[zd1211-devs] essid strangeness

2006-12-17 Thread Jon Smirl
. Using the 2.1 firmware from SF. I can't get reboot to work with 2.2 firmware. -- Jon Smirl [EMAIL PROTECTED] - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get

Re: [zd1211-devs] essid strangeness

2006-12-18 Thread Jon Smirl
: On Sun, 2006-12-17 at 18:31 -0500, Jon Smirl wrote: Linus git kernel, 2.6.20-rc1+ patched softmac for work queue changes Ubuntu Edgy WEP encryption ifup eth1 Won't start the network, if I look in dmesg ADDRCONF(NETDEV_UP): eth1: link is not ready ifup will timeout after a while

Re: [zd1211-devs] essid strangeness

2006-12-18 Thread Jon Smirl
I am using different hardware but that doesn't seem to be the problem. zd1211rw 5-3:1.0: firmware version 4721 zd1211rw 5-3:1.0: zd1211b chip 0ace:1215 v4810 high 00-02-72 AL2230_RF pa0 g--N -- Jon Smirl [EMAIL PROTECTED

[zd1211-devs] Ad-Hoc mode

2006-12-18 Thread Jon Smirl
Is Ad-Hoc mode implemented for the zd1211rw? -- Jon Smirl [EMAIL PROTECTED] - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions

Re: [zd1211-devs] essid strangeness

2006-12-18 Thread Jon Smirl
association request! [ 1515.809289] SoftMAC: associated! -- Jon Smirl [EMAIL PROTECTED] - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions

Re: [zd1211-devs] essid strangeness

2006-12-18 Thread Jon Smirl
: zd_chip_unlock_phy_regs() CR_REG1: 0x20 - 0xa0 [ 1955.656329] zd1211rw 5-3.6:1.0: set_channel() channel 3 [ 1955.969417] zd1211rw 5-3.6:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 - 0xa0 [ 1955.970060] SoftMAC: sent association request! [ 1955.971791] SoftMAC: associated! -- Jon Smirl [EMAIL PROTECTED

Re: [zd1211-devs] essid strangeness

2006-12-19 Thread Jon Smirl
On 12/19/06, Daniel Drake [EMAIL PROTECTED] wrote: Jon Smirl wrote: ifup eth1 [ 1457.671472] SoftMAC: Associate: Scanning for networks first. [ 1457.671487] SoftMAC: Associate: failed to initiate scan. Is device up? You have some configuration agent running which is screwing things up

Re: [zd1211-devs] essid strangeness

2006-12-19 Thread Jon Smirl
On 12/19/06, Daniel Drake [EMAIL PROTECTED] wrote: Jon Smirl wrote: I disabled auto start in /etc/network/interfaces /etc/network/interface is an Ubuntu thing, you want to completely disable whatever is using it. Now I type ifup eth1 and get this trace. Your trace shows that something

Re: [zd1211-devs] essid strangeness

2006-12-19 Thread Jon Smirl
On 12/19/06, Daniel Drake [EMAIL PROTECTED] wrote: Jon Smirl wrote: It looks to me like Ubuntu told the interface to initialize and then told it to associate before the initialization was complete. No - your trace clearly shows that it is setting security keys and trying to associate

Re: [zd1211-devs] essid strangeness

2006-12-19 Thread Jon Smirl
On 12/19/06, Jon Smirl [EMAIL PROTECTED] wrote: On 12/19/06, Daniel Drake [EMAIL PROTECTED] wrote: Jon Smirl wrote: It looks to me like Ubuntu told the interface to initialize and then told it to associate before the initialization was complete. No - your trace clearly shows

[zd1211-devs] A couple of errors

2006-12-21 Thread Jon Smirl
to add ifconfig eth1 up to their ifup scripts. -- Jon Smirl [EMAIL PROTECTED] - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions

[zd1211-devs] Patch to make zd1211rw git build with current kernel

2006-12-27 Thread Jon Smirl
This patch fixes up the zd1211rw git tree to account for the work queue changes in 2.6.20+. -- Jon Smirl [EMAIL PROTECTED] diff --git a/zd_mac.c b/zd_mac.c index 10339f5..ee78cd8 100644 --- a/zd_mac.c +++ b/zd_mac.c @@ -32,14 +32,14 @@ #include zd_util.h static void ieee_init(struct

Re: [zd1211-devs] Patch to make zd1211rw git build with current kernel

2006-12-27 Thread Jon Smirl
On 12/27/06, Jon Smirl [EMAIL PROTECTED] wrote: This patch fixes up the zd1211rw git tree to account for the work queue changes in 2.6.20+. Probably would be best to attach the version of the patch that works. -- Jon Smirl [EMAIL PROTECTED] diff --git a/zd_mac.c b/zd_mac.c index 10339f5

Re: [zd1211-devs] wireless-dev tree problems

2006-12-28 Thread Jon Smirl
On 12/28/06, Daniel Drake [EMAIL PROTECTED] wrote: Jon Smirl wrote: On 12/28/06, Daniel Drake [EMAIL PROTECTED] wrote: Jon Smirl wrote: I couldn't get anything working right with the wireless-dev tree. DHCP wouldn't work on zd1211rw, but the device could hear packets via Wireshark. XGL

Re: [zd1211-devs] Wireshark/kismet dump of problem session

2006-12-30 Thread Jon Smirl
it is pretty obvious why speed if being limited in 54Mb; more than half the packets required multiple retransmissions of the ack from the router. I am using the code from the wireless-dev tree and have ported it to 2.6.20-rc2 (requires changing about 10 lines to adjust for workqueue changes). -- Jon

Re: [zd1211-devs] Wireshark/kismet dump of problem session

2006-12-31 Thread Jon Smirl
On 12/31/06, Daniel Drake [EMAIL PROTECTED] wrote: Jon Smirl wrote: I just spent a while with Windows booted on the same hardware. With no trouble at all I am able to achieve 19Mb/sec of useful file copy throughput. Matching the windows driver behaviour is hard, since we don't have

[zd1211-devs] Experiments with the vendor driver

2006-12-31 Thread Jon Smirl
, it is probably at 48M. I'll add some debug code and see if I can figure out why it can't set a rate over 24M. -- Jon Smirl [EMAIL PROTECTED] - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay

Re: [zd1211-devs] Experiments with the vendor driver

2007-01-01 Thread Jon Smirl
On 1/1/07, Giulio Bottazzi [EMAIL PROTECTED] wrote: On Sun, 31 Dec 2006 18:56:11 -0500 Jon Smirl [EMAIL PROTECTED] wrote: Patch to make the vendor driver, ZD1211LnxDrv_2_16_0_0, build on 2.6.20-rc20. It also fixes what looks to be some definite problems with uninitialized variables. Hi

Re: [zd1211-devs] Experiments with the vendor driver

2007-01-01 Thread Jon Smirl
On 1/1/07, Giulio Bottazzi [EMAIL PROTECTED] wrote: On Mon, 1 Jan 2007 09:01:38 -0500 Jon Smirl [EMAIL PROTECTED] wrote: The INIT work changes went into 2.6.20+, they aren't in 2.6.18. It shouldn't be too hard to fix up the code to work on both releases. You just need to remove the INIT

Re: [zd1211-devs] zd1211rw, ADDRCONF(NETDEV_UP): eth2: link is not ready for 3COM 3CRUSB10075 6891:a727

2007-01-02 Thread Jon Smirl
://lists.sourceforge.net/lists/listinfo/zd1211-devs -- Jon Smirl [EMAIL PROTECTED] - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics

[zd1211-devs] Copy seems to be working, speed is the next issue

2007-01-04 Thread Jon Smirl
:53:21 jonsmirl kernel: [19010.649987] zd1211rw 5-1.4:1.0: zd_mac_rx() Error in packet. This is the code from 2.6.20-rc3 -- Jon Smirl [EMAIL PROTECTED] - Take Surveys. Earn Cash. Influence the Future of IT Join

Re: [zd1211-devs] Copy seems to be working, speed is the next issue

2007-01-04 Thread Jon Smirl
On 1/4/07, Daniel Drake [EMAIL PROTECTED] wrote: Jon Smirl wrote: I just did a 15GB copy test and averaged 13Mb/sec, Windows can copy the same files at 19Mb/sec. It appears that CIFS has higher throughput than SMBFS (10Mb). I think using such a high level protocol for speed tests

Re: [zd1211-devs] Copy seems to be working, speed is the next issue

2007-01-05 Thread Jon Smirl
numbers of retransmission attempts. If there is always the same number of retransmission attempts, it is more likely a bug. -- Jon Smirl [EMAIL PROTECTED] - Take Surveys. Earn Cash. Influence the Future of IT Join

[zd1211-devs] more testing

2007-01-07 Thread Jon Smirl
corruption errors? netcat always generates maximum MTU sized packets. Is there a simple way to generate a bunches of tiny packets? -- Jon Smirl [EMAIL PROTECTED] - Take Surveys. Earn Cash. Influence the Future of IT Join

[zd1211-devs] New error messages in my logs

2007-01-07 Thread Jon Smirl
() Error in packet. Using current Linus source. -- Jon Smirl [EMAIL PROTECTED] - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions

Re: [zd1211-devs] Strange messages from kernel

2007-01-10 Thread Jon Smirl
://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs -- Jon Smirl [EMAIL PROTECTED

Re: [zd1211-devs] Unencrypted packet interface

2007-01-10 Thread Jon Smirl
-devs -- Jon Smirl [EMAIL PROTECTED] - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys

Re: [zd1211-devs] Unencrypted packet interface

2007-01-10 Thread Jon Smirl
On 1/10/07, Andy Green [EMAIL PROTECTED] wrote: Jon Smirl wrote: Hi Jon - The intended effect is that you can simultaneously run your encrypted network connection, keeping your normal traffic and internet connectivity private as usual, and yet also participate in a general, unencrypted

Re: [zd1211-devs] Unencrypted packet interface

2007-01-11 Thread Jon Smirl
On 1/11/07, Andy Green [EMAIL PROTECTED] wrote: Jon Smirl wrote: If you send UDP packets out on a multicast (or broadcast address) under 802.11 there is no MAC level ACK. UDP packets never have TCP level ACKs. So the question is, if an 802.11 device is associated to an AP, can you

Re: [zd1211-devs] Random register corruption bug in reset_mode()?

2007-01-11 Thread Jon Smirl
___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs -- Jon Smirl [EMAIL PROTECTED] - Take Surveys. Earn Cash. Influence the Future

Re: [zd1211-devs] Random register corruption bug in reset_mode()?

2007-01-11 Thread Jon Smirl
On 1/11/07, Andy Green [EMAIL PROTECTED] wrote: Jon Smirl wrote: There have been reports of the driver garbling frames with kismet. This may be the source. Probably not the source of that problem, since reset_mode isn't called very often. Bad data in Monitor mode sounds like frames

Re: [zd1211-devs] Problems loading FW on ARM9 platform

2007-01-13 Thread Jon Smirl
. But that wouldn't be 'free'. Now we have to deal with this user space loading mess and people loading the wrong versions into the device. All of this so that the non-free code can be distributed in a separate .deb file. -- Jon Smirl [EMAIL PROTECTED

Re: [zd1211-devs] Problems loading FW on ARM9 platform

2007-01-13 Thread Jon Smirl
regards Nikolaj -- Jon Smirl [EMAIL PROTECTED] - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief

Re: [zd1211-devs] Problems loading FW on ARM9 platform

2007-01-13 Thread Jon Smirl
device id usb 5-3.5: request_fw_file() fw name zd1211/zd1211b_uphr usb 5-3.5: upload_code() transfer size 4096 usb 5-3.5: upload_code() transfer size 1024 usb 5-3.5: upload_code() firmware confirm return value 0x01 -- Jon Smirl [EMAIL PROTECTED

[zd1211-devs] 802.11a

2007-01-15 Thread Jon Smirl
Do any of the zd1211 based devices do 802.11a? All of the ones I can locate are 11b/g only. -- Jon Smirl [EMAIL PROTECTED] - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel

Re: [zd1211-devs] 802.11a

2007-01-15 Thread Jon Smirl
On 1/15/07, Daniel Drake [EMAIL PROTECTED] wrote: Jon Smirl wrote: Do any of the zd1211 based devices do 802.11a? All of the ones I can locate are 11b/g only. http://zd1211.ath.cx/wiki/RfTypes Which Trendnet device is this referring to? Airoha AL7230B - 802.11a/b/g ΒΆ The AL7230B

Re: [zd1211-devs] 802.11a

2007-01-15 Thread Jon Smirl
On 1/15/07, Jon Smirl [EMAIL PROTECTED] wrote: On 1/15/07, Daniel Drake [EMAIL PROTECTED] wrote: Jon Smirl wrote: Do any of the zd1211 based devices do 802.11a? All of the ones I can locate are 11b/g only. http://zd1211.ath.cx/wiki/RfTypes Which Trendnet device is this referring

Re: [zd1211-devs] 802.11a

2007-01-15 Thread Jon Smirl
On 1/15/07, Uli Kunitz [EMAIL PROTECTED] wrote: Jon, I have a ALLSPOT USB WLAN Finder ALL0298, which should support 802.11a. I has the AL7230 chip. Does it work on 11a? Is there doc and code for using the AL7230? Kind regards, Uli -- Uli Kunitz -- Jon Smirl [EMAIL PROTECTED

Re: [zd1211-devs] anomalous behaviour in handling the WLAN retries

2007-01-16 Thread Jon Smirl
- http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs -- Jon Smirl [EMAIL PROTECTED] - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel

Re: [zd1211-devs] Forcing b mode?

2007-01-16 Thread Jon Smirl
___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs -- Jon Smirl [EMAIL PROTECTED] - Take Surveys. Earn

Re: [zd1211-devs] staus of powersave mode

2007-01-17 Thread Jon Smirl
___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs -- Jon Smirl [EMAIL PROTECTED] - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's

Re: [zd1211-devs] zd1211 on Devicescape

2007-01-22 Thread Jon Smirl
:15:31 Jan 23 00:25:01 jonsmirl kernel: wmaster0: STA 00:11:95:18:15:31 Average rate: 540 (1080/2) -- Jon Smirl [EMAIL PROTECTED] - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel

[zd1211-devs] Working on the dscape driver

2007-01-27 Thread Jon Smirl
spot to separate FCS (CRC errors) from other classes of errors. -- Jon Smirl [EMAIL PROTECTED] - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your

Re: [zd1211-devs] Working on the dscape driver

2007-01-28 Thread Jon Smirl
On 1/28/07, Ulrich Kunitz [EMAIL PROTECTED] wrote: On 07-01-27 22:26 Jon Smirl wrote: In order to learn more about how the zd1211 works I though I could try implementing a few missing functions in the dscape zd1211 driver. The easiest ones looked to be the statistics functions

Re: [zd1211-devs] Working on the dscape driver

2007-01-28 Thread Jon Smirl
adapter. Couldn't this be tracked easily in the firmware? Is it possible to get firmware changes? -- Jon Smirl [EMAIL PROTECTED] - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel

Re: [zd1211-devs] Working on the dscape driver

2007-01-28 Thread Jon Smirl
On 1/28/07, Ulrich Kunitz [EMAIL PROTECTED] wrote: On 07-01-28 12:52 Jon Smirl wrote: On 1/28/07, Ulrich Kunitz [EMAIL PROTECTED] wrote: There is no simple way to count the RTS failures and successes. You could however get all the RTS packets and work from that. However I would regard

[zd1211-devs] gigafast usb dongle and shielding

2007-02-05 Thread Jon Smirl
) and expensive ($30). If the Gigafast dongle gets too close to the cheap DVI cable, it introduces a bunch of sparkle into the screen. No problems from the Dlink again. -- Jon Smirl [EMAIL PROTECTED] - Using Tomcat but need to do

Re: [zd1211-devs] gigafast usb dongle and shielding

2007-02-09 Thread Jon Smirl
On 2/5/07, Jon Smirl [EMAIL PROTECTED] wrote: The zd1211 based Gigafast USB dongles does not appear to be properly shielded. If I get my Dlink wifi link dongle too close to the Gigafast one, the Gigafast one starts receiving all kinds of spurious packets, There is no effect in the other

Re: [zd1211-devs] gigafast usb dongle and shielding

2007-02-09 Thread Jon Smirl
see beacons from any other nets on Channel 1. Only beacons I see that I don't control are on Channel 6. I'm monitoring on Channel 1. -- Jon Smirl [EMAIL PROTECTED] - Using Tomcat but need to do more? Need to support web

Re: [zd1211-devs] zd1211rw ad-hoc support - anyone?

2007-02-14 Thread Jon Smirl
list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs -- Jon Smirl [EMAIL PROTECTED] - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel

Re: [zd1211-devs] Microcontroller for Development board for zd1211.

2007-03-05 Thread Jon Smirl
the wireless net more slowly there are many more less expensive options available. The other solution is to use an 802.11 module with a SDIO interface. Many microcontrollers support SDIO but you'll have to build your own PCBs. SDIO will run the net at full speed. -- Jon Smirl [EMAIL PROTECTED

[zd1211-devs] Gigafast zd1211b for cheap

2007-03-20 Thread Jon Smirl
These are zd1211b based, I already have a couple. I've never seen them for $12 shipped. http://meritline.stores.yahoo.net/gigafast-wireless-lan-usb-adapter.html -- Jon Smirl [EMAIL PROTECTED] - Take Surveys. Earn Cash

Re: [zd1211-devs] ZD1211B in monitor mode only captures Beacon and Probes with Wireshark 99.5 HLP

2007-07-07 Thread Jon Smirl
and your home directory. -- Jon Smirl [EMAIL PROTECTED] - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get

[zd1211-devs] Waking up from suspend

2007-07-09 Thread Jon Smirl
] usb 5-4.5: USB disconnect, address 5 -- Jon Smirl [EMAIL PROTECTED] - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data

[zd1211-devs] Hang on resume

2007-07-12 Thread Jon Smirl
descriptor read/64, error -110 [23771.976000] zd1211rw_mac80211: probe of 5-4.5:1.0 failed with error -110 [23771.976000] usb 5-4.5: USB disconnect, address 7 [23771.976000] PM: Removing info for usb:5-4.5:1.0 [23771.976000] PM: Removing info for usb:5-4.5 [EMAIL PROTECTED]:~$ -- Jon Smirl [EMAIL