Re: [zd1211-devs] Hard freeze 2.6.23.1 and zd1211rw,please help
arandamandi wrote: Slackware current kernel 2.6.23.1 zyxegl g-220 if i try my wireless card...hard lockups and freezes! This is my network conf # /etc/rc.d/rc.inet1.conf # # This file contains the configuration settings for network interfaces. # If USE_DHCP[interface] is set to yes, this overrides any other settings. # If you don't have an interface, leave the settings null (). # You can configure network interfaces other than eth0,eth1... by setting # IFNAME[interface] to the interface's name. If IFNAME[interface] is unset # or empty, it is assumed you're configuring ethinterface. # Several other parameters are available, the end of this file contains a # comprehensive set of examples. # = # Config information for eth0: #IPADDR[0]=192.168.0.7 #NETMASK[0]=255.255.255.0 #USE_DHCP[0]= #DHCP_HOSTNAME[0]= # Config information for eth1: IPADDR[1]= NETMASK[1]= USE_DHCP[1]= DHCP_HOSTNAME[1]= # Config information for eth2: IPADDR[2]= NETMASK[2]= USE_DHCP[2]= DHCP_HOSTNAME[2]= # Config information for eth3: IPADDR[3]= NETMASK[3]= USE_DHCP[3]= DHCP_HOSTNAME[3]= # Default gateway IP address: GATEWAY=192.168.0.1 # Change this to yes for debugging output to stdout. Unfortunately, # /sbin/hotplug seems to disable stdout so you'll only see debugging output # when rc.inet1 is called directly. DEBUG_ETH_UP=no ## Example config information for wlan0. Uncomment the lines you need and fill ## in your data. (You may not need all of these for your wireless network) IFNAME[4]=wlan0 IPADDR[4]=192.168.0.2 NETMASK[4]=255.255.255.0 #USE_DHCP[4]=yes #DHCP_HOSTNAME[4]=icculus-wireless #DHCP_KEEPRESOLV[4]=yes #DHCP_KEEPNTP[4]=yes #DHCP_KEEPGW[4]=yes #DHCP_IPADDR[4]= WLAN_ESSID[4]=Slack WLAN_MODE[4]=Managed WLAN_RATE[4]=54M auto WLAN_CHANNEL[4]=11 #WLAN_KEY[4]=D #WLAN_IWPRIV[4]=set AuthMode=WPAPSK | set EncrypType=TKIP | set #WPAPSK=*77c0df54 WLAN_WPA[4]=wpa_supplicant WLAN_WPADRIVER[4]=wext WLAN_WPAWAIT[4]=20 ## Some examples of additional network parameters that you can use. ## Config information for wlan0: #IFNAME[4]=wlan0 # Use a different interface name instead of # the default 'eth4' #IFNAME[4]=eth0:1 # Set up an IP alias. #HWADDR[4]=00:01:23:45:67:89 # Overrule the card's hardware MAC address #MTU[4]= # The default MTU is 1500, but you might need # 1360 when you use NAT'ed IPSec traffic. #DHCP_TIMEOUT[4]=15 # The default timeout for the DHCP client to # wait for server resonse is 30 seconds, but # you might want a shorter wait. #DHCP_KEEPRESOLV[4]=yes # If you dont want /etc/resolv.conf overwritten #DHCP_KEEPNTP[4]=yes # If you don't want ntp.conf overwritten #DHCP_KEEPGW[4]=yes # If you don't want the DHCP server to change # your default gateway #DHCP_IPADDR[4]= # Request a specific IP address from the DHCP # server #WLAN_ESSID[4]=DARKSTAR # An example of how you can override _any_ # parameter defined in rc.wireless.conf, by # prepending 'WLAN_' to the parameter's name. # Useful with multiple wireless interfaces. #WLAN_IWPRIV[4]=set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=thekey # Some drivers require a private ioctl to be # set through the iwpriv command. If more than # one is required, you can place them in the # IWPRIV parameter (separated with the pipe (|) # character, see the example). #WLAN_WPA[4]=wpa_supplicant # Run wpa_supplicant for WPA support #WLAN_WPADRIVER[4]=ndiswrapper# Tell wpa_supplicant to specifically use the # ndiswrapper driver (if you leave this empty # the 'wext' driver is used by default) #WLAN_WPAWAIT[4]=30 # In case it takes long for the WPA association # to finish, you can increase the wait time # (defaults to 10 seconds) On syslog..:( Nov 1 13:55:15 Slack kernel: [ cut here ] Nov 1 13:55:15 Slack kernel: BUG: unable to handle kernel NULL pointer dereference at virtual address 0001 Nov 1 13:55:15 Slack kernel: printing eip: Nov 1 13:55:15 Slack kernel: c017e5fd Nov 1 13:55:15 Slack kernel: *pde = Nov 1 13:55:15 Slack kernel: kernel BUG at
[zd1211-devs] Hard freeze 2.6.23.1 and zd1211rw,please help
Slackware current kernel 2.6.23.1 zyxegl g-220 if i try my wireless card...hard lockups and freezes! This is my network conf # /etc/rc.d/rc.inet1.conf # # This file contains the configuration settings for network interfaces. # If USE_DHCP[interface] is set to yes, this overrides any other settings. # If you don't have an interface, leave the settings null (). # You can configure network interfaces other than eth0,eth1... by setting # IFNAME[interface] to the interface's name. If IFNAME[interface] is unset # or empty, it is assumed you're configuring ethinterface. # Several other parameters are available, the end of this file contains a # comprehensive set of examples. # = # Config information for eth0: #IPADDR[0]=192.168.0.7 #NETMASK[0]=255.255.255.0 #USE_DHCP[0]= #DHCP_HOSTNAME[0]= # Config information for eth1: IPADDR[1]= NETMASK[1]= USE_DHCP[1]= DHCP_HOSTNAME[1]= # Config information for eth2: IPADDR[2]= NETMASK[2]= USE_DHCP[2]= DHCP_HOSTNAME[2]= # Config information for eth3: IPADDR[3]= NETMASK[3]= USE_DHCP[3]= DHCP_HOSTNAME[3]= # Default gateway IP address: GATEWAY=192.168.0.1 # Change this to yes for debugging output to stdout. Unfortunately, # /sbin/hotplug seems to disable stdout so you'll only see debugging output # when rc.inet1 is called directly. DEBUG_ETH_UP=no ## Example config information for wlan0. Uncomment the lines you need and fill ## in your data. (You may not need all of these for your wireless network) IFNAME[4]=wlan0 IPADDR[4]=192.168.0.2 NETMASK[4]=255.255.255.0 #USE_DHCP[4]=yes #DHCP_HOSTNAME[4]=icculus-wireless #DHCP_KEEPRESOLV[4]=yes #DHCP_KEEPNTP[4]=yes #DHCP_KEEPGW[4]=yes #DHCP_IPADDR[4]= WLAN_ESSID[4]=Slack WLAN_MODE[4]=Managed WLAN_RATE[4]=54M auto WLAN_CHANNEL[4]=11 #WLAN_KEY[4]=D #WLAN_IWPRIV[4]=set AuthMode=WPAPSK | set EncrypType=TKIP | set #WPAPSK=*77c0df54 WLAN_WPA[4]=wpa_supplicant WLAN_WPADRIVER[4]=wext WLAN_WPAWAIT[4]=20 ## Some examples of additional network parameters that you can use. ## Config information for wlan0: #IFNAME[4]=wlan0 # Use a different interface name instead of # the default 'eth4' #IFNAME[4]=eth0:1 # Set up an IP alias. #HWADDR[4]=00:01:23:45:67:89 # Overrule the card's hardware MAC address #MTU[4]= # The default MTU is 1500, but you might need # 1360 when you use NAT'ed IPSec traffic. #DHCP_TIMEOUT[4]=15 # The default timeout for the DHCP client to # wait for server resonse is 30 seconds, but # you might want a shorter wait. #DHCP_KEEPRESOLV[4]=yes # If you dont want /etc/resolv.conf overwritten #DHCP_KEEPNTP[4]=yes # If you don't want ntp.conf overwritten #DHCP_KEEPGW[4]=yes # If you don't want the DHCP server to change # your default gateway #DHCP_IPADDR[4]= # Request a specific IP address from the DHCP # server #WLAN_ESSID[4]=DARKSTAR # An example of how you can override _any_ # parameter defined in rc.wireless.conf, by # prepending 'WLAN_' to the parameter's name. # Useful with multiple wireless interfaces. #WLAN_IWPRIV[4]=set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=thekey # Some drivers require a private ioctl to be # set through the iwpriv command. If more than # one is required, you can place them in the # IWPRIV parameter (separated with the pipe (|) # character, see the example). #WLAN_WPA[4]=wpa_supplicant # Run wpa_supplicant for WPA support #WLAN_WPADRIVER[4]=ndiswrapper# Tell wpa_supplicant to specifically use the # ndiswrapper driver (if you leave this empty # the 'wext' driver is used by default) #WLAN_WPAWAIT[4]=30 # In case it takes long for the WPA association # to finish, you can increase the wait time # (defaults to 10 seconds) On syslog..:( Nov 1 13:55:15 Slack kernel: [ cut here ] Nov 1 13:55:15 Slack kernel: BUG: unable to handle kernel NULL pointer dereference at virtual address 0001 Nov 1 13:55:15 Slack kernel: printing eip: Nov 1 13:55:15 Slack kernel: c017e5fd Nov 1 13:55:15 Slack kernel: *pde = Nov 1 13:55:15 Slack kernel: kernel BUG at kernel/workqueue.c:221! Nov 1 13:55:15 Slack kernel: invalid opcode: [#1] Nov 1 13:55:15 Slack kernel: SMP Nov 1 13:55:15 Slack kernel: Modules linked in: capability
