26.04.2010 22:40, Rich Rauenzahn wrote:
[]
> This is after bootup...
>
> ]$ dmesg | grep zd12
> zd1211rw 1-1:1.0: phy0
> usbcore: registered new interface driver zd1211rw
> usb 1-1: firmware: requesting zd1211/zd1211b_ub
> usb 1-1: firmware: requesting zd1211/zd1211b_uphr
> usb 1-1: firmware: requesting zd1211/zd1211b_ub
> usb 1-1: firmware: requesting zd1211/zd1211b_uphr
> zd1211rw 1-1:1.0: couldn't load firmware. Error number -110
> [r...@rich-fedora trunk]$
>
> $ sudo ifup wlan0
> RTNETLINK answers: Connection timed out
>
> Determining IP information for wlan0...RTNETLINK answers: Connection timed out
>
> This is caused by the ifup:
>
> usb 1-1: firmware: requesting zd1211/zd1211b_ub
> usb 1-1: firmware: requesting zd1211/zd1211b_uphr
> usb 1-1: USB control request for firmware upload failed. Error number -110
> usb 1-1: Could not upload firmware code uph. Error number -110
> zd1211rw 1-1:1.0: couldn't load firmware. Error number -110
> usb 1-1: firmware: requesting zd1211/zd1211b_ub
> usb 1-1: firmware: requesting zd1211/zd1211b_uphr
> usb 1-1: USB control request for firmware upload failed. Error number -110
> usb 1-1: Could not upload firmware code uph. Error number -110
> zd1211rw 1-1:1.0: couldn't load firmware. Error number -110
> usb 1-1: firmware: requesting zd1211/zd1211b_ub
> usb 1-1: firmware: requesting zd1211/zd1211b_uphr
> usb 1-1: USB control request for firmware upload failed. Error number -110
> usb 1-1: Could not upload firmware code uph. Error number -110
> zd1211rw 1-1:1.0: couldn't load firmware. Error number -110
I've seen very similar behavour out of my former device.
At first (when I unpakced and plugged it for the first
time) it were initialized and worked. But after a re-plug
it stopped working with lots of -110 errors (which is USB
timeout) while loading various pieces of firmware, like on
the above example. Since that I were never able to run it
again, not even on windows, not on any of our machines.
So I returned it back to the store, where the techie tried
to verify my claims by attempting to install it into their
windows machine - with similar effects, it stopped when
trying to initialize (their windows drivers does not have
any timeouts apparently so it just sits here with hourglass
mouse cursor until reset). A replacememnt I bought works
just fine for more than 2 years.
I'm not saying that you have broken piece of hardware, I'm
merely expressing my own expirence :)
/mjt
--
___
Zd1211-devs mailing list - http://zd1211.wiki.sourceforge.net/
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
