/yocto
<https://lists.yoctoproject.org/listinfo/yocto>
--
Christopher Larson
kergoth at gmail dot com
Founder - BitBake, OpenEmbedded, OpenZaurus
Senior Software Engineer, Mentor Graphics
--
___
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] layer.conf on openembedded-core ?
Thanks for the clue, now it's compiling,
On 14/08/17 23:56, Christopher Larson wrote:
The openembedded-core root isn’t a layer, openembedded-core/meta is.
On Mon, Aug 14, 2017 at 8:49 AM, Leonardo Sandoval
<leonardo.sandoval.gonza...@linux.intel.com
<mailto:leonardo.sandoval.gonza...@linux.intel.com>> wrote:
On Mon, 2017-08-14 at 15:11 +0800, Riko wrote:
> Dear Yocto Members,
>
> How can I find this file ?
this is a pretty general question. are you running bitbake from the
build directory? double check your conf/bblayers.conf and make sure
paths there are pointing correctly.
>
> ==
>
> ERROR: Unable to parse
> /home/bianchi/poky/openembedded-core/conf/layer.conf: [Errno 2] file
> /home/bianchi/poky/openembedded-core/conf/layer.conf not found
>
>
> Thanks,
>
> Riko
>
--
___
yocto mailing list
yocto@yoctoproject.org <mailto:yocto@yoctoproject.org>
https://lists.yoctoproject.org/listinfo/yocto
<https://lists.yoctoproject.org/listinfo/yocto>
--
Christopher Larson
kergoth at gmail dot com
Founder - BitBake, OpenEmbedded, OpenZaurus
Senior Software Engineer, Mentor Graphics
--
___
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
[yocto] layer.conf on openembedded-core ?
Dear Yocto Members, How can I find this file ? == ERROR: Unable to parse /home/bianchi/poky/openembedded-core/conf/layer.conf: [Errno 2] file /home/bianchi/poky/openembedded-core/conf/layer.conf not found Thanks, Riko -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] bitbake error ?
Dear Yocto member,
I fixed it
on /etc/resolv.conf
nameserver 8.8.8.8
Thanks for helping everyone
On 10/08/17 05:13, Burton, Ross wrote:
Maybe. We don't have your computer, so this is your problem to resolve.
Ross
On 9 August 2017 at 22:06, Riko Ho <antonius.r...@gmail.com
<mailto:antonius.r...@gmail.com>> wrote:
Can it be related with:
https://askubuntu.com/questions/425484/unable-to-use-wget-command
<https://askubuntu.com/questions/425484/unable-to-use-wget-command>
?
On 09/08/2017 8:43 PM, "Bejar-Colonia, Carlos"
<carlos.bejar-colo...@philips.com
<mailto:carlos.bejar-colo...@philips.com>> wrote:
This issue seems to be related to proxy server. Probably your
network is behind a proxy.
This may help:
https://wiki.yoctoproject.org/wiki/Working_Behind_a_Network_Proxy
<https://wiki.yoctoproject.org/wiki/Working_Behind_a_Network_Proxy>
-Carlos B
*From:*yocto-boun...@yoctoproject.org
<mailto:yocto-boun...@yoctoproject.org>
[mailto:yocto-boun...@yoctoproject.org
<mailto:yocto-boun...@yoctoproject.org>] *On Behalf Of
*Burton, Ross
*Sent:* Wednesday, August 09, 2017 6:35 AM
*To:* Riko Ho <antonius.r...@gmail.com
<mailto:antonius.r...@gmail.com>>
*Cc:* N: <yocto@yoctoproject.org <mailto:yocto@yoctoproject.org>>
*Subject:* Re: [yocto] bitbake error ?
I've no idea why you can't connect to example.com
<http://example.com> using wget, you'll have to debug it yourself.
Ross
On 9 August 2017 at 11:27, Riko Ho <antonius.r...@gmail.com
<mailto:antonius.r...@gmail.com>> wrote:
so what s the issue？ my connection is working. is it
related with /etc/hosts?
thanks
On Aug 9, 2017 4:38 PM, "Burton, Ross"
<ross.bur...@intel.com <mailto:ross.bur...@intel.com>> wrote:
Yep. That's your problem.
$ wget https://www.example.com/
--2017-08-09 09:37:43-- https://www.example.com/
Resolving www.example.com <http://www.example.com>...
93.184.216.34, 2606:2800:220:1:248:1893:25c8:1946
Connecting to www.example.com
<http://www.example.com>|93.184.216.34|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1270 (1.2K) [text/html]
Saving to: ‘index.html’
index.html 100%[===>] 1.24K
--.-KB/s in 0s
2017-08-09 09:37:44 (15.3 MB/s) - ‘index.html’ saved
[1270/1270]
Works for me. Your network or wget is broken, and
that is unrelated to bitbake/yocto/etc.
Ross
On 9 August 2017 at 09:34, Riko
<antonius.r...@gmail.com
<mailto:antonius.r...@gmail.com>> wrote:
This one ?
bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~/poky/build$
wget https://www.example.com/
--2017-08-09 16:33:05-- https://www.example.com/
Resolving www.example.com <http://www.example.com>
(www.example.com <http://www.example.com>)...
failed: Name or service not known.
wget: unable to resolve host address
'www.example.com’ <http://www.example.com%E2%80%99>
On 09/08/17 16:31, Burton, Ross wrote:
For some reason, bitbake can't do "wget
https://www.example.com/;. Try running that
command outside of bitbake and seeing if it
returns any errors.
Ross
On 9 August 2017 at 09:29, Riko
<antonius.r...@gmail.com
<mailto:antonius.r...@gmail.com>> wrote:
Dear Yocto Member,
I have downloaded fresh install of yocto
but got error, here's the trace :
bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~$
git clone -b pyro
git://git.yoctoproject.org/poky.git
<http://git.yoctoproject.org/poky.git>
Cloning into 'poky'...
remote: Counting objects: 373183, done.
remote: Compressing objects: 100%
(89366/89366), done.
remote: Total 373183 (delta 27
Re: [yocto] bitbake error ?
When I test on browser :
https://www.example.com/
I got server not found ??
On 09/08/17 16:38, Burton, Ross wrote:
Yep. That's your problem.
$ wget https://www.example.com/
--2017-08-09 09:37:43-- https://www.example.com/
Resolving www.example.com... 93.184.216.34,
2606:2800:220:1:248:1893:25c8:1946
Connecting to www.example.com
<http://www.example.com>|93.184.216.34|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1270 (1.2K) [text/html]
Saving to: ‘index.html’
index.html 100%[===>] 1.24K --.-KB/sin 0s
2017-08-09 09:37:44 (15.3 MB/s) - ‘index.html’ saved [1270/1270]
Works for me. Your network or wget is broken, and that is unrelated
to bitbake/yocto/etc.
Ross
On 9 August 2017 at 09:34, Riko <antonius.r...@gmail.com
<mailto:antonius.r...@gmail.com>> wrote:
This one ?
bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~/poky/build$ wget
https://www.example.com/
--2017-08-09 16:33:05-- https://www.example.com/
Resolving www.example.com <http://www.example.com>
(www.example.com <http://www.example.com>)... failed: Name or
service not known.
wget: unable to resolve host address 'www.example.com’
<http://www.example.com%E2%80%99>
On 09/08/17 16:31, Burton, Ross wrote:
For some reason, bitbake can't do "wget
https://www.example.com/;. Try running that command outside of
bitbake and seeing if it returns any errors.
Ross
On 9 August 2017 at 09:29, Riko <antonius.r...@gmail.com
<mailto:antonius.r...@gmail.com>> wrote:
Dear Yocto Member,
I have downloaded fresh install of yocto but got error,
here's the trace :
bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~$ git clone -b
pyro git://git.yoctoproject.org/poky.git
<http://git.yoctoproject.org/poky.git>
Cloning into 'poky'...
remote: Counting objects: 373183, done.
remote: Compressing objects: 100% (89366/89366), done.
remote: Total 373183 (delta 277418), reused 373031 (delta 277266)
Receiving objects: 100% (373183/373183), 134.71 MiB | 1.47
MiB/s, done.
Resolving deltas: 100% (277418/277418), done.
Checking connectivity... done.
bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~/poky$ source
oe-init-build-env
You had no conf/local.conf file. This configuration file has
therefore been
created for you with some default values. You may wish to
edit it to, for
example, select a different MACHINE (target hardware). See
conf/local.conf
for more information as common configuration options are
commented.
You had no conf/bblayers.conf file. This configuration file
has therefore been
created for you with some default values. To add additional
metadata layers
into your configuration please add entries to conf/bblayers.conf.
The Yocto Project has extensive documentation about OE
including a reference
manual which can be found at:
http://yoctoproject.org/documentation
<http://yoctoproject.org/documentation>
For more information about OpenEmbedded see their website:
http://www.openembedded.org/
### Shell environment set up for builds. ###
You can now run 'bitbake '
Common targets are:
core-image-minimal
core-image-sato
meta-toolchain
meta-ide-support
You can also run generated qemu images with a command like
'runqemu qemux86'
bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~/poky/build$
bitbake core-image-minimal
ERROR: OE-core's config sanity checker detected a potential
misconfiguration.
Either fix the cause of this error or at your own risk
disable the checker (see sanity.conf).
Following is the list of potential problems / advisories:
Fetcher failure for URL: 'https://www.example.com/'. URL
https://www.example.com/ doesn't work.
Please ensure your host's network is configured correctly,
or set BB_NO_NETWORK = "1" to disable network access if
all required sources are on local disk.
Summary: There was 1 ERROR message shown, returning a
non-zero exit code.
Any suggestions ?
I'm using ubuntu 16.04,
Thanks
--
___
yocto mailing list
yocto@yoctoproject.org <mailto:yocto@yoctoproject.org>
https://lists.yoctoproject.org/listinfo/yocto
<https://lists.yoctoproject.org/listinfo/yocto>
--
___
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] bitbake error ?
Can it be related with: https://askubuntu.com/questions/425484/unable-to-use-wget-command ? On 09/08/2017 8:43 PM, "Bejar-Colonia, Carlos" < carlos.bejar-colo...@philips.com> wrote: This issue seems to be related to proxy server. Probably your network is behind a proxy. This may help: https://wiki.yoctoproject.org/wiki/Working_Behind_a_Network_Proxy -Carlos B *From:* yocto-boun...@yoctoproject.org [mailto:yocto-bounces@ yoctoproject.org] *On Behalf Of *Burton, Ross *Sent:* Wednesday, August 09, 2017 6:35 AM *To:* Riko Ho <antonius.r...@gmail.com> *Cc:* N: <yocto@yoctoproject.org> *Subject:* Re: [yocto] bitbake error ? I've no idea why you can't connect to example.com using wget, you'll have to debug it yourself. Ross On 9 August 2017 at 11:27, Riko Ho <antonius.r...@gmail.com> wrote: so what s the issue？ my connection is working. is it related with /etc/hosts? thanks On Aug 9, 2017 4:38 PM, "Burton, Ross" <ross.bur...@intel.com> wrote: Yep. That's your problem. $ wget https://www.example.com/ --2017-08-09 09:37:43-- https://www.example.com/ Resolving www.example.com... 93.184.216.34, 2606:2800:220:1:248:1893:25c8: 1946 Connecting to www.example.com|93.184.216.34|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 1270 (1.2K) [text/html] Saving to: ‘index.html’ index.html 100%[===>] 1.24K --.-KB/sin 0s 2017-08-09 09:37:44 (15.3 MB/s) - ‘index.html’ saved [1270/1270] Works for me. Your network or wget is broken, and that is unrelated to bitbake/yocto/etc. Ross On 9 August 2017 at 09:34, Riko <antonius.r...@gmail.com> wrote: This one ? bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~/poky/build$ wget https://www.example.com/ --2017-08-09 16:33:05-- https://www.example.com/ Resolving www.example.com (www.example.com)... failed: Name or service not known. wget: unable to resolve host address 'www.example.com’ On 09/08/17 16:31, Burton, Ross wrote: For some reason, bitbake can't do "wget https://www.example.com/;. Try running that command outside of bitbake and seeing if it returns any errors. Ross On 9 August 2017 at 09:29, Riko <antonius.r...@gmail.com> wrote: Dear Yocto Member, I have downloaded fresh install of yocto but got error, here's the trace : bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~$ git clone -b pyro git:// git.yoctoproject.org/poky.git Cloning into 'poky'... remote: Counting objects: 373183, done. remote: Compressing objects: 100% (89366/89366), done. remote: Total 373183 (delta 277418), reused 373031 (delta 277266) Receiving objects: 100% (373183/373183), 134.71 MiB | 1.47 MiB/s, done. Resolving deltas: 100% (277418/277418), done. Checking connectivity... done. bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~/poky$ source oe-init-build-env You had no conf/local.conf file. This configuration file has therefore been created for you with some default values. You may wish to edit it to, for example, select a different MACHINE (target hardware). See conf/local.conf for more information as common configuration options are commented. You had no conf/bblayers.conf file. This configuration file has therefore been created for you with some default values. To add additional metadata layers into your configuration please add entries to conf/bblayers.conf. The Yocto Project has extensive documentation about OE including a reference manual which can be found at: http://yoctoproject.org/documentation For more information about OpenEmbedded see their website: http://www.openembedded.org/ ### Shell environment set up for builds. ### You can now run 'bitbake ' Common targets are: core-image-minimal core-image-sato meta-toolchain meta-ide-support You can also run generated qemu images with a command like 'runqemu qemux86' bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~/poky/build$ bitbake core-image-minimal ERROR: OE-core's config sanity checker detected a potential misconfiguration. Either fix the cause of this error or at your own risk disable the checker (see sanity.conf). Following is the list of potential problems / advisories: Fetcher failure for URL: 'https://www.example.com/'. URL https://www.example.com/ doesn't work. Please ensure your host's network is configured correctly, or set BB_NO_NETWORK = "1" to disable network access if all required sources are on local disk. Summary: There was 1 ERROR message shown, returning a non-zero exit code. Any suggestions ? I'm using ubuntu 16.04, Thanks -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- The information contained in this message may be confidential and legally protected under applicable law. The message is intended solely for the addressee(s). If you
Re: [yocto] bitbake error ?
so what s the issue？ my connection is working. is it related with /etc/hosts? thanks On Aug 9, 2017 4:38 PM, "Burton, Ross" <ross.bur...@intel.com> wrote: > Yep. That's your problem. > > $ wget https://www.example.com/ > --2017-08-09 09:37:43-- https://www.example.com/ > Resolving www.example.com... 93.184.216.34, 2606:2800:220:1:248:1893:25c8: > 1946 > Connecting to www.example.com|93.184.216.34|:443... connected. > HTTP request sent, awaiting response... 200 OK > Length: 1270 (1.2K) [text/html] > Saving to: ‘index.html’ > > index.html 100%[===>] 1.24K --.-KB/sin 0s > > 2017-08-09 09:37:44 (15.3 MB/s) - ‘index.html’ saved [1270/1270] > > Works for me. Your network or wget is broken, and that is unrelated to > bitbake/yocto/etc. > > Ross > > On 9 August 2017 at 09:34, Riko <antonius.r...@gmail.com> wrote: > >> This one ? >> >> bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~/poky/build$ wget >> https://www.example.com/ >> --2017-08-09 16:33:05-- https://www.example.com/ >> Resolving www.example.com (www.example.com)... failed: Name or service >> not known. >> wget: unable to resolve host address 'www.example.com’ >> >> >> On 09/08/17 16:31, Burton, Ross wrote: >> >> For some reason, bitbake can't do "wget https://www.example.com/;. Try >> running that command outside of bitbake and seeing if it returns any >> errors. >> >> Ross >> >> On 9 August 2017 at 09:29, Riko <antonius.r...@gmail.com> wrote: >> >>> Dear Yocto Member, >>> >>> >>> I have downloaded fresh install of yocto but got error, here's the trace >>> : >>> >>> bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~$ git clone -b pyro git:// >>> git.yoctoproject.org/poky.git >>> Cloning into 'poky'... >>> remote: Counting objects: 373183, done. >>> remote: Compressing objects: 100% (89366/89366), done. >>> remote: Total 373183 (delta 277418), reused 373031 (delta 277266) >>> Receiving objects: 100% (373183/373183), 134.71 MiB | 1.47 MiB/s, done. >>> Resolving deltas: 100% (277418/277418), done. >>> Checking connectivity... done. >>> >>> >>> bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~/poky$ source >>> oe-init-build-env >>> You had no conf/local.conf file. This configuration file has therefore >>> been >>> created for you with some default values. You may wish to edit it to, for >>> example, select a different MACHINE (target hardware). See >>> conf/local.conf >>> for more information as common configuration options are commented. >>> >>> You had no conf/bblayers.conf file. This configuration file has >>> therefore been >>> created for you with some default values. To add additional metadata >>> layers >>> into your configuration please add entries to conf/bblayers.conf. >>> >>> The Yocto Project has extensive documentation about OE including a >>> reference >>> manual which can be found at: >>> http://yoctoproject.org/documentation >>> >>> For more information about OpenEmbedded see their website: >>> http://www.openembedded.org/ >>> >>> >>> ### Shell environment set up for builds. ### >>> >>> You can now run 'bitbake ' >>> >>> Common targets are: >>> core-image-minimal >>> core-image-sato >>> meta-toolchain >>> meta-ide-support >>> >>> You can also run generated qemu images with a command like 'runqemu >>> qemux86' >>> bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~/poky/build$ bitbake >>> core-image-minimal >>> ERROR: OE-core's config sanity checker detected a potential >>> misconfiguration. >>> Either fix the cause of this error or at your own risk disable the >>> checker (see sanity.conf). >>> Following is the list of potential problems / advisories: >>> >>> Fetcher failure for URL: 'https://www.example.com/'. URL >>> https://www.example.com/ doesn't work. >>> Please ensure your host's network is configured correctly, >>> or set BB_NO_NETWORK = "1" to disable network access if >>> all required sources are on local disk. >>> >>> >>> Summary: There was 1 ERROR message shown, returning a non-zero exit code. >>> >>> >>> Any suggestions ? >>> >>> I'm using ubuntu 16.04, >>> >>> Thanks >>> >>> -- >>> ___ >>> yocto mailing list >>> yocto@yoctoproject.org >>> https://lists.yoctoproject.org/listinfo/yocto >>> >> >> >> > -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] bitbake error ?
This one ? bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~/poky/build$ wget https://www.example.com/ --2017-08-09 16:33:05-- https://www.example.com/ Resolving www.example.com (www.example.com)... failed: Name or service not known. wget: unable to resolve host address 'www.example.com’ On 09/08/17 16:31, Burton, Ross wrote: For some reason, bitbake can't do "wget https://www.example.com/;. Try running that command outside of bitbake and seeing if it returns any errors. Ross On 9 August 2017 at 09:29, Riko <antonius.r...@gmail.com <mailto:antonius.r...@gmail.com>> wrote: Dear Yocto Member, I have downloaded fresh install of yocto but got error, here's the trace : bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~$ git clone -b pyro git://git.yoctoproject.org/poky.git <http://git.yoctoproject.org/poky.git> Cloning into 'poky'... remote: Counting objects: 373183, done. remote: Compressing objects: 100% (89366/89366), done. remote: Total 373183 (delta 277418), reused 373031 (delta 277266) Receiving objects: 100% (373183/373183), 134.71 MiB | 1.47 MiB/s, done. Resolving deltas: 100% (277418/277418), done. Checking connectivity... done. bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~/poky$ source oe-init-build-env You had no conf/local.conf file. This configuration file has therefore been created for you with some default values. You may wish to edit it to, for example, select a different MACHINE (target hardware). See conf/local.conf for more information as common configuration options are commented. You had no conf/bblayers.conf file. This configuration file has therefore been created for you with some default values. To add additional metadata layers into your configuration please add entries to conf/bblayers.conf. The Yocto Project has extensive documentation about OE including a reference manual which can be found at: http://yoctoproject.org/documentation <http://yoctoproject.org/documentation> For more information about OpenEmbedded see their website: http://www.openembedded.org/ ### Shell environment set up for builds. ### You can now run 'bitbake ' Common targets are: core-image-minimal core-image-sato meta-toolchain meta-ide-support You can also run generated qemu images with a command like 'runqemu qemux86' bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~/poky/build$ bitbake core-image-minimal ERROR: OE-core's config sanity checker detected a potential misconfiguration. Either fix the cause of this error or at your own risk disable the checker (see sanity.conf). Following is the list of potential problems / advisories: Fetcher failure for URL: 'https://www.example.com/'. URL https://www.example.com/ doesn't work. Please ensure your host's network is configured correctly, or set BB_NO_NETWORK = "1" to disable network access if all required sources are on local disk. Summary: There was 1 ERROR message shown, returning a non-zero exit code. Any suggestions ? I'm using ubuntu 16.04, Thanks -- ___ yocto mailing list yocto@yoctoproject.org <mailto:yocto@yoctoproject.org> https://lists.yoctoproject.org/listinfo/yocto <https://lists.yoctoproject.org/listinfo/yocto> -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] bitbake error ?
Dear Yocto Member, I have downloaded fresh install of yocto but got error, here's the trace : bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~$ git clone -b pyro git://git.yoctoproject.org/poky.git Cloning into 'poky'... remote: Counting objects: 373183, done. remote: Compressing objects: 100% (89366/89366), done. remote: Total 373183 (delta 277418), reused 373031 (delta 277266) Receiving objects: 100% (373183/373183), 134.71 MiB | 1.47 MiB/s, done. Resolving deltas: 100% (277418/277418), done. Checking connectivity... done. bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~/poky$ source oe-init-build-env You had no conf/local.conf file. This configuration file has therefore been created for you with some default values. You may wish to edit it to, for example, select a different MACHINE (target hardware). See conf/local.conf for more information as common configuration options are commented. You had no conf/bblayers.conf file. This configuration file has therefore been created for you with some default values. To add additional metadata layers into your configuration please add entries to conf/bblayers.conf. The Yocto Project has extensive documentation about OE including a reference manual which can be found at: http://yoctoproject.org/documentation For more information about OpenEmbedded see their website: http://www.openembedded.org/ ### Shell environment set up for builds. ### You can now run 'bitbake ' Common targets are: core-image-minimal core-image-sato meta-toolchain meta-ide-support You can also run generated qemu images with a command like 'runqemu qemux86' bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~/poky/build$ bitbake core-image-minimal ERROR: OE-core's config sanity checker detected a potential misconfiguration. Either fix the cause of this error or at your own risk disable the checker (see sanity.conf). Following is the list of potential problems / advisories: Fetcher failure for URL: 'https://www.example.com/'. URL https://www.example.com/ doesn't work. Please ensure your host's network is configured correctly, or set BB_NO_NETWORK = "1" to disable network access if all required sources are on local disk. Summary: There was 1 ERROR message shown, returning a non-zero exit code. Any suggestions ? I'm using ubuntu 16.04, Thanks -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] meta-kodi questions ?
Dear Yocto Team Member,
I want to build my image with meta-kodi for beagle but I got this issue :
==
ERROR: libffi-native-3.2.1-r0 do_configure: Function failed:
do_configure (log file is located at
/home/bianchi77/poky/build/tmp/work/x86_64-linux/libffi-native/3.2.1-r0/temp/log.do_configure.15177)
ERROR: Logfile of failure stored in:
/home/bianchi77/poky/build/tmp/work/x86_64-linux/libffi-native/3.2.1-r0/temp/log.do_configure.15177
Log data follows:
| DEBUG: Executing shell function autotools_preconfigure
| DEBUG: Shell function autotools_preconfigure finished
| DEBUG: Executing python function autotools_aclocals
| DEBUG: SITE files ['endian-little', 'common-linux', 'common-glibc',
'bit-64', 'x86_64-linux', 'common']
| DEBUG: Python function autotools_aclocals finished
| DEBUG: Executing shell function do_configure
| Unescaped left brace in regex is illegal here in regex; marked by <--
HERE in m/\${ <-- HERE ([^ \t=:+{}]+)}/ at
/home/bianchi77/poky/build/tmp/work/x86_64-linux/libffi-native/3.2.1-r0/recipe-sysroot-native/usr/bin/automake
line 3940.
| Unescaped left brace in regex is illegal here in regex; marked by <--
HERE in m/\${ <-- HERE ([^ \t=:+{}]+)}/ at
/home/bianchi77/poky/build/tmp/work/x86_64-linux/libffi-native/3.2.1-r0/recipe-sysroot-native/usr/bin/automake
line 3940.
| WARNING: exit code 255 from a shell command.
=
Does anyone know any ideas about it ?
Thanks,
--
*
/***/
Sent by Ubuntu LTS 16.04,
Kind regards,
Riko Ho
/***/
*
--
___
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
[yocto] Mplayer how to?
Dear Yocto Team Member, How can I add mplayer to my image? Regards, Riko Ho -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] DEBUG: automake-native: class native found in blacklist, disable icecc ?
Still got the same error after installing it? Any other clues?
On Aug 2, 2017 9:53 PM, "Khem Raj" <raj.k...@gmail.com> wrote:
> On Tue, Aug 1, 2017 at 11:42 PM, Riko Ho <antonius.r...@gmail.com> wrote:
> > Could it be this one ?
> >
> > https://www.devmanuals.net/install/ubuntu/ubuntu-12-04-
> lts-precise-pangolin/install-libthread-queue-perl.html
> >
>
> yes
>
> > Thanks
> >
> >
> > On 02/08/17 14:38, Khem Raj wrote:
> >
> > apply the solutions they may work for ubuntu
> >
> > On Tue, Aug 1, 2017 at 11:33 PM, Riko Ho <antonius.r...@gmail.com>
> wrote:
> >
> > Dear Yocto Team Member,
> >
> > I'm building with Ubuntu 16
> >
> >
> > On 02/08/17 14:31, Khem Raj wrote:
> >
> > On Tue, Aug 1, 2017 at 11:18 PM, Riko Ho <antonius.r...@gmail.com>
> wrote:
> >
> > Dear Yocto Team Member,
> >
> > That's the branch :
> >
> > ==
> >
> > meta-poky
> > meta-yocto-bsp= "pyro:e5aa1ac23669a45491de9ecffac491c01e70203f"
> > openembedded-core = "master:2fd0757ae7fd63bc93a4ce8579c6ba0cdbb4c1cd"
> > meta-openembedded
> > meta-oe
> > meta-xfce
> > meta-gnome
> > meta-python
> > meta-multimedia
> > meta-networking = "master:b063789560bfb9c60a7a15277b5b3a9839b5ba74"
> > meta-browser =
> > "firefox-52.1.2esr-2:c79cf6c7811afd2cd167e8967e3c29b1e797371e"
> > meta-ti = "master:872d418f6e503dea66e3533f43e7a17618183982"
> >
> > Initialising tasks: 100%
> > |###
> #|
> > Time: 0:00:08
> > NOTE: Executing SetScene Tasks
> > NOTE: Executing RunQueue Tasks
> > ERROR: automake-native-1.15-r0 do_compile: oe_runmake failed
> > ERROR: automake-native-1.15-r0 do_compile: Function failed: do_compile
> (log
> > file is located at
> > /home/bianchi77/poky/build/tmp/work/x86_64-linux/
> automake-native/1.15-r0/temp/log.do_compile.9291)
> > ERROR: Logfile of failure stored in:
> > /home/bianchi77/poky/build/tmp/work/x86_64-linux/
> automake-native/1.15-r0/temp/log.do_compile.9291
> > Log data follows:
> > | DEBUG: Executing shell function do_compile
> > | NOTE: Using icecc
> > | NOTE: make -j 10
> > | ERROR: oe_runmake failed
> > | : && /home/bianchi77/poky/build/tmp/hosttools/mkdir -p doc && {
> > PATH='/home/bianchi77/poky/build/tmp/work/x86_64-linux/
> automake-native/1.15-r0/build/t/wrap:'$PATH
> > && export PATH; } && /usr/bin/env perl ../automake-1.15/doc/help2man
> > --output=doc/automake-1.15.1 automake-1.15
> > | help2man: can't get `--help' info from automake-1.15
> >
> > What OS do you run on build machine ?
> > if its archlinux then apply this patch to automake
> >
> > https://gist.github.com/xywei/03b546054f0d2e2f76c5ac530c88268a
> >
> > otherwise if its centos7 then install
> >
> > yum install perl-Thread-Queue
> >
> >
> >
> > | Try `--no-discard-stderr' if option outputs to stderr
> > | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed
> > | make: *** [doc/automake-1.15.1] Error 255
> > | ERROR: Function failed: do_compile (log file is located at
> > /home/bianchi77/poky/build/tmp/work/x86_64-linux/
> automake-native/1.15-r0/temp/log.do_compile.9291)
> > ERROR: Task
> > (virtual:native:/home/bianchi77/poky/meta/recipes-
> devtools/automake/automake_1.15.bb:do_compile)
> > failed with exit code '1'
> > NOTE: Tasks Summary: Attempted 845 tasks of which 844 didn't need to be
> > rerun and 1 failed.
> >
> > Summary: 1 task failed:
> >
> > virtual:native:/home/bianchi77/poky/meta/recipes-
> devtools/automake/automake_1.15.bb:do_compile
> > Summary: There were 4 WARNING messages shown.
> > Summary: There were 2 ERROR messages shown, returning a non-zero exit
> code.
> > bianchi77@bianchi77-HP-Pavilion-dv6-Notebook-PC:~/poky/build$
> >
> > How can I fix that automake error ?
> >
> > I tried to run bitbake core-image-minimal for it.
> > Thanks,
> >
> > On 31/07/17 21:26, Burton, Ross wrote:
> >
> > Then the branch you checked out. git branch will tell you.
> >
> > Ross
> >
> > On 31 July 2017 at 14:17, Riko Ho <antonius.r...@gmail.com> wrote:
> >
> > Git clone ...
> >
> > On Jul 31, 2017 9:16 PM, "Burton, Ross" <ross.bur...@intel.com> wrote:
> >
Re: [yocto] DEBUG: automake-native: class native found in blacklist, disable icecc ?
Could it be this one ?
https://www.devmanuals.net/install/ubuntu/ubuntu-12-04-lts-precise-pangolin/install-libthread-queue-perl.html
Thanks
On 02/08/17 14:38, Khem Raj wrote:
apply the solutions they may work for ubuntu
On Tue, Aug 1, 2017 at 11:33 PM, Riko Ho <antonius.r...@gmail.com> wrote:
Dear Yocto Team Member,
I'm building with Ubuntu 16
On 02/08/17 14:31, Khem Raj wrote:
On Tue, Aug 1, 2017 at 11:18 PM, Riko Ho <antonius.r...@gmail.com> wrote:
Dear Yocto Team Member,
That's the branch :
==
meta-poky
meta-yocto-bsp= "pyro:e5aa1ac23669a45491de9ecffac491c01e70203f"
openembedded-core = "master:2fd0757ae7fd63bc93a4ce8579c6ba0cdbb4c1cd"
meta-openembedded
meta-oe
meta-xfce
meta-gnome
meta-python
meta-multimedia
meta-networking = "master:b063789560bfb9c60a7a15277b5b3a9839b5ba74"
meta-browser =
"firefox-52.1.2esr-2:c79cf6c7811afd2cd167e8967e3c29b1e797371e"
meta-ti = "master:872d418f6e503dea66e3533f43e7a17618183982"
Initialising tasks: 100%
||
Time: 0:00:08
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: automake-native-1.15-r0 do_compile: oe_runmake failed
ERROR: automake-native-1.15-r0 do_compile: Function failed: do_compile (log
file is located at
/home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291)
ERROR: Logfile of failure stored in:
/home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: Using icecc
| NOTE: make -j 10
| ERROR: oe_runmake failed
| : && /home/bianchi77/poky/build/tmp/hosttools/mkdir -p doc && {
PATH='/home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/build/t/wrap:'$PATH
&& export PATH; } && /usr/bin/env perl ../automake-1.15/doc/help2man
--output=doc/automake-1.15.1 automake-1.15
| help2man: can't get `--help' info from automake-1.15
What OS do you run on build machine ?
if its archlinux then apply this patch to automake
https://gist.github.com/xywei/03b546054f0d2e2f76c5ac530c88268a
otherwise if its centos7 then install
yum install perl-Thread-Queue
| Try `--no-discard-stderr' if option outputs to stderr
| Makefile:3687: recipe for target 'doc/automake-1.15.1' failed
| make: *** [doc/automake-1.15.1] Error 255
| ERROR: Function failed: do_compile (log file is located at
/home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291)
ERROR: Task
(virtual:native:/home/bianchi77/poky/meta/recipes-devtools/automake/automake_1.15.bb:do_compile)
failed with exit code '1'
NOTE: Tasks Summary: Attempted 845 tasks of which 844 didn't need to be
rerun and 1 failed.
Summary: 1 task failed:
virtual:native:/home/bianchi77/poky/meta/recipes-devtools/automake/automake_1.15.bb:do_compile
Summary: There were 4 WARNING messages shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
bianchi77@bianchi77-HP-Pavilion-dv6-Notebook-PC:~/poky/build$
How can I fix that automake error ?
I tried to run bitbake core-image-minimal for it.
Thanks,
On 31/07/17 21:26, Burton, Ross wrote:
Then the branch you checked out. git branch will tell you.
Ross
On 31 July 2017 at 14:17, Riko Ho <antonius.r...@gmail.com> wrote:
Git clone ...
On Jul 31, 2017 9:16 PM, "Burton, Ross" <ross.bur...@intel.com> wrote:
How did you get poky?
Ross
On 31 July 2017 at 14:14, Riko Ho <antonius.r...@gmail.com> wrote:
How can I see my branch?
On Jul 31, 2017 9:12 PM, "Burton, Ross" <ross.bur...@intel.com> wrote:
On 31 July 2017 at 03:33, Riko Ho <antonius.r...@gmail.com> wrote:
Is my auto make disabled with icecc ?
How to make it enable ? thanks.
That's just a debug message.
| help2man: can't get `--help' info from automake-1.15
| Try `--no-discard-stderr' if option outputs to stderr
| Makefile:3687: recipe for target 'doc/automake-1.15.1' failed
That's the error your hitting.
I think you need to update to the latest commit for the branch you're
on, there was a problem with modern perl in help2man. What release/branch
are you using?
Ross
--
/***/
Sent by Ubuntu LTS 16.04,
Kind regards,
Riko Ho
/***/
--
___
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
--
/***/
Sent by Ubuntu LTS 16.04,
Kind regards,
Riko Ho
/***/
--
*
/***/
Sent by Ubuntu LTS 16.04,
Kind regards,
Riko Ho
/***/
*
--
___
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] DEBUG: automake-native: class native found in blacklist, disable icecc ?
Dear Yocto Team Member,
I'm building with Ubuntu 16
On 02/08/17 14:31, Khem Raj wrote:
On Tue, Aug 1, 2017 at 11:18 PM, Riko Ho <antonius.r...@gmail.com> wrote:
Dear Yocto Team Member,
That's the branch :
==
meta-poky
meta-yocto-bsp= "pyro:e5aa1ac23669a45491de9ecffac491c01e70203f"
openembedded-core = "master:2fd0757ae7fd63bc93a4ce8579c6ba0cdbb4c1cd"
meta-openembedded
meta-oe
meta-xfce
meta-gnome
meta-python
meta-multimedia
meta-networking = "master:b063789560bfb9c60a7a15277b5b3a9839b5ba74"
meta-browser =
"firefox-52.1.2esr-2:c79cf6c7811afd2cd167e8967e3c29b1e797371e"
meta-ti = "master:872d418f6e503dea66e3533f43e7a17618183982"
Initialising tasks: 100%
||
Time: 0:00:08
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: automake-native-1.15-r0 do_compile: oe_runmake failed
ERROR: automake-native-1.15-r0 do_compile: Function failed: do_compile (log
file is located at
/home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291)
ERROR: Logfile of failure stored in:
/home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: Using icecc
| NOTE: make -j 10
| ERROR: oe_runmake failed
| : && /home/bianchi77/poky/build/tmp/hosttools/mkdir -p doc && {
PATH='/home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/build/t/wrap:'$PATH
&& export PATH; } && /usr/bin/env perl ../automake-1.15/doc/help2man
--output=doc/automake-1.15.1 automake-1.15
| help2man: can't get `--help' info from automake-1.15
What OS do you run on build machine ?
if its archlinux then apply this patch to automake
https://gist.github.com/xywei/03b546054f0d2e2f76c5ac530c88268a
otherwise if its centos7 then install
yum install perl-Thread-Queue
| Try `--no-discard-stderr' if option outputs to stderr
| Makefile:3687: recipe for target 'doc/automake-1.15.1' failed
| make: *** [doc/automake-1.15.1] Error 255
| ERROR: Function failed: do_compile (log file is located at
/home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291)
ERROR: Task
(virtual:native:/home/bianchi77/poky/meta/recipes-devtools/automake/automake_1.15.bb:do_compile)
failed with exit code '1'
NOTE: Tasks Summary: Attempted 845 tasks of which 844 didn't need to be
rerun and 1 failed.
Summary: 1 task failed:
virtual:native:/home/bianchi77/poky/meta/recipes-devtools/automake/automake_1.15.bb:do_compile
Summary: There were 4 WARNING messages shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
bianchi77@bianchi77-HP-Pavilion-dv6-Notebook-PC:~/poky/build$
How can I fix that automake error ?
I tried to run bitbake core-image-minimal for it.
Thanks,
On 31/07/17 21:26, Burton, Ross wrote:
Then the branch you checked out. git branch will tell you.
Ross
On 31 July 2017 at 14:17, Riko Ho <antonius.r...@gmail.com> wrote:
Git clone ...
On Jul 31, 2017 9:16 PM, "Burton, Ross" <ross.bur...@intel.com> wrote:
How did you get poky?
Ross
On 31 July 2017 at 14:14, Riko Ho <antonius.r...@gmail.com> wrote:
How can I see my branch?
On Jul 31, 2017 9:12 PM, "Burton, Ross" <ross.bur...@intel.com> wrote:
On 31 July 2017 at 03:33, Riko Ho <antonius.r...@gmail.com> wrote:
Is my auto make disabled with icecc ?
How to make it enable ? thanks.
That's just a debug message.
| help2man: can't get `--help' info from automake-1.15
| Try `--no-discard-stderr' if option outputs to stderr
| Makefile:3687: recipe for target 'doc/automake-1.15.1' failed
That's the error your hitting.
I think you need to update to the latest commit for the branch you're
on, there was a problem with modern perl in help2man. What release/branch
are you using?
Ross
--
/***/
Sent by Ubuntu LTS 16.04,
Kind regards,
Riko Ho
/***/
--
___
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
--
*
/***/
Sent by Ubuntu LTS 16.04,
Kind regards,
Riko Ho
/***/
*
--
___
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] DEBUG: automake-native: class native found in blacklist, disable icecc ?
Dear Yocto Team Member,
That's the branch :
==
*meta-poky **
**meta-yocto-bsp= "pyro:e5aa1ac23669a45491de9ecffac491c01e70203f"*
openembedded-core = "master:2fd0757ae7fd63bc93a4ce8579c6ba0cdbb4c1cd"
meta-openembedded
meta-oe
meta-xfce
meta-gnome
meta-python
meta-multimedia
meta-networking = "master:b063789560bfb9c60a7a15277b5b3a9839b5ba74"
meta-browser =
"firefox-52.1.2esr-2:c79cf6c7811afd2cd167e8967e3c29b1e797371e"
meta-ti = "master:872d418f6e503dea66e3533f43e7a17618183982"
Initialising tasks: 100%
||
Time: 0:00:08
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: automake-native-1.15-r0 do_compile: oe_runmake failed
ERROR: automake-native-1.15-r0 do_compile: Function failed: do_compile
(log file is located at
/home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291)
ERROR: Logfile of failure stored in:
/home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: Using icecc
| NOTE: make -j 10
| ERROR: oe_runmake failed
| : && /home/bianchi77/poky/build/tmp/hosttools/mkdir -p doc && {
PATH='/home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/build/t/wrap:'$PATH
&& export PATH; } && /usr/bin/env perl ../automake-1.15/doc/help2man
--output=doc/automake-1.15.1 automake-1.15
| help2man: can't get `--help' info from automake-1.15
| Try `--no-discard-stderr' if option outputs to stderr
| Makefile:3687: recipe for target 'doc/automake-1.15.1' failed
| make: *** [doc/automake-1.15.1] Error 255
| ERROR: Function failed: do_compile (log file is located at
/home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.9291)
ERROR: Task
(virtual:native:/home/bianchi77/poky/meta/recipes-devtools/automake/automake_1.15.bb:do_compile)
failed with exit code '1'
NOTE: Tasks Summary: Attempted 845 tasks of which 844 didn't need to be
rerun and 1 failed.
Summary: 1 task failed:
virtual:native:/home/bianchi77/poky/meta/recipes-devtools/automake/automake_1.15.bb:do_compile
Summary: There were 4 WARNING messages shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
bianchi77@bianchi77-HP-Pavilion-dv6-Notebook-PC:~/poky/build$
How can I fix that automake error ?
I tried to run bitbake core-image-minimal for it.
Thanks,
On 31/07/17 21:26, Burton, Ross wrote:
Then the branch you checked out. git branch will tell you.
Ross
On 31 July 2017 at 14:17, Riko Ho <antonius.r...@gmail.com
<mailto:antonius.r...@gmail.com>> wrote:
Git clone ...
On Jul 31, 2017 9:16 PM, "Burton, Ross" <ross.bur...@intel.com
<mailto:ross.bur...@intel.com>> wrote:
How did you get poky?
Ross
On 31 July 2017 at 14:14, Riko Ho <antonius.r...@gmail.com
<mailto:antonius.r...@gmail.com>> wrote:
How can I see my branch?
On Jul 31, 2017 9:12 PM, "Burton, Ross"
<ross.bur...@intel.com <mailto:ross.bur...@intel.com>> wrote:
On 31 July 2017 at 03:33, Riko Ho
<antonius.r...@gmail.com
<mailto:antonius.r...@gmail.com>> wrote:
Is my auto make disabled with icecc ?
How to make it enable ? thanks.
That's just a debug message.
> | help2man: can't get `--help' info from automake-1.15
> | Try `--no-discard-stderr' if option outputs to stderr
> | Makefile:3687: recipe for target
'doc/automake-1.15.1' failed
That's the error your hitting.
I think you need to update to the latest commit for
the branch you're on, there was a problem with modern
perl in help2man. What release/branch are you using?
Ross
--
*
/***/
Sent by Ubuntu LTS 16.04,
Kind regards,
Riko Ho
/***/
*
--
___
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] DEBUG: automake-native: class native found in blacklist, disable icecc ?
Dear Yocto Team Members, Here's what I got : = #:~/poky$ git branch master * pyro How can I fix that problem with modern perl in help2man ? Thanks On 31/07/17 21:26, Burton, Ross wrote: Then the branch you checked out. git branch will tell you. Ross On 31 July 2017 at 14:17, Riko Ho <antonius.r...@gmail.com <mailto:antonius.r...@gmail.com>> wrote: Git clone ... On Jul 31, 2017 9:16 PM, "Burton, Ross" <ross.bur...@intel.com <mailto:ross.bur...@intel.com>> wrote: How did you get poky? Ross On 31 July 2017 at 14:14, Riko Ho <antonius.r...@gmail.com <mailto:antonius.r...@gmail.com>> wrote: How can I see my branch? On Jul 31, 2017 9:12 PM, "Burton, Ross" <ross.bur...@intel.com <mailto:ross.bur...@intel.com>> wrote: On 31 July 2017 at 03:33, Riko Ho <antonius.r...@gmail.com <mailto:antonius.r...@gmail.com>> wrote: Is my auto make disabled with icecc ? How to make it enable ? thanks. That's just a debug message. > | help2man: can't get `--help' info from automake-1.15 > | Try `--no-discard-stderr' if option outputs to stderr > | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed That's the error your hitting. I think you need to update to the latest commit for the branch you're on, there was a problem with modern perl in help2man. What release/branch are you using? Ross -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] DEBUG: automake-native: class native found in blacklist, disable icecc ?
I forgot which one? How can I update?thx https://www.yoctoproject.org/downloads/yocto-project On Jul 31, 2017 9:17 PM, "Riko Ho" <antonius.r...@gmail.com> wrote: > Git clone ... > On Jul 31, 2017 9:16 PM, "Burton, Ross" <ross.bur...@intel.com> wrote: > >> How did you get poky? >> >> Ross >> >> On 31 July 2017 at 14:14, Riko Ho <antonius.r...@gmail.com> wrote: >> >>> How can I see my branch? >>> On Jul 31, 2017 9:12 PM, "Burton, Ross" <ross.bur...@intel.com> wrote: >>> >>>> On 31 July 2017 at 03:33, Riko Ho <antonius.r...@gmail.com> wrote: >>>> >>>>> Is my auto make disabled with icecc ? >>>>> >>>>> How to make it enable ? thanks. >>>>> >>>> >>>> That's just a debug message. >>>> >>>> > | help2man: can't get `--help' info from automake-1.15 >>>> > | Try `--no-discard-stderr' if option outputs to stderr >>>> > | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed >>>> >>>> >>>> That's the error your hitting. >>>> >>>> I think you need to update to the latest commit for the branch you're >>>> on, there was a problem with modern perl in help2man. What release/branch >>>> are you using? >>>> >>>> Ross >>>> >>> >> -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] DEBUG: automake-native: class native found in blacklist, disable icecc ?
Git clone ... On Jul 31, 2017 9:16 PM, "Burton, Ross" <ross.bur...@intel.com> wrote: > How did you get poky? > > Ross > > On 31 July 2017 at 14:14, Riko Ho <antonius.r...@gmail.com> wrote: > >> How can I see my branch? >> On Jul 31, 2017 9:12 PM, "Burton, Ross" <ross.bur...@intel.com> wrote: >> >>> On 31 July 2017 at 03:33, Riko Ho <antonius.r...@gmail.com> wrote: >>> >>>> Is my auto make disabled with icecc ? >>>> >>>> How to make it enable ? thanks. >>>> >>> >>> That's just a debug message. >>> >>> > | help2man: can't get `--help' info from automake-1.15 >>> > | Try `--no-discard-stderr' if option outputs to stderr >>> > | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed >>> >>> >>> That's the error your hitting. >>> >>> I think you need to update to the latest commit for the branch you're >>> on, there was a problem with modern perl in help2man. What release/branch >>> are you using? >>> >>> Ross >>> >> > -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] DEBUG: automake-native: class native found in blacklist, disable icecc ?
How can I see my branch? On Jul 31, 2017 9:12 PM, "Burton, Ross" <ross.bur...@intel.com> wrote: > On 31 July 2017 at 03:33, Riko Ho <antonius.r...@gmail.com> wrote: > >> Is my auto make disabled with icecc ? >> >> How to make it enable ? thanks. >> > > That's just a debug message. > > > | help2man: can't get `--help' info from automake-1.15 > > | Try `--no-discard-stderr' if option outputs to stderr > > | Makefile:3687: recipe for target 'doc/automake-1.15.1' failed > > > That's the error your hitting. > > I think you need to update to the latest commit for the branch you're on, > there was a problem with modern perl in help2man. What release/branch are > you using? > > Ross > -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] DEBUG: automake-native: class native found in blacklist, disable icecc ?
Dear Yocto Team Member,
I tried
#:~/poky/build$ bitbake core-image-minimal
Is my auto make disabled with icecc ?
How to make it enable ? thanks.
Here's the messages:
==
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: automake-native-1.15-r0 do_compile: oe_runmake failed
ERROR: automake-native-1.15-r0 do_compile: Function failed: do_compile
(log file is located at
/home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.7351)
ERROR: Logfile of failure stored in:
/home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.7351
Log data follows:
| DEBUG: automake-native: class native found in blacklist, disable icecc
| DEBUG: automake-native: class native found in blacklist, disable icecc
| DEBUG: automake-native: class native found in blacklist, disable icecc
| DEBUG: Executing shell function do_compile
| NOTE: make -j 10
| ERROR: oe_runmake failed
| : && /home/bianchi77/poky/build/tmp/hosttools/mkdir -p doc && {
PATH='/home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/build/t/wrap:'$PATH
&& export PATH; } && /usr/bin/env perl ../automake-1.15/doc/help2man
--output=doc/automake-1.15.1 automake-1.15
| help2man: can't get `--help' info from automake-1.15
| Try `--no-discard-stderr' if option outputs to stderr
| Makefile:3687: recipe for target 'doc/automake-1.15.1' failed
| make: *** [doc/automake-1.15.1] Error 255
| ERROR: Function failed: do_compile (log file is located at
/home/bianchi77/poky/build/tmp/work/x86_64-linux/automake-native/1.15-r0/temp/log.do_compile.7351)
ERROR: Task
(virtual:native:/home/bianchi77/poky/meta/recipes-devtools/automake/automake_1.15.bb:do_compile)
failed with exit code '1'
NOTE: Tasks Summary: Attempted 230 tasks of which 194 didn't need to be
rerun and 1 failed.
Summary: 1 task failed:
virtual:native:/home/bianchi77/poky/meta/recipes-devtools/automake/automake_1.15.bb:do_compile
Summary: There were 4 WARNING messages shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
--
*
/***/
Sent by Ubuntu LTS 16.04,
Kind regards,
Riko Ho
/***/
*
--
___
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
[yocto] Icecc configuration on ubuntu ?
Dear Yocto Team Member, I've been reading : https://www.openembedded.org/wiki/Using_IceCC on this part : ... use icecc service provided by your distribution (e.g. in ubuntu set ICECC_SCHEDULER_HOST in /etc/icecc/icecc.conf and enable START_ICECC in /etc/default/icecc) ... What should I fill with this configuration ? === # ICECC_SCHEDULER_HOST="" ICECC_SCHEDULER_HOST="" === Is it my Host Ip Address or my hostname ? Thank you, ** * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] Icecc configuration on mpich ?
Dear Yocto Team Member, I've followed : https://lists.yoctoproject.org/pipermail/yocto/2012-August/008757.html and trying to do bitbake but got : DEBUG: automake-native: class native found in blacklist, disable icecc any work around it ? thanks On 28/07/17 14:36, Josef Holzmayr wrote: On 28.07.2017 08:30, Riko Ho wrote: but have no idea on how to use it yet ? This usually is helped by reading the manual. Or the links that I already provided. As a last hint for now, let me rephrase and simplify the short description from icecc itself: icecc is a daemon that can accept compile jobs over the network. That should tell you that you probably don't use it directly, right? -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] Icecc configuration on mpich ?
Ok, thanks for the hints, I'll make some experiments On 28/07/17 14:36, Josef Holzmayr wrote: On 28.07.2017 08:30, Riko Ho wrote: but have no idea on how to use it yet ? This usually is helped by reading the manual. Or the links that I already provided. As a last hint for now, let me rephrase and simplify the short description from icecc itself: icecc is a daemon that can accept compile jobs over the network. That should tell you that you probably don't use it directly, right? -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] Icecc configuration on mpich ?
I've installed on my system, but have no idea on how to use it yet ? Usage: icecc [compiler] [compile options] -o OBJECT -c SOURCE icecc --build-native [compilertype] [file...] icecc --help Options: --help explain usage and exit --version show version and exit --build-native create icecc environment Environment Variables: ICECC if set to "no", just exec the real compiler ICECC_VERSION use a specific icecc environment, see icecc-create-env ICECC_DEBUG[info | warnings | debug] sets verboseness of icecream client. ICECC_LOGFILE if set, additional debug information is logged to the specified file ICECC_REPEAT_RATE the number of jobs out of 1000 that should be compiled on multiple hosts to ensure that they're producing the same output. The default is 0. ICECC_PREFERRED_HOST overrides scheduler decisions if set. ICECC_CC set C compiler name (default gcc). ICECC_CXX set C++ compiler name (default g++). ICECC_CLANG_REMOTE_CPP set to 1 or 0 to override remote precompiling with clang (requires clang -frewrite-includes option). ICECC_IGNORE_UNVERIFIEDif set, hosts where environment cannot be verified are not used. ICECC_EXTRAFILES additi On 28/07/17 14:22, Josef Holzmayr wrote: On 28.07.2017 08:17, Riko Ho wrote: icecc.bbclass on Yocto manual, but I'm not sure on how to use it yet ? to me, the description in https://stackoverflow.com/questions/14472175/distributed-compile-with-bitbake looks pretty good - for the bitbake side of things. Setting up icecc, again, is distribution specific (according to themselves, see https://github.com/icecc/icecream/blob/master/README.md#installation). -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] Icecc configuration on mpich ?
Probably this one will help the way ? http://manpages.ubuntu.com/manpages/xenial/man7/icecream.7.html On 28/07/17 14:22, Josef Holzmayr wrote: On 28.07.2017 08:17, Riko Ho wrote: icecc.bbclass on Yocto manual, but I'm not sure on how to use it yet ? to me, the description in https://stackoverflow.com/questions/14472175/distributed-compile-with-bitbake looks pretty good - for the bitbake side of things. Setting up icecc, again, is distribution specific (according to themselves, see https://github.com/icecc/icecream/blob/master/README.md#installation). -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] Icecc configuration on mpich ?
Dear Yocto Team Member, Yes, I'm confuse about those, And reading about Icecc now. Icecc is the right way for distributing compilation for my bitbake, correct me ? I read about : 26.50. icecc.bbclass on Yocto manual, but I'm not sure on how to use it yet ? Thanks On 28/07/17 14:13, Josef Holzmayr wrote: On 28.07.2017 07:56, Riko Ho wrote: How can I port it to MPICH ? Easy, just do a complete rewrite of the compiler infrastructure :-) Or did you actually mean "how can I install" instead of "how can I port"? In that case, the answer is "Not at all." Seriously, icecc/distcc have absolutely nothing to do with mpich(or any other comparable mpi/hpc framework). You are mixing up an awful lot of buzzwords, what is running where and doing what. If you want to speed up bitbake by using multiple boxes, icecc is your choice. Follow its own installation procedures for getting started. mpich seems to be a framwork/infrastructure for hpc applications, which is something completely different. And generally, all this shbang is not worth the effort. Are you really running multiple hours of builds per day? Would shaving off a couple of percent from the compilation provide any gain? Mind, its only the compilation that can be distributed. Not the whole rest that actually makes up the magic of a bitbake build. -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] Icecc configuration on mpich ?
Dear Yocto Team Member, I read about, https://lists.yoctoproject.org/pipermail/yocto/2012-August/008757.html, How can I port it to MPICH ? Thanks -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] Mpich and yocto ?
Dear Yocto Team Member, I tried to compile icecream on the master node, but here's the messages I got, any ideas ? = Making install in services make[1]: Entering directory '/home/bianchi77/icecream/services' make[2]: Entering directory '/home/bianchi77/icecream/services' /bin/mkdir -p '/usr/local/lib' /bin/bash ../libtool --mode=install /usr/bin/install -c libicecc.la '/usr/local/lib' libtool: install: /usr/bin/install -c .libs/libicecc.lai /usr/local/lib/libicecc.la /usr/bin/install: cannot create regular file '/usr/local/lib/libicecc.la': Permission denied Makefile:428: recipe for target 'install-libLTLIBRARIES' failed make[2]: *** [install-libLTLIBRARIES] Error 1 make[2]: Leaving directory '/home/bianchi77/icecream/services' Makefile:721: recipe for target 'install-am' failed make[1]: *** [install-am] Error 2 make[1]: Leaving directory '/home/bianchi77/icecream/services' Makefile:421: recipe for target 'install-recursive' failed make: *** [install-recursive] Error 1 == Thanks On 27/07/17 09:10, Randy MacLeod wrote: On 2017-07-26 08:08 PM, Riko Ho wrote: Dear Yocto Team Member, The cluster is using Ubuntu. I haven't checked all the packages on the other computer. I will. My goal is getting more hardrive space and compiling speed. How can I relate bitbake with mpicc or other compilers needed by yocto (arm-linux-gcc, gcc, etc)? Do you mean that you want to do part of the build using each node in the cluster? That's possible now using distcc/icecream (https://github.com/icecc/icecream ) but I haven't done it in years as explained below. Oh, there's a Stack Overflow entry for YP+distcc/icecream: https://stackoverflow.com/questions/14472175/distributed-compile-with-bitbake and distcc is mentioned in the docs: http://www.yoctoproject.org/docs/2.3/dev-manual/dev-manual.html Anyway, this just distributes the compilation so: - build management, - recipe download, unpack, patch, configuring and packaging, - linking, etc are still done centrally. There are plans to improve the bitbake task manager so that, with the recipe specific sysroot work that has been done in 2.2, we'd be able to farm out all of the stages of a package's build to individual nodes in a cluster: https://bugzilla.yoctoproject.org/show_bug.cgi?id=10684 I don't know if that work is a priority for the fall 2.4 release. Note that depending on your workload, inter-recipe dependencies and the long time taken to run configure for autotools-based packages is the bottleneck. Therefore, buying a high-end ( >= 16+16 core ) system with lots (64GB+) RAM and a good IO sub-system results in core-image-minimal building quickly, certainly under 40 minutes. https://wiki.yoctoproject.org/wiki/Build_Performance Also for repeated builds by one or more developers, sstate-cache is a huge speed-up with some cost in scripts and people to manage it. I've wondered if anyone has played with bitbake on an OS that is known as a single-system image: https://en.wikipedia.org/wiki/Single_system_image On these systems, jobs are transparently moved from the master-node to idle nodes in the cluster by the operating system. That would be an interesting academic exercise but it wouldn't be useful in practice since such OSs are not generally used as far as I know at least. I look forward to hearing what your goals and plans are. ../Randy I have tested a small code with mpicc and the cluster do the job. Thanks for the attention. On Jul 27, 2017 3:23 AM, "Randy MacLeod" <randy.macl...@windriver.com <mailto:randy.macl...@windriver.com>> wrote: > > On 2017-07-26 02:09 AM, Riko Ho wrote: >> >> How can we do that ? >> >> bitbake in which node ? I don't understand ? >> >> >> On 26/07/17 13:57, Josef Holzmayr wrote: >>> >>> Hi >>> >>> On 26.07.2017 05:12, Riko Ho wrote: >>>> >>>> Does anyone know on how to run poky on mpich cluster ? > > > That's a rather ambiguous question. > > What OS/Distro is the mpich cluster running? > Have you installed the packages that are required on the host: >see: "The Build Host Packages" here: > > http://www.yoctoproject.org/docs/2.3/yocto-project-qs/yocto-project-qs.html > > What do you hope to achieve using bitbake? > > >>> >>> As far as I can see, MPICH is a userland library, basically. So it would be the other way round, you could probably run a mpich application on a number of nodes that run some OE/Poky thing. >>> >>> Greetz > > > There is an mpich recipe here: > http://layers.openembedded.org/layerindex/recipe/33348/ > > but again, it's not clear what your ultimate goal is. > > ../Randy > >> >> -- >> * >> >> >> /***/ >> Sent by Ubuntu
Re: [yocto] Mpich and yocto ?
Dear Yocto Team Member, Thanks for the reply, So : "YP+distcc/icecream" is equal to MpichCluster ? or that one is inside MpichCluster, I have tested : https://help.ubuntu.com/community/MpichCluster I don't have a fancy systems as you said below, but I have a spare motherboards, memories and hard drives for a test on a small cluster, at least making my compilation time faster and get more space. Ok, I'll have a look on those links below and keep posted, thanks. On 27/07/17 09:10, Randy MacLeod wrote: On 2017-07-26 08:08 PM, Riko Ho wrote: Dear Yocto Team Member, The cluster is using Ubuntu. I haven't checked all the packages on the other computer. I will. My goal is getting more hardrive space and compiling speed. How can I relate bitbake with mpicc or other compilers needed by yocto (arm-linux-gcc, gcc, etc)? Do you mean that you want to do part of the build using each node in the cluster? That's possible now using distcc/icecream (https://github.com/icecc/icecream ) but I haven't done it in years as explained below. Oh, there's a Stack Overflow entry for YP+distcc/icecream: https://stackoverflow.com/questions/14472175/distributed-compile-with-bitbake and distcc is mentioned in the docs: http://www.yoctoproject.org/docs/2.3/dev-manual/dev-manual.html Anyway, this just distributes the compilation so: - build management, - recipe download, unpack, patch, configuring and packaging, - linking, etc are still done centrally. There are plans to improve the bitbake task manager so that, with the recipe specific sysroot work that has been done in 2.2, we'd be able to farm out all of the stages of a package's build to individual nodes in a cluster: https://bugzilla.yoctoproject.org/show_bug.cgi?id=10684 I don't know if that work is a priority for the fall 2.4 release. Note that depending on your workload, inter-recipe dependencies and the long time taken to run configure for autotools-based packages is the bottleneck. Therefore, buying a high-end ( >= 16+16 core ) system with lots (64GB+) RAM and a good IO sub-system results in core-image-minimal building quickly, certainly under 40 minutes. https://wiki.yoctoproject.org/wiki/Build_Performance Also for repeated builds by one or more developers, sstate-cache is a huge speed-up with some cost in scripts and people to manage it. I've wondered if anyone has played with bitbake on an OS that is known as a single-system image: https://en.wikipedia.org/wiki/Single_system_image On these systems, jobs are transparently moved from the master-node to idle nodes in the cluster by the operating system. That would be an interesting academic exercise but it wouldn't be useful in practice since such OSs are not generally used as far as I know at least. I look forward to hearing what your goals and plans are. ../Randy I have tested a small code with mpicc and the cluster do the job. Thanks for the attention. On Jul 27, 2017 3:23 AM, "Randy MacLeod" <randy.macl...@windriver.com <mailto:randy.macl...@windriver.com>> wrote: > > On 2017-07-26 02:09 AM, Riko Ho wrote: >> >> How can we do that ? >> >> bitbake in which node ? I don't understand ? >> >> >> On 26/07/17 13:57, Josef Holzmayr wrote: >>> >>> Hi >>> >>> On 26.07.2017 05:12, Riko Ho wrote: >>>> >>>> Does anyone know on how to run poky on mpich cluster ? > > > That's a rather ambiguous question. > > What OS/Distro is the mpich cluster running? > Have you installed the packages that are required on the host: >see: "The Build Host Packages" here: > > http://www.yoctoproject.org/docs/2.3/yocto-project-qs/yocto-project-qs.html > > What do you hope to achieve using bitbake? > > >>> >>> As far as I can see, MPICH is a userland library, basically. So it would be the other way round, you could probably run a mpich application on a number of nodes that run some OE/Poky thing. >>> >>> Greetz > > > There is an mpich recipe here: > http://layers.openembedded.org/layerindex/recipe/33348/ > > but again, it's not clear what your ultimate goal is. > > ../Randy > >> >> -- >> * >> >> >> /***/ >> Sent by Ubuntu LTS 16.04, >> Kind regards, >> Riko Ho >> /***/ >> >> * >> >> > > > -- > # Randy MacLeod. SMTS, Linux, Wind River > Direct: 613.963.1350 | 350 Terry Fox Drive, Suite 200, Ottawa, ON, Canada, K2K 2W5 -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] Mpich and yocto ?
Dear Yocto Team Member, The cluster is using Ubuntu. I haven't checked all the packages on the other computer. I will. My goal is getting more hardrive space and compiling speed. How can I relate bitbake with mpicc or other compilers needed by yocto (arm-linux-gcc, gcc, etc)? I have tested a small code with mpicc and the cluster do the job. Thanks for the attention. On Jul 27, 2017 3:23 AM, "Randy MacLeod" <randy.macl...@windriver.com> wrote: > > On 2017-07-26 02:09 AM, Riko Ho wrote: >> >> How can we do that ? >> >> bitbake in which node ? I don't understand ? >> >> >> On 26/07/17 13:57, Josef Holzmayr wrote: >>> >>> Hi >>> >>> On 26.07.2017 05:12, Riko Ho wrote: >>>> >>>> Does anyone know on how to run poky on mpich cluster ? > > > That's a rather ambiguous question. > > What OS/Distro is the mpich cluster running? > Have you installed the packages that are required on the host: >see: "The Build Host Packages" here: > > http://www.yoctoproject.org/docs/2.3/yocto-project-qs/yocto-project-qs.html > > What do you hope to achieve using bitbake? > > >>> >>> As far as I can see, MPICH is a userland library, basically. So it would be the other way round, you could probably run a mpich application on a number of nodes that run some OE/Poky thing. >>> >>> Greetz > > > There is an mpich recipe here: > http://layers.openembedded.org/layerindex/recipe/33348/ > > but again, it's not clear what your ultimate goal is. > > ../Randy > >> >> -- >> * >> >> >> /***/ >> Sent by Ubuntu LTS 16.04, >> Kind regards, >> Riko Ho >> /***/ >> >> * >> >> > > > -- > # Randy MacLeod. SMTS, Linux, Wind River > Direct: 613.963.1350 | 350 Terry Fox Drive, Suite 200, Ottawa, ON, Canada, K2K 2W5 -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] Mpich and yocto ?
How can we do that ? bitbake in which node ? I don't understand ? On 26/07/17 13:57, Josef Holzmayr wrote: Hi On 26.07.2017 05:12, Riko Ho wrote: Does anyone know on how to run poky on mpich cluster ? As far as I can see, MPICH is a userland library, basically. So it would be the other way round, you could probably run a mpich application on a number of nodes that run some OE/Poky thing. Greetz -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] Mpich and yocto ?
Dear Yocto Member, Does anyone know on how to run poky on mpich cluster ? Thanks, -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] FFplay question ?
Dear Yocto Members, I tried to compile FFplay with FFMpeg, but I can not get it ? What should I change on this code ? Here's on ffmpeg_3.3.bb : === EXTRA_OECONF = " \ --disable-stripping \ --enable-pic \ --enable-shared \ --enable-pthreads \ --enable-ffplay \ " Thank you -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] SPI0 dev loop back = 000 ? why ?
Hello Yocto Team Member, I tried to compile spidev_test on loopback ,but got , why is it ?? I checked all the cable and /dev/spidev1.0, they're all there ?? spi mode: 0 bits per word: 8 max speed: 240 Hz (2400 KHz) 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] /boot/dtbs/4.4.54-ti-r93/am335x-boneblack.dtb
Dear Yocto Team Member, Is it possible that I use this dtb with beagle yocto kernel ? if it is, how to do that ? loading */boot/dtbs/4.4.54-ti-r93/am335x-boneblack.dtb * -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] /poky/meta-browser/recipes-mozilla/firefox/firefox_45.9.0esr.bb =>how to update the newest version ?
When I upgrade poky, will it delete all the configuration I had done? On 04/07/17 17:51, Takuro Ashie wrote: On 2017年07月04日 17:06, Riko Ho wrote: Still in error : | /home/bianchi77/poky/build/tmp/work/cortexa8hf-neon-poky-linux-gnueabi/firefox/52.1.2esr-r0/firefox-52.1.2esr/firefox-build-dir/dist/system_wrappers/pk11pub.h:3:26: fatal error: pk11pub.h: No such file or directory | #include_next | ^ | compilation terminated. I confirmed it. Hmm, there are some issues which prevent using built-in nss & nspr. I can't resolve it soon. It seems that upgrading poky is a easier way to build firefox if it's acceptable for you. -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] Kernel image and dts
Hello Yocto Team Member, I have a question related with *.dtbo, Can I use *.dtbo for beaglebone directly with linux yocto kernel, without using ti mainline kernel ? I want to use SPI port. One example I can read : arch/arm/boot/dts/sun7i-a20-pcduino3.dts, where can I find those source files on yocto ? ==> build/tmp/ .?? Thanks -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] /poky/meta-browser/recipes-mozilla/firefox/firefox_45.9.0esr.bb =>how to update the newest version ?
Still in error : | /home/bianchi77/poky/build/tmp/work/cortexa8hf-neon-poky-linux-gnueabi/firefox/52.1.2esr-r0/firefox-52.1.2esr/firefox-build-dir/dist/system_wrappers/pk11pub.h:3:26: fatal error: pk11pub.h: No such file or directory | #include_next | ^ | compilation terminated. On 04/07/17 15:03, Takuro Ashie wrote: > so which one is the right one ? :) This is the correct one: ac_add_options --with-system-nss ac_add_options --with-system-nspr Regards, -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] /poky/meta-browser/recipes-mozilla/firefox/firefox_45.9.0esr.bb =>how to update the newest version ?
It's compiling now.. On 04/07/17 15:03, Takuro Ashie wrote: > so which one is the right one ? :) This is the correct one: ac_add_options --with-system-nss ac_add_options --with-system-nspr Regards, -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] /poky/meta-browser/recipes-mozilla/firefox/firefox_45.9.0esr.bb =>how to update the newest version ?
These lines : # System libraries #ac_add_options --with-system-nss #comment out for nss bug #ac_add_options --with-system-nspr Let me try... On 04/07/17 15:03, Takuro Ashie wrote: > so which one is the right one ? :) This is the correct one: ac_add_options --with-system-nss ac_add_options --with-system-nspr Regards, -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] /poky/meta-browser/recipes-mozilla/firefox/firefox_45.9.0esr.bb =>how to update the newest version ?
so which one is the right one ? :) On 04/07/17 14:43, Takuro Ashie wrote: ac_add_options --with-system-nss ac_add_options --with-system-jpeg Oops, it's wrong. ac_add_options --with-system-nss ac_add_options --with-system-nspr On 2017年07月04日 15:34, Takuro Ashie wrote: You need latest poky (current master branch is needed). But upgrading poky may also introduce unexpected changes for you. Another solution is using built-in nss & nspr instead of system's one. To use it remove or comment out following lines in your meta-browser/recipes-mozilla/firefox/firefox/mozconfig ac_add_options --with-system-nss ac_add_options --with-system-jpeg Regards, -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] /poky/meta-browser/recipes-mozilla/firefox/firefox_45.9.0esr.bb =>how to update the newest version ?
another bug :
checking for NSS - version >= 3.28.4... no
| configure: error: you don't have NSS installed or your version is too old
| DEBUG:
| DEBUG: #include
| DEBUG: #include
| DEBUG: size_t malloc_usable_size(const void *ptr);
| DEBUG: int main() {
| DEBUG: return malloc_usable_size(0);
| DEBUG: ; return 0; }
| DEBUG: configure:9923: checking for valloc in malloc.h
| DEBUG: configure:9948: checking for valloc in unistd.h
| DEBUG: configure:10103: checking NSPR selection
| DEBUG: configure:10203: checking for nspr-config
| DEBUG: configure:10238: checking for NSPR - version >= 4.13.1
| DEBUG: configure:10314:
/home/bianchi77/poky/build/tmp/work/cortexa8hf-neon-poky-linux-gnueabi/firefox/52.1.2esr-r0/recipe-sysroot-native/usr/bin/arm-poky-linux-gnueabi/arm-poky-linux-gnueabi-gcc
-march=armv7-a -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a8
--sysroot=/home/bianchi77/poky/build/tmp/work/cortexa8hf-neon-poky-linux-gnueabi/firefox/52.1.2esr-r0/recipe-sysroot
-std=gnu99 -c -fno-lifetime-dse -Os -fsigned-char -fno-strict-aliasing
-fno-strict-aliasing -fno-math-errno -pthread conftest.c 1>&5| DEBUG:
configure:10333:
/home/bianchi77/poky/build/tmp/work/cortexa8hf-neon-poky-linux-gnueabi/firefox/52.1.2esr-r0/recipe-sysroot-native/usr/bin/arm-poky-linux-gnueabi/arm-poky-linux-gnueabi-gcc
-march=armv7-a -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a8
--sysroot=/home/bianchi77/poky/build/tmp/work/cortexa8hf-neon-poky-linux-gnueabi/firefox/52.1.2esr-r0/recipe-sysroot
-std=gnu99 -c -fno-lifetime-dse -Os -fsigned-char -fno-strict-aliasing
-fno-strict-aliasing -fno-math-errno -pthread conftest.c 1>&5
| DEBUG: configure:10381:
/home/bianchi77/poky/build/tmp/work/cortexa8hf-neon-poky-linux-gnueabi/firefox/52.1.2esr-r0/recipe-sysroot-native/usr/bin/arm-poky-linux-gnueabi/arm-poky-linux-gnueabi-gcc
-march=armv7-a -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a8
--sysroot=/home/bianchi77/poky/build/tmp/work/cortexa8hf-neon-poky-linux-gnueabi/firefox/52.1.2esr-r0/recipe-sysroot
-std=gnu99 -c -fno-lifetime-dse -Os -fsigned-char -fno-strict-aliasing
-fno-strict-aliasing -fno-math-errno -pthread conftest.c 1>&5
| DEBUG: configure:10420: checking for libevent
| DEBUG: configure:10427: checking MOZ_LIBEVENT_CFLAGS
| DEBUG: configure:10432: checking MOZ_LIBEVENT_LIBS
| DEBUG: configure:10605: checking for nss-config
| DEBUG: configure:10640: checking for NSS - version >= 3.28.4
| DEBUG: configure: error: you don't have NSS installed or your version
is too old
| ERROR: old-configure failed
| *** Fix above errors and then restart with\
|"make -f client.mk build"
| client.mk:375: recipe for target 'configure' failed
| make: *** [configure] Error 1
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_configure (log file is located at
/home/bianchi77/poky/build/tmp/work/cortexa8hf-neon-poky-linux-gnueabi/firefox/52.1.2esr-r0/temp/log.do_configure.9904)
ERROR: Task
(/home/bianchi77/poky/meta-browser/recipes-mozilla/firefox/firefox_52.1.2esr.bb:do_configure)
failed with exit code '1'
Let me see my NSS
On 04/07/17 13:33, Takuro Ashie wrote:
|HOSTTOOLS += "autoconf2.13"|
--
*
/***/
Sent by Ubuntu LTS 16.04,
Kind regards,
Riko Ho
/***/
*
--
___
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] /poky/meta-browser/recipes-mozilla/firefox/firefox_45.9.0esr.bb =>how to update the newest version ?
Installing now and I'll let you know the result.. On 04/07/17 13:33, Takuro Ashie wrote: Hi. > How to fix it ? thanks. I'm using Ubuntu 16.04 as a host. * Add autoconf2.13 to you system: $ sudo apt install autoconf2.13 * Add the following line to your local.conf if you are using recent poky. If you are using old poky, it's not needed. | HOSTTOOLS += "autoconf2.13" We are now discussing about it to resolve properly: |https://github.com/OSSystems/meta-browser/pull/43#issuecomment-312721620 Regards, On 2017年07月04日 14:16, Riko Ho wrote: I got this error : checking for autoconf... | ERROR: Could not find autoconf 2.13 | *** Fix above errors and then restart with\ |"make -f client.mk build" | client.mk:375: recipe for target 'configure' failed | make: *** [configure] Error 1 | WARNING: exit code 1 from a shell command. | ERROR: Function failed: do_configure How to fix it ? thanks. I'm using Ubuntu 16.04 as a host. On 03/07/17 15:32, Takuro Ashie wrote: Hi. How can I update to the latest firefox version? /poky/meta-browser/recipes-mozilla/firefox/firefox_45.9.0esr.bb I'm now trying to upgrade it to 52ESR: https://github.com/OSSystems/meta-browser/pull/43 It almost done but seems have a problem. Drawing tabs may be broken. I'm now investigating it. If you are interesting it, please try the following branch and report issues: https://github.com/ashie/meta-browser/tree/firefox-52.1.2esr-2 In addition, we are also trying to support * Wayland * OpenMAX * EGL They are already enabled in the following branch but not stable yet: https://github.com/mozilla-japan/meta-browser/tree/firefox-52.2esr Regards, Takuro Ashie <as...@clear-code.com> On 2017年07月01日 15:03, Riko Ho wrote: Hello Everyone, How can I update to the latest firefox version? /poky/meta-browser/recipes-mozilla/firefox/firefox_45.9.0esr.bb Thanks -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] /poky/meta-browser/recipes-mozilla/firefox/firefox_45.9.0esr.bb =>how to update the newest version ?
I got this error : checking for autoconf... | ERROR: Could not find autoconf 2.13 | *** Fix above errors and then restart with\ |"make -f client.mk build" | client.mk:375: recipe for target 'configure' failed | make: *** [configure] Error 1 | WARNING: exit code 1 from a shell command. | ERROR: Function failed: do_configure How to fix it ? thanks. I'm using Ubuntu 16.04 as a host. On 03/07/17 15:32, Takuro Ashie wrote: Hi. How can I update to the latest firefox version? /poky/meta-browser/recipes-mozilla/firefox/firefox_45.9.0esr.bb I'm now trying to upgrade it to 52ESR: https://github.com/OSSystems/meta-browser/pull/43 It almost done but seems have a problem. Drawing tabs may be broken. I'm now investigating it. If you are interesting it, please try the following branch and report issues: https://github.com/ashie/meta-browser/tree/firefox-52.1.2esr-2 In addition, we are also trying to support * Wayland * OpenMAX * EGL They are already enabled in the following branch but not stable yet: https://github.com/mozilla-japan/meta-browser/tree/firefox-52.2esr Regards, Takuro Ashie <as...@clear-code.com> On 2017年07月01日 15:03, Riko Ho wrote: Hello Everyone, How can I update to the latest firefox version? /poky/meta-browser/recipes-mozilla/firefox/firefox_45.9.0esr.bb Thanks -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] /poky/meta-browser/recipes-mozilla/firefox/firefox_45.9.0esr.bb =>how to update the newest version ?
Hi, How can I update file into my computer ? Thanks On 03/07/17 15:32, Takuro Ashie wrote: Hi. How can I update to the latest firefox version? /poky/meta-browser/recipes-mozilla/firefox/firefox_45.9.0esr.bb I'm now trying to upgrade it to 52ESR: https://github.com/OSSystems/meta-browser/pull/43 It almost done but seems have a problem. Drawing tabs may be broken. I'm now investigating it. If you are interesting it, please try the following branch and report issues: https://github.com/ashie/meta-browser/tree/firefox-52.1.2esr-2 In addition, we are also trying to support * Wayland * OpenMAX * EGL They are already enabled in the following branch but not stable yet: https://github.com/mozilla-japan/meta-browser/tree/firefox-52.2esr Regards, Takuro Ashie <as...@clear-code.com> On 2017年07月01日 15:03, Riko Ho wrote: Hello Everyone, How can I update to the latest firefox version? /poky/meta-browser/recipes-mozilla/firefox/firefox_45.9.0esr.bb Thanks -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] /poky/meta-browser/recipes-mozilla/firefox/firefox_45.9.0esr.bb =>how to update the newest version ?
Hello Everyone, How can I update to the latest firefox version? /poky/meta-browser/recipes-mozilla/firefox/firefox_45.9.0esr.bb Thanks -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] internet radio
How to install mplayer on xfce ? I got no luck until now. On 23/06/17 21:42, Khem Raj wrote: On Fri, Jun 23, 2017 at 1:18 AM, Riko Ho <antonius.r...@gmail.com> wrote: Hello everyone, What do you suggest me using for internet radio / playing multimedia on GUI ? Which recipe is suitable for it ? may be you could use mplayer or kodi Thanks -- /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- * /***/ Sent by Ubuntu LTS 16.04, Kind regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] internet radio
Hi, I tried to install mplayer and I got this message : Loading cache: 100% |#| Time: 0:00:01 Loaded 2794 entries from dependency cache. Parsing recipes: 100% |###| Time: 0:00:01 Parsing of 2041 .bb files complete (2040 cached, 1 parsed). 2794 targets, 208 skipped, 0 masked, 0 errors. WARNING: No bb files matched BBFILE_PATTERN_openembedded-layer '^/home/bianchi77/poky/meta-openembedded/meta-oe/' WARNING: No bb files matched BBFILE_PATTERN_meta-python '^/home/bianchi77/poky/meta-openembedded/meta-python/' WARNING: No bb files matched BBFILE_PATTERN_multimedia-layer '^/home/bianchi77/poky/meta-openembedded/meta-multimedia/' NOTE: Resolving any missing task queue dependencies ERROR: Nothing RPROVIDES 'mplayer' (but /home/bianchi77/poky/meta-openembedded/meta-xfce/recipes-core/images/core-image-minimal-xfce-browser.bb RDEPENDS on or otherwise requires it) NOTE: Runtime target 'mplayer' is unbuildable, removing... Missing or unbuildable dependency chain was: ['mplayer'] ERROR: Required build target 'core-image-minimal-xfce-browser' has no buildable providers. Missing or unbuildable dependency chain was: ['core-image-minimal-xfce-browser', 'mplayer'] What do I miss here ? bblayers : BBLAYERS ?= " \ /home/bianchi77/poky/meta \ /home/bianchi77/poky/meta-poky \ /home/bianchi77/poky/meta-yocto-bsp \ /home/bianchi77/poky/openembedded-core \ /home/bianchi77/poky/meta-openembedded \ /home/bianchi77/poky/meta-openembedded/meta-oe \ /home/bianchi77/poky/meta-openembedded/meta-xfce \ /home/bianchi77/poky/meta-openembedded/meta-gnome \ /home/bianchi77/poky/meta-openembedded/meta-python \ /home/bianchi77/poky/meta-openembedded/meta-multimedia \ /home/bianchi77/poky/meta-browser \ " and image .bb : IMAGE_INSTALL += "linux-firmware" IMAGE_INSTALL += "mplayer" IMAGE_INSTALL += "strace nano firefox gstreamer" IMAGE_FEATURES += "ssh-server-openssh" On 23/06/17 21:42, Khem Raj wrote: On Fri, Jun 23, 2017 at 1:18 AM, Riko Ho <antonius.r...@gmail.com> wrote: Hello everyone, What do you suggest me using for internet radio / playing multimedia on GUI ? Which recipe is suitable for it ? may be you could use mplayer or kodi Thanks -- /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- * /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] internet radio
and this one ? http://cgit.openembedded.org/meta-openembedded/tree/meta-oe/recipes-multimedia/mplayer is it gui or text based ? On 23/06/17 21:42, Khem Raj wrote: On Fri, Jun 23, 2017 at 1:18 AM, Riko Ho <antonius.r...@gmail.com> wrote: Hello everyone, What do you suggest me using for internet radio / playing multimedia on GUI ? Which recipe is suitable for it ? may be you could use mplayer or kodi Thanks -- /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- * /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] internet radio
This one ? http://layers.openembedded.org/layerindex/branch/master/layer/meta-multimedia/ On 23/06/17 21:42, Khem Raj wrote: On Fri, Jun 23, 2017 at 1:18 AM, Riko Ho <antonius.r...@gmail.com> wrote: Hello everyone, What do you suggest me using for internet radio / playing multimedia on GUI ? Which recipe is suitable for it ? may be you could use mplayer or kodi Thanks -- /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- * /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] Compiling meta-browser ==>chromium ? cleaning ?
it can be compiled and image can be written to the board but chromium got error : /usr/bin/chromium/chrome: error while loading shared libraries: libaccessibility.so: cannot open shared object file: No such file or directory What do I miss here on compiling ? could it be a not complete library on my configuration ? any clues ? thanks On 21/06/17 15:37, Gunnar Andersson wrote: On Wed, 2017-06-21 at 12:42 +0800, Riko Ho wrote: did I put it wrongly ? ... browser/chromium/chromium_54.0.2810.2.bb:7: unparsed line: 'EXTRA_OEGYP_prepend = " -Dcomponent=shared_library Maybe your line break did not use a backslash? It was lost, or just assumed, in Khem's example. See recipe syntax in Yocto manual [1]. Look for the item "Line continuation". HTH - Gunnar [1] http://www.yoctoproject.org/docs/current/mega-manual/mega-manual.html#un derstanding-recipe-syntax -- Gunnar Andersson <ganders...@genivi.org> Development Lead GENIVI Alliance -- * /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] RTL8192EU question ?
Hello Everyone, I tried to connect rev B But I got this message below repeating, usb 1-1.1: This Realtek USB WiFi dongle (0x0bda:0x818b) is untested! usb 1-1.1: Please report results to jes.soren...@gmail.com usb 1-1.1: Vendor: Realtek usb 1-1.1: Product: 802.11n NIC usb 1-1.1: Serial: ��� usb 1-1.1: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes): usb 1-1.1: 00: 29 81 00 7c 01 40 03 00 usb 1-1.1: 08: 40 74 04 50 14 00 00 00 usb 1-1.1: 10: 2e 2e 2e 2e 2e 2e 2e 2e usb 1-1.1: 18: 2e 2e 2e 02 ef ef ff ff usb 1-1.1: 20: ff ff ff ff ff ff ff ff usb 1-1.1: 28: ff ff ff ff ff ff ff ff usb 1-1.1: 30: ff ff ff ff ff ff ff ff usb 1-1.1: 38: ff ff 29 29 29 29 29 29 usb 1-1.1: 40: 2e 2e 2e 2e 2e 02 ef ef usb 1-1.1: 48: ff ff ff ff ff ff ff ff usb 1-1.1: 50: ff ff ff ff ff ff ff ff usb 1-1.1: 58: ff ff ff ff ff ff ff ff usb 1-1.1: 60: ff ff ff ff ff ff ff ff usb 1-1.1: 68: ff ff ff ff ff ff ff ff usb 1-1.1: 70: ff ff ff ff ff ff ff ff usb 1-1.1: 78: ff ff ff ff ff ff ff ff usb 1-1.1: 80: ff ff ff ff ff ff ff ff usb 1-1.1: 88: ff ff ff ff ff ff ff ff usb 1-1.1: 90: ff ff ff ff ff ff ff ff usb 1-1.1: 98: ff ff ff ff ff ff ff ff usb 1-1.1: a0: ff ff ff ff ff ff ff ff usb 1-1.1: a8: ff ff ff ff ff ff ff ff usb 1-1.1: b0: ff ff ff ff ff ff ff ff usb 1-1.1: b8: 20 20 1a 00 00 00 ff ff usb 1-1.1: c0: ff 01 00 10 00 00 00 ff usb 1-1.1: c8: 00 00 ff ff ff ff ff ff usb 1-1.1: d0: da 0b 8b 81 e6 47 02 00 usb 1-1.1: d8: 0b 81 a2 a5 60 09 03 52 usb 1-1.1: e0: 65 61 6c 74 65 6b 0d 03 usb 1-1.1: e8: 38 30 32 2e 31 31 6e 20 usb 1-1.1: f0: 4e 49 43 00 ff ff ff ff usb 1-1.1: f8: ff ff ff ff ff ff ff ff usb 1-1.1: 100: ff ff ff ff ff ff ff ff usb 1-1.1: 108: ff ff ff ff ff ff ff ff usb 1-1.1: 110: ff ff ff ff ff ff ff 0d usb 1-1.1: 118: 03 00 05 00 30 00 00 00 usb 1-1.1: 120: 00 93 ff ff ff ff ff ff usb 1-1.1: 128: ff ff ff ff ff ff ff ff usb 1-1.1: 130: f6 a8 98 2d 03 92 98 00 usb 1-1.1: 138: fc 8c 00 11 9b 44 02 0a usb 1-1.1: 140: ff ff ff ff ff ff ff ff usb 1-1.1: 148: ff ff ff ff ff ff ff ff usb 1-1.1: 150: ff ff ff ff ff ff ff ff usb 1-1.1: 158: ff ff ff ff ff ff ff ff usb 1-1.1: 160: ff ff ff ff ff ff ff ff usb 1-1.1: 168: ff ff ff ff ff ff ff ff usb 1-1.1: 170: ff ff ff ff ff ff ff ff usb 1-1.1: 178: ff ff ff ff ff ff ff ff usb 1-1.1: 180: ff ff ff ff ff ff ff ff usb 1-1.1: 188: ff ff ff ff ff ff ff ff usb 1-1.1: 190: ff ff ff ff ff ff ff ff usb 1-1.1: 198: ff ff ff ff ff ff ff ff usb 1-1.1: 1a0: ff ff ff ff ff ff ff ff usb 1-1.1: 1a8: ff ff ff ff ff ff ff ff usb 1-1.1: 1b0: ff ff ff ff ff ff ff ff usb 1-1.1: 1b8: ff ff ff ff ff ff ff ff usb 1-1.1: 1c0: ff ff ff ff ff ff ff ff usb 1-1.1: 1c8: ff ff ff ff ff ff ff ff usb 1-1.1: 1d0: ff ff ff ff ff ff ff ff usb 1-1.1: 1d8: ff ff ff ff ff ff ff ff usb 1-1.1: 1e0: ff ff ff ff ff ff ff ff usb 1-1.1: 1e8: ff ff ff ff ff ff ff ff usb 1-1.1: 1f0: ff ff ff ff ff ff ff ff usb 1-1.1: 1f8: ff ff ff ff ff ff ff ff usb 1-1.1: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0 usb 1-1.1: RTL8192EU MAC: 00:0b:81:a2:a5:60 usb 1-1.1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin usb 1-1.1: Firmware revision 19.0 (signature 0x92e1) what issue do I get here? Thanks -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] internet radio
Hello everyone, What do you suggest me using for internet radio / playing multimedia on GUI ? Which recipe is suitable for it ? Thanks -- * /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] wlan0: link is not ready ?
Hello everyone, The board can see the dongle but it can not obtain IP, how to fix it ? ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready udhcpc (v1.24.1) started Sending discover... Sending discover... Sending discover... No lease, forking to background -- * /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] 47401300.usb-phy supply vcc not found, using dummy regulator
Hi Everyone, Is my beagleboard usb regulator broken ? Here's the message I got : usbcore: registered new interface driver usb-storage 47401300.usb-phy supply vcc not found, using dummy regulator musb-hdrc musb-hdrc.0.auto: Failed to request rx1. 47401b00.usb-phy supply vcc not found, using dummy regulator -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] Compiling meta-browser ==>chromium ? cleaning ?
It's compiling now, I cross my finger, thanks Guys, EXTRA_OEGYP_prepend = "\ -Dcomponent=shared_library \ -Dremove_webcore_debug_symbols=1 -Dfastbuild=1 \ " On 21/06/17 15:37, Gunnar Andersson wrote: On Wed, 2017-06-21 at 12:42 +0800, Riko Ho wrote: did I put it wrongly ? ... browser/chromium/chromium_54.0.2810.2.bb:7: unparsed line: 'EXTRA_OEGYP_prepend = " -Dcomponent=shared_library Maybe your line break did not use a backslash? It was lost, or just assumed, in Khem's example. See recipe syntax in Yocto manual [1]. Look for the item "Line continuation". HTH - Gunnar [1] http://www.yoctoproject.org/docs/current/mega-manual/mega-manual.html#un derstanding-recipe-syntax -- Gunnar Andersson <ganders...@genivi.org> Development Lead GENIVI Alliance -- * /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] Compiling meta-browser ==>chromium ? cleaning ?
Like this ? EXTRA_OEGYP_prepend = "\ -Dcomponent=shared_library -Dremove_webcore_debug_symbols=1 -Dfastbuild=1 \" On 21/06/17 15:37, Gunnar Andersson wrote: On Wed, 2017-06-21 at 12:42 +0800, Riko Ho wrote: did I put it wrongly ? ... browser/chromium/chromium_54.0.2810.2.bb:7: unparsed line: 'EXTRA_OEGYP_prepend = " -Dcomponent=shared_library Maybe your line break did not use a backslash? It was lost, or just assumed, in Khem's example. See recipe syntax in Yocto manual [1]. Look for the item "Line continuation". HTH - Gunnar [1] http://www.yoctoproject.org/docs/current/mega-manual/mega-manual.html#un derstanding-recipe-syntax -- Gunnar Andersson <ganders...@genivi.org> Development Lead GENIVI Alliance -- * /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] Compiling meta-browser ==>chromium ? cleaning ?
did I put it wrongly ? === Loading cache: 100% |#| Time: 0:00:01 Loaded 2794 entries from dependency cache. ERROR: ParseError at /home/bianchi77/poky/meta-browser/recipes-browser/chromium/chromium_54.0.2810.2.bb:7: unparsed line: 'EXTRA_OEGYP_prepend = " -Dcomponent=shared_library On 21/06/17 10:28, Khem Raj wrote: add it to chromium recipe itself if you dont have a bbappend for it. On Tue, Jun 20, 2017 at 9:53 PM, Riko Ho <antonius.r...@gmail.com> wrote: Ok, thanks a lot for the parameter idea, where will I put that ? local.conf, bblayers.conf ? On 20/06/17 13:08, Khem Raj wrote: On Mon, Jun 19, 2017 at 8:32 PM, Riko Ho <antonius.r...@gmail.com> wrote: My memory is 8Gb and swap 8Gb, 8 cores i7, may be a homemade cluster can help ? add something like EXTRA_OEGYP_prepend = " -Dcomponent=shared_library -Dremove_webcore_debug_symbols=1 -Dfastbuild=1 " and see if that helps. I compiled firefox and it worked well, but still wondering why chromium didn't work. On 20/06/17 04:01, Khem Raj wrote: On Mon, Jun 19, 2017 at 7:21 AM, Jacobo Aragunde Pérez <jaragu...@igalia.com> wrote: On 18/06/17 20:10, Gunnar Andersson wrote: Riko Ho <antonius.r...@gmail.com> wrote: Hello Everyone, I tried to compile chromium but never succeeded, took me already 12 hours and stopped on 99%, I used bitbake for doing it, Not sure what would cause it to just stop and it could have been some temporary glitch? Maybe you want to provide some logs of your build if Martin's reference does not help. Just a heads-up, if it stopped at 99% it probably was in the linking phase (you can check the logs under tmp/work/$arch/chromium-wayland/$version/temp/log.do_compile to be certain). This phase has a very high RAM demand, you could even need to temporarily increase your swap space to go past that point. linker takes a whole lot of memory here, if you have < 8G of RAM its likely to fail with out of memory errors. Can you check your dmesg and see if there were such errors in there Best, -- Jacobo Aragunde Software Engineer at Igalia -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ -- /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ -- * /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] Compiling meta-browser ==>chromium ? cleaning ?
drwxrwxr-x 5 bianchi77 bianchi77 4.0K Jun 14 14:31 . drwxrwxr-x 3 bianchi77 bianchi77 4.0K Jun 12 15:50 .. drwxrwxr-x 2 bianchi77 bianchi77 4.0K Jun 12 15:50 cef3 -rw-rw-r-- 1 bianchi77 bianchi77 2.7K Jun 12 15:50 cef3_280796.bb drwxrwxr-x 4 bianchi77 bianchi77 4.0K Jun 12 15:50 chromium *-rw-rw-r-- 1 bianchi77 bianchi77 1.2K Jun 12 15:50 chromium_54.0.2810.2.bb* -rw-rw-r-- 1 bianchi77 bianchi77 11K Jun 12 15:50 chromium-browser.inc -rw-rw-r-- 1 bianchi77 bianchi77 4.6K Jun 12 15:50 chromium.inc -rw-rw-r-- 1 bianchi77 bianchi77 2.2K Jun 12 15:50 chromium-wayland_53.0.2785.143.bb drwxrwxr-x 8 bianchi77 bianchi77 4.0K Jun 12 15:50 files is this one ? *chromium_54.0.2810.2.bb ? Thanks * On 21/06/17 10:28, Khem Raj wrote: add it to chromium recipe itself if you dont have a bbappend for it. On Tue, Jun 20, 2017 at 9:53 PM, Riko Ho <antonius.r...@gmail.com> wrote: Ok, thanks a lot for the parameter idea, where will I put that ? local.conf, bblayers.conf ? On 20/06/17 13:08, Khem Raj wrote: On Mon, Jun 19, 2017 at 8:32 PM, Riko Ho <antonius.r...@gmail.com> wrote: My memory is 8Gb and swap 8Gb, 8 cores i7, may be a homemade cluster can help ? add something like EXTRA_OEGYP_prepend = " -Dcomponent=shared_library -Dremove_webcore_debug_symbols=1 -Dfastbuild=1 " and see if that helps. I compiled firefox and it worked well, but still wondering why chromium didn't work. On 20/06/17 04:01, Khem Raj wrote: On Mon, Jun 19, 2017 at 7:21 AM, Jacobo Aragunde Pérez <jaragu...@igalia.com> wrote: On 18/06/17 20:10, Gunnar Andersson wrote: Riko Ho <antonius.r...@gmail.com> wrote: Hello Everyone, I tried to compile chromium but never succeeded, took me already 12 hours and stopped on 99%, I used bitbake for doing it, Not sure what would cause it to just stop and it could have been some temporary glitch? Maybe you want to provide some logs of your build if Martin's reference does not help. Just a heads-up, if it stopped at 99% it probably was in the linking phase (you can check the logs under tmp/work/$arch/chromium-wayland/$version/temp/log.do_compile to be certain). This phase has a very high RAM demand, you could even need to temporarily increase your swap space to go past that point. linker takes a whole lot of memory here, if you have < 8G of RAM its likely to fail with out of memory errors. Can you check your dmesg and see if there were such errors in there Best, -- Jacobo Aragunde Software Engineer at Igalia -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ -- /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ -- * /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] RTL8192EU rev B (SMIC) ==> rtl8192eu_nic.bin ?
I got those messages : === musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1 musb-hdrc musb-hdrc.1.auto: VBUS_ERROR in a_wait_vrise (89, <AValid), retry #1, port1 0100 musb-hdrc musb-hdrc.1.auto: VBUS_ERROR in a_wait_vrise (89, <AValid), retry #2, port1 0104 musb-hdrc musb-hdrc.1.auto: VBUS_ERROR in a_wait_vrise (89, <AValid), retry #3, port1 0104 musb-hdrc musb-hdrc.1.auto: VBUS_ERROR in a_wait_vrise (88, <AValid), retry #3, port1 0008010c waiting for vrise ? On 21/06/17 10:28, Khem Raj wrote: On Tue, Jun 20, 2017 at 9:52 PM, Riko Ho <antonius.r...@gmail.com> wrote: How can I obtain that "udev" ? and where can I find the log ? "dmesg" | "grep" ? Two days ago, I saw activity on UART when the dongle was inserted, but it's gone now, I can't see the activity.. Any clues ? dmesg should have some information may be Thanks On 20/06/17 12:51, Khem Raj wrote: On Mon, Jun 19, 2017 at 8:46 PM, Riko Ho <antonius.r...@gmail.com> wrote: I got all the files needed, but now I get no response from the dongle when I plug it, you might want to check logs and see if there are udev events generated on insertion. Here's the files on the board : root@beaglebone:/lib/firmware/rtlwifi# ls rtl8188efw.bin rtl8192eu_ap_wowlan.bin rtl8723bs_bt.bin rtl8188eufw.bin rtl8192eu_nic.binrtl8723bs_nic.bin rtl8192cfw.bin rtl8192eu_wowlan.bin rtl8723bs_wowlan.bin rtl8192cfwU.bin rtl8192sefw.bin rtl8723bu_ap_wowlan.bin rtl8192cfwU_B.binrtl8712u.bin rtl8723bu_nic.bin rtl8192cufw.bin rtl8723aufw_A.binrtl8723bu_wowlan.bin rtl8192cufw_A.binrtl8723aufw_B.binrtl8723fw.bin rtl8192cufw_B.binrtl8723aufw_B_NoBT.bin rtl8723fw_B.bin rtl8192cufw_TMSC.bin rtl8723befw.bin rtl8821aefw.bin rtl8192defw.bin rtl8723befw_36.bin rtl8821aefw_29.bin rtl8192eefw.bin rtl8723bs_ap_wowlan.bin rtl8821aefw_wowlan.bin On 20/06/17 03:57, Khem Raj wrote: On Sun, Jun 18, 2017 at 8:00 PM, Riko Ho <antonius.r...@gmail.com> wrote: Hello Everyone, How can I obtain : rtl8192eu_nic.bin? I got this message : RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0 usb 1-1: RTL8192EU MAC: 00:0b:81:a2:a5:60 usb 1-1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin usb 1-1: Direct firmware load for rtlwifi/rtl8192eu_nic.bin failed with error -2 usb 1-1: request_firmware(rtlwifi/rtl8192eu_nic.bin) failed you probably need to add the nonfree firmware bits something like this https://github.com/resin-os/meta-resin/blob/master/meta-resin-common/recipes-kernel/linux-firmware/linux-firmware_git.bbappend and https://github.com/resin-os/meta-resin/blob/master/meta-resin-common/recipes-kernel/rtl8192cu/rtl8192cu_4.0.2_9000.bb might help Thanks, On 18/06/17 15:49, Martin Jansa wrote: You didn't say which versions you're using. If you're using latest oe-core with gcc7 then you will need v3 version of this change: http://lists.openembedded.org/pipermail/openembedded-devel/2017-June/113247.html I'll send it later today. And how can I clean after building it ? It took about 70Gb of my drive Like any other recipe: bitbake -c clean foo On Sun, Jun 18, 2017 at 1:41 AM, Riko Ho <antonius.r...@gmail.com> wrote: Hello Everyone, I tried to compile chromium but never succeeded, took me already 12 hours and stopped on 99%, I used bitbake for doing it, Is chromium not compatible with arm CPU ? it was working with X86_64 before. And how can I clean after building it ? It took about 70Gb of my drive Thanks -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ -- /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ -- * /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] Compiling meta-browser ==>chromium ? cleaning ?
Ok, thanks a lot for the parameter idea, where will I put that ? local.conf, bblayers.conf ? On 20/06/17 13:08, Khem Raj wrote: On Mon, Jun 19, 2017 at 8:32 PM, Riko Ho <antonius.r...@gmail.com> wrote: My memory is 8Gb and swap 8Gb, 8 cores i7, may be a homemade cluster can help ? add something like EXTRA_OEGYP_prepend = " -Dcomponent=shared_library -Dremove_webcore_debug_symbols=1 -Dfastbuild=1 " and see if that helps. I compiled firefox and it worked well, but still wondering why chromium didn't work. On 20/06/17 04:01, Khem Raj wrote: On Mon, Jun 19, 2017 at 7:21 AM, Jacobo Aragunde Pérez <jaragu...@igalia.com> wrote: On 18/06/17 20:10, Gunnar Andersson wrote: Riko Ho <antonius.r...@gmail.com> wrote: Hello Everyone, I tried to compile chromium but never succeeded, took me already 12 hours and stopped on 99%, I used bitbake for doing it, Not sure what would cause it to just stop and it could have been some temporary glitch? Maybe you want to provide some logs of your build if Martin's reference does not help. Just a heads-up, if it stopped at 99% it probably was in the linking phase (you can check the logs under tmp/work/$arch/chromium-wayland/$version/temp/log.do_compile to be certain). This phase has a very high RAM demand, you could even need to temporarily increase your swap space to go past that point. linker takes a whole lot of memory here, if you have < 8G of RAM its likely to fail with out of memory errors. Can you check your dmesg and see if there were such errors in there Best, -- Jacobo Aragunde Software Engineer at Igalia -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ -- * /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] RTL8192EU rev B (SMIC) ==> rtl8192eu_nic.bin ?
How can I obtain that "udev" ? and where can I find the log ? "dmesg" | "grep" ? Two days ago, I saw activity on UART when the dongle was inserted, but it's gone now, I can't see the activity.. Any clues ? Thanks On 20/06/17 12:51, Khem Raj wrote: On Mon, Jun 19, 2017 at 8:46 PM, Riko Ho <antonius.r...@gmail.com> wrote: I got all the files needed, but now I get no response from the dongle when I plug it, you might want to check logs and see if there are udev events generated on insertion. Here's the files on the board : root@beaglebone:/lib/firmware/rtlwifi# ls rtl8188efw.bin rtl8192eu_ap_wowlan.bin rtl8723bs_bt.bin rtl8188eufw.bin rtl8192eu_nic.binrtl8723bs_nic.bin rtl8192cfw.bin rtl8192eu_wowlan.bin rtl8723bs_wowlan.bin rtl8192cfwU.bin rtl8192sefw.bin rtl8723bu_ap_wowlan.bin rtl8192cfwU_B.binrtl8712u.bin rtl8723bu_nic.bin rtl8192cufw.bin rtl8723aufw_A.binrtl8723bu_wowlan.bin rtl8192cufw_A.binrtl8723aufw_B.binrtl8723fw.bin rtl8192cufw_B.binrtl8723aufw_B_NoBT.bin rtl8723fw_B.bin rtl8192cufw_TMSC.bin rtl8723befw.bin rtl8821aefw.bin rtl8192defw.bin rtl8723befw_36.bin rtl8821aefw_29.bin rtl8192eefw.bin rtl8723bs_ap_wowlan.bin rtl8821aefw_wowlan.bin On 20/06/17 03:57, Khem Raj wrote: On Sun, Jun 18, 2017 at 8:00 PM, Riko Ho <antonius.r...@gmail.com> wrote: Hello Everyone, How can I obtain : rtl8192eu_nic.bin? I got this message : RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0 usb 1-1: RTL8192EU MAC: 00:0b:81:a2:a5:60 usb 1-1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin usb 1-1: Direct firmware load for rtlwifi/rtl8192eu_nic.bin failed with error -2 usb 1-1: request_firmware(rtlwifi/rtl8192eu_nic.bin) failed you probably need to add the nonfree firmware bits something like this https://github.com/resin-os/meta-resin/blob/master/meta-resin-common/recipes-kernel/linux-firmware/linux-firmware_git.bbappend and https://github.com/resin-os/meta-resin/blob/master/meta-resin-common/recipes-kernel/rtl8192cu/rtl8192cu_4.0.2_9000.bb might help Thanks, On 18/06/17 15:49, Martin Jansa wrote: You didn't say which versions you're using. If you're using latest oe-core with gcc7 then you will need v3 version of this change: http://lists.openembedded.org/pipermail/openembedded-devel/2017-June/113247.html I'll send it later today. And how can I clean after building it ? It took about 70Gb of my drive Like any other recipe: bitbake -c clean foo On Sun, Jun 18, 2017 at 1:41 AM, Riko Ho <antonius.r...@gmail.com> wrote: Hello Everyone, I tried to compile chromium but never succeeded, took me already 12 hours and stopped on 99%, I used bitbake for doing it, Is chromium not compatible with arm CPU ? it was working with X86_64 before. And how can I clean after building it ? It took about 70Gb of my drive Thanks -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ -- * /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] RTL8192EU rev B (SMIC) ==> rtl8192eu_nic.bin ?
I got all the files needed, but now I get no response from the dongle when I plug it, Here's the files on the board : root@beaglebone:/lib/firmware/rtlwifi# ls rtl8188efw.bin rtl8192eu_ap_wowlan.bin rtl8723bs_bt.bin rtl8188eufw.binrtl8192eu_nic.bin rtl8723bs_nic.bin rtl8192cfw.bin rtl8192eu_wowlan.bin rtl8723bs_wowlan.bin rtl8192cfwU.bin rtl8192sefw.bin rtl8723bu_ap_wowlan.bin rtl8192cfwU_B.binrtl8712u.bin rtl8723bu_nic.bin rtl8192cufw.bin rtl8723aufw_A.bin rtl8723bu_wowlan.bin rtl8192cufw_A.binrtl8723aufw_B.bin rtl8723fw.bin rtl8192cufw_B.binrtl8723aufw_B_NoBT.bin rtl8723fw_B.bin rtl8192cufw_TMSC.bin rtl8723befw.bin rtl8821aefw.bin rtl8192defw.bin rtl8723befw_36.bin rtl8821aefw_29.bin rtl8192eefw.bin rtl8723bs_ap_wowlan.bin rtl8821aefw_wowlan.bin On 20/06/17 03:57, Khem Raj wrote: On Sun, Jun 18, 2017 at 8:00 PM, Riko Ho <antonius.r...@gmail.com> wrote: Hello Everyone, How can I obtain : rtl8192eu_nic.bin? I got this message : RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0 usb 1-1: RTL8192EU MAC: 00:0b:81:a2:a5:60 usb 1-1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin usb 1-1: Direct firmware load for rtlwifi/rtl8192eu_nic.bin failed with error -2 usb 1-1: request_firmware(rtlwifi/rtl8192eu_nic.bin) failed you probably need to add the nonfree firmware bits something like this https://github.com/resin-os/meta-resin/blob/master/meta-resin-common/recipes-kernel/linux-firmware/linux-firmware_git.bbappend and https://github.com/resin-os/meta-resin/blob/master/meta-resin-common/recipes-kernel/rtl8192cu/rtl8192cu_4.0.2_9000.bb might help Thanks, On 18/06/17 15:49, Martin Jansa wrote: You didn't say which versions you're using. If you're using latest oe-core with gcc7 then you will need v3 version of this change: http://lists.openembedded.org/pipermail/openembedded-devel/2017-June/113247.html I'll send it later today. And how can I clean after building it ? It took about 70Gb of my drive Like any other recipe: bitbake -c clean foo On Sun, Jun 18, 2017 at 1:41 AM, Riko Ho <antonius.r...@gmail.com> wrote: Hello Everyone, I tried to compile chromium but never succeeded, took me already 12 hours and stopped on 99%, I used bitbake for doing it, Is chromium not compatible with arm CPU ? it was working with X86_64 before. And how can I clean after building it ? It took about 70Gb of my drive Thanks -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- * /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] RTL8192EU rev B (SMIC) ==> rtl8192eu_nic.bin ?
I've put meta == > linux-firmware, but stil doesn't work, probably a hardware issue ? I'll post my debug log later on, I've checked that it can read *.bin on /lib/firmware, but still can not initialize properly, don't know why yet. On 20/06/17 03:57, Khem Raj wrote: On Sun, Jun 18, 2017 at 8:00 PM, Riko Ho <antonius.r...@gmail.com> wrote: Hello Everyone, How can I obtain : rtl8192eu_nic.bin? I got this message : RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0 usb 1-1: RTL8192EU MAC: 00:0b:81:a2:a5:60 usb 1-1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin usb 1-1: Direct firmware load for rtlwifi/rtl8192eu_nic.bin failed with error -2 usb 1-1: request_firmware(rtlwifi/rtl8192eu_nic.bin) failed you probably need to add the nonfree firmware bits something like this https://github.com/resin-os/meta-resin/blob/master/meta-resin-common/recipes-kernel/linux-firmware/linux-firmware_git.bbappend and https://github.com/resin-os/meta-resin/blob/master/meta-resin-common/recipes-kernel/rtl8192cu/rtl8192cu_4.0.2_9000.bb might help Thanks, On 18/06/17 15:49, Martin Jansa wrote: You didn't say which versions you're using. If you're using latest oe-core with gcc7 then you will need v3 version of this change: http://lists.openembedded.org/pipermail/openembedded-devel/2017-June/113247.html I'll send it later today. And how can I clean after building it ? It took about 70Gb of my drive Like any other recipe: bitbake -c clean foo On Sun, Jun 18, 2017 at 1:41 AM, Riko Ho <antonius.r...@gmail.com> wrote: Hello Everyone, I tried to compile chromium but never succeeded, took me already 12 hours and stopped on 99%, I used bitbake for doing it, Is chromium not compatible with arm CPU ? it was working with X86_64 before. And how can I clean after building it ? It took about 70Gb of my drive Thanks -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- * /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] Compiling meta-browser ==>chromium ? cleaning ?
My memory is 8Gb and swap 8Gb, 8 cores i7, may be a homemade cluster can help ? I compiled firefox and it worked well, but still wondering why chromium didn't work. On 20/06/17 04:01, Khem Raj wrote: On Mon, Jun 19, 2017 at 7:21 AM, Jacobo Aragunde Pérez <jaragu...@igalia.com> wrote: On 18/06/17 20:10, Gunnar Andersson wrote: Riko Ho <antonius.r...@gmail.com> wrote: Hello Everyone, I tried to compile chromium but never succeeded, took me already 12 hours and stopped on 99%, I used bitbake for doing it, Not sure what would cause it to just stop and it could have been some temporary glitch? Maybe you want to provide some logs of your build if Martin's reference does not help. Just a heads-up, if it stopped at 99% it probably was in the linking phase (you can check the logs under tmp/work/$arch/chromium-wayland/$version/temp/log.do_compile to be certain). This phase has a very high RAM demand, you could even need to temporarily increase your swap space to go past that point. linker takes a whole lot of memory here, if you have < 8G of RAM its likely to fail with out of memory errors. Can you check your dmesg and see if there were such errors in there Best, -- Jacobo Aragunde Software Engineer at Igalia -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- * /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] RTL8192EU rev B (SMIC) ==> rtl8192eu_nic.bin ?
Hello Everyone, How can I obtain : rtl8192eu_nic.bin? I got this message : RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0 usb 1-1: RTL8192EU MAC: 00:0b:81:a2:a5:60 usb 1-1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin usb 1-1: Direct firmware load for rtlwifi/rtl8192eu_nic.bin failed with error -2 usb 1-1: request_firmware(rtlwifi/rtl8192eu_nic.bin) failed Thanks, On 18/06/17 15:49, Martin Jansa wrote: You didn't say which versions you're using. If you're using latest oe-core with gcc7 then you will need v3 version of this change: http://lists.openembedded.org/pipermail/openembedded-devel/2017-June/113247.html I'll send it later today. > And how can I clean after building it ? It took about 70Gb of my drive Like any other recipe: bitbake -c clean foo On Sun, Jun 18, 2017 at 1:41 AM, Riko Ho <antonius.r...@gmail.com <mailto:antonius.r...@gmail.com>> wrote: Hello Everyone, I tried to compile chromium but never succeeded, took me already 12 hours and stopped on 99%, I used bitbake for doing it, Is chromium not compatible with arm CPU ? it was working with X86_64 before. And how can I clean after building it ? It took about 70Gb of my drive Thanks -- ___ yocto mailing list yocto@yoctoproject.org <mailto:yocto@yoctoproject.org> https://lists.yoctoproject.org/listinfo/yocto <https://lists.yoctoproject.org/listinfo/yocto> -- * /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] dd image to sdcard ?
Thanks Guys, I think this one will answer my question, http://git.yoctoproject.org/cgit.cgi/poky/tree/README.hardware Line 140... |Texas Instruments Beaglebone (beaglebone) = ... Anyway I recompiled the image to get 'wic' file now. IMAGE_FSTYPES ="ext3 tar.bz2 wic" | On 19/06/17 03:37, Maciej Borzęcki wrote: On Sun, Jun 18, 2017 at 9:17 PM, Burton, Ross <ross.bur...@intel.com> wrote: On 18 June 2017 at 12:48, Riko Ho <antonius.r...@gmail.com> wrote: Which one of these files can be downloaded by "dd" directly to SDcard ? or how to write it to sdcard ? The beaglebone BSP doesn't write a SD card image (although it probably should now that wic exists). Google has various pages explaining how a beaglebone needs a SD card to be formatted, https://github.com/linneman/planck/wiki/How-to-create-a-Boot-SD-Card-for-the-BeagleBone-black was near the top of my search. If you're using 'beaglebone' machine defined in meta-yocto-bsp, then there is a corresponding wks file https://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/meta-yocto-bsp/wic/beaglebone.wks which should produce a bootable SD card image. Both `wic` and `wic.bmap` are added to IMAGE_FSTYPES automatically. Cheers, -- * /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] dd image to sdcard ?
Hi Everyone, Which one of these files can be downloaded by "dd" directly to SDcard ? or how to write it to sdcard ? lrwxrwxrwx 1 bianchi77 bianchi77 61 Jun 18 19:34 core-image-minimal-xfce-beaglebone.ext3 -> core-image-minimal-xfce-beaglebone-20170618070558.rootfs.ext3 lrwxrwxrwx 1 bianchi77 bianchi77 65 Jun 18 19:34 core-image-minimal-xfce-beaglebone.manifest -> core-image-minimal-xfce-beaglebone-20170618070558.rootfs.manifest lrwxrwxrwx 1 bianchi77 bianchi77 64 Jun 18 19:34 core-image-minimal-xfce-beaglebone.tar.bz2 -> core-image-minimal-xfce-beaglebone-20170618070558.rootfs.tar.bz2 lrwxrwxrwx 1 bianchi77 bianchi77 25 Jun 18 18:17 MLO -> MLO-beaglebone-2017.01-r0 lrwxrwxrwx 1 bianchi77 bianchi77 25 Jun 18 18:17 MLO-beaglebone -> MLO-beaglebone-2017.01-r0 -rw-r--r-- 1 bianchi77 bianchi77 70K Jun 18 18:17 MLO-beaglebone-2017.01-r0 -rw-rw-r-- 2 bianchi77 bianchi77 48M Jun 18 19:21 modules--4.10.9+git0+ad2e885015_fe0fb8da3d-r0-beaglebone-20170618070558.tgz lrwxrwxrwx 2 bianchi77 bianchi77 75 Jun 18 19:21 modules-beaglebone.tgz -> modules--4.10.9+git0+ad2e885015_fe0fb8da3d-r0-beaglebone-20170618070558.tgz -rw-r--r-- 1 bianchi77 bianchi77 360K Jun 18 18:17 u-boot-beaglebone-2017.01-r0.img lrwxrwxrwx 1 bianchi77 bianchi77 32 Jun 18 18:17 u-boot-beaglebone.img -> u-boot-beaglebone-2017.01-r0.img lrwxrwxrwx 1 bianchi77 bianchi77 32 Jun 18 18:17 u-boot.img -> u-boot-beaglebone-2017.01-r0.img lrwxrwxrwx 2 bianchi77 bianchi77 74 Jun 18 19:21 zImage -> zImage--4.10.9+git0+ad2e885015_fe0fb8da3d-r0-beaglebone-20170618070558.bin -rw-r--r-- 2 bianchi77 bianchi77 32K Jun 18 19:21 zImage--4.10.9+git0+ad2e885015_fe0fb8da3d-r0-am335x-bone-20170618070558.dtb -rw-r--r-- 2 bianchi77 bianchi77 34K Jun 18 19:21 zImage--4.10.9+git0+ad2e885015_fe0fb8da3d-r0-am335x-boneblack-20170618070558.dtb -rw-r--r-- 2 bianchi77 bianchi77 5.4M Jun 18 19:21 zImage--4.10.9+git0+ad2e885015_fe0fb8da3d-r0-beaglebone-20170618070558.bin lrwxrwxrwx 2 bianchi77 bianchi77 80 Jun 18 19:21 zImage-am335x-boneblack.dtb -> zImage--4.10.9+git0+ad2e885015_fe0fb8da3d-r0-am335x-boneblack-20170618070558.dtb lrwxrwxrwx 2 bianchi77 bianchi77 75 Jun 18 19:21 zImage-am335x-bone.dtb -> zImage--4.10.9+git0+ad2e885015_fe0fb8da3d-r0-am335x-bone-20170618070558.dtb lrwxrwxrwx 2 bianchi77 bianchi77 74 Jun 18 19:21 zImage-beaglebone.bin -> zImage--4.10.9+git0+ad2e885015_fe0fb8da3d-r0-beaglebone-20170618070558.bin thanks -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] Compiling meta-browser ==>chromium ? cleaning ?
What version are you talking about ? how can I know that ? Thanks On 18/06/17 15:49, Martin Jansa wrote: You didn't say which versions you're using. If you're using latest oe-core with gcc7 then you will need v3 version of this change: http://lists.openembedded.org/pipermail/openembedded-devel/2017-June/113247.html I'll send it later today. > And how can I clean after building it ? It took about 70Gb of my drive Like any other recipe: bitbake -c clean foo On Sun, Jun 18, 2017 at 1:41 AM, Riko Ho <antonius.r...@gmail.com <mailto:antonius.r...@gmail.com>> wrote: Hello Everyone, I tried to compile chromium but never succeeded, took me already 12 hours and stopped on 99%, I used bitbake for doing it, Is chromium not compatible with arm CPU ? it was working with X86_64 before. And how can I clean after building it ? It took about 70Gb of my drive Thanks -- ___ yocto mailing list yocto@yoctoproject.org <mailto:yocto@yoctoproject.org> https://lists.yoctoproject.org/listinfo/yocto <https://lists.yoctoproject.org/listinfo/yocto> -- * /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] Compiling meta-browser ==>chromium ? cleaning ?
Hello Everyone, I tried to compile chromium but never succeeded, took me already 12 hours and stopped on 99%, I used bitbake for doing it, Is chromium not compatible with arm CPU ? it was working with X86_64 before. And how can I clean after building it ? It took about 70Gb of my drive Thanks -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] Image type on bitbake ?
Hi Everyone, What parameter do I add to bitbake for getting *.hddimg or *.wic image ? for example bitbake -??? core-image-sato Thanks -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] Meta-web-kiosk Layer
Hello Everyone,
I tried doing bitbake core-image-web-kiosk and got some errors, does
anyone know how to fix it ? thanks,
Loading cache: 100%
|#|
Time: 0:00:00
Loaded 1310 entries from dependency cache.
ERROR: ExpansionError during parsing
/home/bianchi77/poky/meta-web-kiosk/recipes-browser/vala/vala_0.16.0.bb
| ETA: --:--:--
Traceback (most recent call last):
File "/home/bianchi77/poky/bitbake/lib/bb/data_smart.py", line 412,
in
DataSmart.expandWithRefs(s='http://ftp.gnome.org/pub/GNOME/sources/${BPN}/${SHRT_VER}/${BP}.tar.xz
http://ftp.gnome.org/pub/GNOME/sources/vala/0.36/vala-0.36.0.tar.xz',
varname='SRC_URI'):
try:
>s = __expand_var_regexp__.sub(varparse.var_sub, s)
try:
File "/home/bianchi77/poky/bitbake/lib/bb/data_smart.py", line 111,
in VariableParse.var_sub(match=<_sre.SRE_Match object; span=(46, 57),
match='${SHRT_VER}'>):
else:
>var = self.d.getVarFlag(key, "_content")
self.references.add(key)
File "/home/bianchi77/poky/bitbake/lib/bb/data_smart.py", line 794,
in DataSmart.getVarFlag(var='SHRT_VER', flag='_content', expand=True,
noweakdefault=False, parsing=False):
cachename = var + "[" + flag + "]"
>value = self.expand(value, cachename)
File "/home/bianchi77/poky/bitbake/lib/bb/data_smart.py", line 436,
in
DataSmart.expand(s="${@bb.data.getVar('PV',d,1).split('.')[0]}.${@bb.data.getVar('PV',d,1).split('.')[1]}",
varname='SHRT_VER'):
def expand(self, s, varname = None):
>return self.expandWithRefs(s, varname).value
File "/home/bianchi77/poky/bitbake/lib/bb/data_smart.py", line 426,
in
DataSmart.expandWithRefs(s="${@bb.data.getVar('PV',d,1).split('.')[0]}.${@bb.data.getVar('PV',d,1).split('.')[1]}",
varname='SHRT_VER'):
except Exception as exc:
>raise ExpansionError(varname, s, exc) from exc
bb.data_smart.ExpansionError: Failure expanding variable SHRT_VER,
expression was
${@bb.data.getVar('PV',d,1).split('.')[0]}.${@bb.data.getVar('PV',d,1).split('.')[1]}
which triggered exception AttributeError: module 'bb.data' has no
attribute 'getVar'
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
--
*
/***/
Sent by Ubuntu LTS 16.04,
谢谢,
Regards,
Riko Ho
/***/
*
--
___
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
Re: [yocto] FriendlyArm Mini6410 ?
Hi Everyone, Is it possible that I only change the kernel config to support this CPU S3C6410 ? or I'm gonna need something else ? bitbake linux-yocto -c menuconfig ? It's ARM1176JZF-S based CPU Thanks On 15/06/17 14:05, Belisko Marek wrote: Hi Riko, On Thu, Jun 15, 2017 at 7:53 AM, Riko Ho <antonius.r...@gmail.com> wrote: Hello Everyone, I want to use Yocto for my FriendlyArm Mini6410, Where should I begin to start ? Please read following thread: https://lists.yoctoproject.org/pipermail/yocto/2014-June/020009.html Thanks -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto BR, marek -- * /***/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /***/ * -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] FriendlyArm Mini6410 ?
Hello Everyone, I want to use Yocto for my FriendlyArm Mini6410, Where should I begin to start ? Thanks -- ___ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto
[yocto] bitbake core-image-web-kiosk question ?
Hello Everyone,
I tried doing "bitbake core-image-web-kiosk"
And I got this :
Loading cache: 100%
|#|
Time: 0:00:00
Loaded 1310 entries from dependency cache.
ERROR: ExpansionError during parsing
/home/bianchi77/poky/meta-web-kiosk/recipes-browser/vala/vala_0.16.0.bb
| ETA: --:--:--
Traceback (most recent call last):
File "/home/bianchi77/poky/bitbake/lib/bb/data_smart.py", line 412,
in
DataSmart.expandWithRefs(s='http://ftp.gnome.org/pub/GNOME/sources/${BPN}/${SHRT_VER}/${BP}.tar.xz
http://ftp.gnome.org/pub/GNOME/sources/vala/0.36/vala-0.36.0.tar.xz',
varname='SRC_URI'):
try:
>s = __expand_var_regexp__.sub(varparse.var_sub, s)
try:
File "/home/bianchi77/poky/bitbake/lib/bb/data_smart.py", line 111,
in VariableParse.var_sub(match=<_sre.SRE_Match object; span=(46, 57),
match='${SHRT_VER}'>):
else:
>var = self.d.getVarFlag(key, "_content")
self.references.add(key)
File "/home/bianchi77/poky/bitbake/lib/bb/data_smart.py", line 794,
in DataSmart.getVarFlag(var='SHRT_VER', flag='_content', expand=True,
noweakdefault=False, parsing=False):
cachename = var + "[" + flag + "]"
>value = self.expand(value, cachename)
File "/home/bianchi77/poky/bitbake/lib/bb/data_smart.py", line 436,
in
DataSmart.expand(s="${@bb.data.getVar('PV',d,1).split('.')[0]}.${@bb.data.getVar('PV',d,1).split('.')[1]}",
varname='SHRT_VER'):
def expand(self, s, varname = None):
>return self.expandWithRefs(s, varname).value
File "/home/bianchi77/poky/bitbake/lib/bb/data_smart.py", line 426,
in
DataSmart.expandWithRefs(s="${@bb.data.getVar('PV',d,1).split('.')[0]}.${@bb.data.getVar('PV',d,1).split('.')[1]}",
varname='SHRT_VER'):
except Exception as exc:
>raise ExpansionError(varname, s, exc) from exc
bb.data_smart.ExpansionError: Failure expanding variable SHRT_VER,
expression was
${@bb.data.getVar('PV',d,1).split('.')[0]}.${@bb.data.getVar('PV',d,1).split('.')[1]}
which triggered exception AttributeError: module 'bb.data' has no
attribute 'getVar'
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
===
Does anyone know how to fix it ?
I used poky with pyro release,
Thanks
--
*
/***/
Sent by Ubuntu LTS 16.04,
谢谢,
Regards,
Riko Ho
/***/
*
--
___
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
