Hello! I am completely clueless, but after a wee kstrugling around i can not connect to my access point, which is a belkin pre-n.
I use the Zydas ZyAir 220-G stick. Under Windiws everything is fine. I use Ubuntu Dapper Drake, Kernel is 2.6.15-25 PREEMPT i686 I did modprobe -r zd1211 and build the latest available version of the driver r80. make make install Successfully did depmod -a and modprobe -v zd1211 Thats what dmesg says: [17181098.376000] usb 1-1: new full speed USB device using uhci_hcd and address 2 [17181098.628000] usb 1-1: reset full speed USB device using uhci_hcd and address 2 [17181098.764000] Release Ver = 4330 [17181098.764000] zd1211:bulk out: wMaxPacketSize = 40 [17181098.764000] zd1211:bulk in: wMaxPacketSize = 40 [17181098.764000] zd1211:interrupt in: wMaxPacketSize = 40 [17181098.764000] zd1211:interrupt in: int_interval = 1 [17181098.764000] zd1211:bulk out: wMaxPacketSize = 40 [17181098.764000] EEPORM Ver = 4330 [17181098.776000] zd1211:USB Download Boot code success [17181098.788000] zd1211:MAC address = 00:13:49:00:55:9c [17181098.792000] zd1211:AddrEntryTable = f7d4 [17181098.796000] zd1211:RF_Mode = 0000000d [17181098.796000] PA type: 0 [17181098.796000] RFMD RF [17181098.796000] zd1211:Pure B-Mode [17181099.012000] zd1211:AllowedChannel = 000007ff [17181099.016000] zd1211:LinkLEDn = 200 [17181099.020000] AllowedChannel = 000107ff [17181099.020000] Region:48 [17181099.340000] uhci_hcd 0000:00:11.3: Controller not stopped yet! [17181099.452000] zd1205: (exit) zd1205_config, /home/john/install/zd1211-driver-r80/src/zd1205.c line 2601 [17181099.452000] zd1205: (exit) zd1205_init, /home/john/install/zd1211-driver-r80/src/zd1205.c line 8569 [17181099.716000] zd1205: (enter) zd1205_open, /home/john/install/zd1211-driver-r80/src/zd1205.c line 4352 [17181099.792000] zd1205: (exit) zd1205_open, /home/john/install/zd1211-driver-r80/src/zd1205.c line 4435 [17181099.792000] ADDRCONF(NETDEV_UP): wlan0: link is not ready My interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet dhcp auto eth2 iface eth2 inet dhcp auto ath0 iface ath0 inet dhcp auto wlan0 iface wlan0 inet dhcp Output of iwlist scan: wlan0 Scan completed : Cell 01 - Address: 00:11:50:23:B1:ED ESSID:"Prometheus" Mode:Master Frequency:2.437 GHz (Channel 6) Extra:SignalStrength=41%,LinkQuality:8% Encryption key:off Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Extra:bcn_int=100 Please note, that both SignalStrength and LinkQuality change a lot, and are very often at nearly 100% --- for testing purpose i sit very close to the AP! Output of iwconfig: wlan0 802.11b/g NIC ESSID:"Prometheus" Mode:Managed Frequency=2.462 GHz Access Point: Not-Associated Bit Rate:1 Mb/s Retry:off RTS thr=2432 B Fragment thr:off Encryption key:off Power Management:off Link Quality=100/100 Signal level=36/100 Noise level=0/100 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:378 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 When i connect the stick i get a wlan0 - interface, but when i do iwconfig wlan0 essid <Here> or even iwconfig wlan0 ap x:y:z i never get associated with my access point. Whats wrong? Please help me, i am really desperate now! I have already disabled encryption Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs