Re: [zd1211-devs] SoftMAC: Authentication timed out with AP MAC

2007-11-21 Thread Marco Pracucci 
Hi Daniel,
 -  Zyxel Zyair G-220 (I have patched the driver in order to add its ID
 to 2.6.18)

 I have attached a debug log (zd1211rw debug enabled). I hope it's
 useful.

 Do you have any idea or suggestion?

 Sounds like TX is not working. There's no point investigating this
 unless you are running the latest kernel.
Unfortunatly, I cannot upgrade the kernel... because we have specific
drivers for this board that only works with 2.6.18.

Marco


-
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/
___
Zd1211-devs mailing list - http://zd1211.wiki.sourceforge.net/
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs

Re: [zd1211-devs] SoftMAC: Authentication timed out with AP MAC

2007-11-21 Thread Marco Pracucci 
Hi Daniel,
 Marco Pracucci wrote:
 I have cross compiled the kernel 2.6.23.8 and tested it. The same
 problem occurs and I have attached the system log.
 Do you have any idea, test to do or suggestion?
 See if the device works with a different type of access point.
I have tested with another AP and it does not work.
I have also tried with another wifi adapter (zyxel g-220 instead of
digicom) and the same problem occurs.
 Use another system with a wifi card in monitor mode to confirm or deny
 my suspicion that the device isn't transmitting any frames.
Tomorrow I'll try it.

Marco


-
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/
___
Zd1211-devs mailing list - http://zd1211.wiki.sourceforge.net/
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs

Re: [zd1211-devs] SoftMAC: Authentication timed out with AP MAC

2007-11-21 Thread Marco Pracucci 
Hi Daniel,
 -  Zyxel Zyair G-220 (I have patched the driver in order to add its ID
 to 2.6.18)

 I have attached a debug log (zd1211rw debug enabled). I hope it's
 useful.

 Do you have any idea or suggestion?

 Sounds like TX is not working. There's no point investigating this
 unless you are running the latest kernel.
I have cross compiled the kernel 2.6.23.8 and tested it. The same
problem occurs and I have attached the system log.
Do you have any idea, test to do or suggestion?

Thanks,
Marco Pracucci

Jan  1 00:02:18   user.debug kernel: zd1211rw usb_init()
Jan  1 00:02:18   user.debug kernel: usb 1-1: print_id() 0ace:1215 v4810 full
Jan  1 00:02:18   user.info kernel: usb 1-1: reset full speed USB device using 
ep93xx-ohci and address 2
Jan  1 00:02:18   user.debug kernel: zd1211rw 1-1:1.0: zd_netdev_alloc() 
netdev-flags 0x1002
Jan  1 00:02:18   user.debug kernel: zd1211rw 1-1:1.0: zd_netdev_alloc() 
netdev-features 0x
Jan  1 00:02:18   user.debug kernel: zd1211rw 1-1:1.0: 
zd_chip_read_mac_addr_fw() 
Jan  1 00:02:18   user.debug kernel: zd1211rw 1-1:1.0: probe() successful
Jan  1 00:02:18   user.info kernel: zd1211rw 1-1:1.0: eth1
Jan  1 00:02:18   user.info kernel: usbcore: registered new interface driver 
zd1211rw
Jan  1 00:02:18   user.debug kernel: zd1211rw initialized
Jan  1 00:02:19   user.debug kernel: zd1211rw 1-1:1.0: zd_mac_get_channel() 
channel 0
Jan  1 00:02:19   user.debug kernel: zd1211rw 1-1:1.0: iw_get_range() 
Jan  1 00:02:19   user.debug kernel: zd1211rw 1-1:1.0: zd_usb_init_hw() 
Jan  1 00:02:19   user.debug kernel: usb 1-1: request_fw_file() fw name 
zd1211/zd1211b_ub
Jan  1 00:02:19   user.debug kernel: usb 1-1: upload_firmware() firmware device 
id 0x4810 is equal to the actual device id
Jan  1 00:02:19   user.debug kernel: usb 1-1: request_fw_file() fw name 
zd1211/zd1211b_uphr
Jan  1 00:02:20   user.debug kernel: usb 1-1: upload_code() transfer size 4096
Jan  1 00:02:20   user.debug kernel: usb 1-1: upload_code() transfer size 1024
Jan  1 00:02:20   user.debug kernel: usb 1-1: upload_code() firmware confirm 
return value 0x01
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: zd_usb_enable_int() 
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: zd_usb_enable_int() 
submit urb c036a4c0
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: zd_chip_init_hw() 
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: dump_cr() CR_AFTER_PNP 
0x
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: dump_cr() CR_GPI_EN 
0x
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: dump_cr() CR_INTERRUPT 
0x
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: read_fw_regs_offset() 
fw_regs_base: 0xf772
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: read_pod() E2P_POD 
0x8584
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: read_pod() RF AL2230_RF 
0x4 PA type 0x0 patch CCK 1 patch CR157 0 patch 6M 0 new PHY 1 link LED2 tx led 
1
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: hw_init() 
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: zd1211b_hw_reset_phy() 
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() 
CR_REG1: 0x00 - 0x00
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: 
zd_chip_unlock_phy_regs() CR_REG1: 0x00 - 0x80
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: zd1211b_hw_init_hmac() 
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: get_aw_pt_bi() aw 0 pt 0 
bi 0
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: set_aw_pt_bi() aw 0 pt 
99 bi 100
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() 
CR_REG1: 0xa0 - 0x20
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: zd_usb_rfwrite() value 
0x0241000 bits 24
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: 
zd_chip_unlock_phy_regs() CR_REG1: 0x20 - 0xa0
Jan  1 00:02:20   user.info kernel: zd1211rw 1-1:1.0: firmware version 4725
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: dump_fw_registers() 
FW_FIRMWARE_VER 0x4725
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: dump_fw_registers() 
FW_USB_SPEED 0x
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: dump_fw_registers() 
FW_FIX_TX_RATE 0x
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: dump_fw_registers() 
FW_LINK_STATUS 0x
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: dump_cr() CR_AFTER_PNP 
0x0001
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: dump_cr() CR_GPI_EN 
0x
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: dump_cr() CR_INTERRUPT 
0x
Jan  1 00:02:20   user.info kernel: zd1211rw 1-1:1.0: zd1211b chip 0ace:1215 
v4810 full 00-02-72 AL2230_RF pa0 g--NS
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: zd_read_regdomain() 
regdomain: 0x30
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: regdomain 0x30
Jan  1 00:02:20   user.debug kernel: zd1211rw 1-1:1.0: zd_usb_disable_int() urb 
c036a4c0 killed
Jan  1 00:02:20