KiB) TX bytes:295052 (288.1 KiB)
Interrupt:17 Memory:fa00-fa012800
-Messaggio originale-
Da: Emilio Campos [mailto:emilio.campos.mar...@gmail.com]
Inviato: lunedì 4 luglio 2011 22.09
A: zenloadbalancer-support@lists.sourceforge.net
Oggetto: Re: [Zenloadbalancer-support
-Original Message-
From: Emilio Campos [mailto:emilio.campos.mar...@gmail.com]
Sent: July-11-11 1:46 PM
To: zenloadbalancer-support@lists.sourceforge.net
Subject: Re: [Zenloadbalancer-support] Feature request
Hi Dave, We going to add your suggestion for future developments
Hi Dave? was your doubt solved? did you tested farmguardian?
I'm waiting your feedback
Regards!
2011/7/11 Emilio Campos emilio.campos.mar...@gmail.com:
I suggest check_http (this script searchs a string on a html request
output), at the moment is your solution:
Example for check_http
/connect.png]
0
[image: https://142.183.191.243:444/img/graphs/barFarm1-3.png]0 (0%)
0
0
0.00
0.00
0
0
** **
** **
Ideas ?
** **
Dave
** **
-Original Message-
From: Emilio Campos [mailto:emilio.campos.mar...@gmail.com
Hi folks!
We're glad to announce the next release candidate for Zen Load
Balancer v1rc4. This release is a hugh step to build a more stable
product, in which a lot of bugs detected these months are fixed.
All of you that have already the v1rc1/2/3 installed, it's save to
upgrade from apt. Also,
if
it is going to be a while I will go ahead and go live without it.
Thanks again.
Dave
-Original Message-
From: Emilio Campos [mailto:emilio.campos.mar...@gmail.com]
Sent: July-31-11 6:11 PM
To: zenloadbalancer-support@lists.sourceforge.net
Subject: [Zenloadbalancer-support] zen
Hi Stefano, Thanks about your test, and still not on vacation, soon, the end
of this next week lol
We are working for solve the issues reported by you and Dave, will be added
on the new release, with improvements like a new concept: profiles, for
advanced configuration with http and https
Read down on my lines, I added a possible solution for your problema about
VIP, try next time, and tell us if this problem is solved.
And by other hand, The only one way for delete configuration on zen is with
a bad configuration cluster or manualy (but this isn't detected on logs), if
you
that ucarp can run. I will check if ucarp
supports multiple subnets and update here.
Thanks for responding this quick!
--
*From:* Emilio Campos emilio.campos.mar...@gmail.com
*To:* Sanket Gajjar gajjarsan...@yahoo.com;
zenloadbalancer-support@lists.sourceforge.net
Hi guys!
We're pleased to announce the new version of zenloadbalancer v1rc5, which
it's possible to be updated through the apt repository, not via iso image.
The changelog of this release is the following:
BUG fix:
- when ifup is executed, try to create the interface first
- MAC
verification failed[image:
Description: https://grp-zen-02s:444/img/icons/small/accept.png].
*Global status: **[image: Description:
https://grp-zen-02s:444/img/icons/small/exclamation.png]*
* *
David
** **
*From:* Emilio Campos [mailto:emilio.campos.mar...@gmail.com]
*Sent:* 10 October
to upgrade our existing
zen servers to this version, or is the only way to download and install the
new iso?
** **
Regards
Alex Price
Technical Manager
** **
*From:* Emilio Campos [mailto:emilio.campos.mar...@gmail.com]
*Sent:* 21 November 2011 10:55
*To:* zenloadbalancer
/index.php?id=3
Updates section.
Regards!
2011/11/21 Emilio Campos emilio.campos.mar...@gmail.com
Alex at this moment no, we are working for do this property over apt-get
update, upgrade only if you are interested on change from stable to
release candidate on producction environment
Regards
Read my lines down
Regards!
2011/11/23 Mirko Brankovic mirkobranko...@yahoo.com
Hello everyone,
I'm new to ZenLB and i'm having some trouble setting it up correctly, so
i'm wandering if i can get some help?
I've installed v1 stable version, and on virtual machine by mistake v2rc1,
and i'm
and 43) are diferent, they are your zen
cluster architecture
And about RSA connection, it is needed for configure your zen cluster, not
for configure farms.
Thanks,
Mirko
--
*From:* Emilio Campos emilio.campos.mar...@gmail.com
*To:* Mirko Brankovic
Steve, after send this mail I though that maybe you use v1stable, on this
case, there is not button to force failover, you have to invent a
workaround that force the switching, quickly disconnection of nic cable.
This is a bad workaround but It can solve your problem.
2011/12/13 Emilio Campos
David Checks the comunication between zenlb and your backend, Zen LB try to
connect to tcp backend port, if this connections fails, zenlb mark this
backed like DOWN, also you can check your backend logs.
Regards!
2011/12/19 David Eisenbacher david.eisenbac...@discoverready.com
Hello
more info please. I see 3 diferent networks on your envirnoment:
PRIVATE:
network address?
netmask?
gw?
DMZ:
network address?
netmask?
gw?
FARMS:
network address?
netmask?
gw?
p.s.: why the gw on the backends is the zenlb IP?
Regards!
2012/1/17 Johnny Handsome bsc...@hotmail.com
hello,
HI, It's not possible only with a LB, you have to configure some mysql
service, mysql replication active/active is the best way I think.
Configure mysql replication service and configure one tcp farm on zen with
both mysql nodes, use the virtual ip on zen to configure on your apps that
need
Hi Jhonny I checked your architecture and zenlb configuration and all is
fine.
Is this architecture the best?. We would discuss with a lot of mail about
this idea, but I can tell you that like best practices: Zen at the moment
works like sNAT method, for this is recommended that the virtual IP
connections were very
responsive as well as the DNS service I was load balancing.
** **
*From:* Emilio Campos [mailto:emilio.campos.mar...@gmail.com]
*Sent:* Monday, January 16, 2012 1:56 PM
*To:* zenloadbalancer-support@lists.sourceforge.net; ANBORCAM ..
*Subject:* [Zenloadbalancer-support
Hi Stephen, the list support attached, your signature for example.
About your first issue, at the moment there isn't dev group list, feel free
this list for send ideas, feedback, etc.
About your second issue. Feel free for contribute with your own code, at
the moment there isn't public svn, the
HI GUYS!
There is a bug reported by other member of the list, it's shown on the
planning as:
[gui] No connections appears for status backends when the farm is started
over a virtual interface
And It's fixed on the next v2rc2
Can you confirm that your problem happen configuring a farm with
Hi Johnny, could you send us some screenshot showing the problem?
About your help with php, we considerate for new developments.
Thanks and regards!
2012/1/25 Johnny Handsome bsc...@hotmail.com
My config is *Farm Virtual IP *direct no sub-device (ethx)
I'm liking this product very much. If
Hi Rudy, we are going to include this feature on v3, a entire
implementation of LV4 load balancing
Regards!
2012/1/27 Rudi Vos ru...@brandid.eu
Thanks for a wonderful product,
I would like to request a new feature : Direct Server Return
** **
** **
Hi nick.
First, you shouldn't use apt-get upgrade. This command upgrade your
operative system and we desn't want that
I checked the repository and reupdated the packages. Now from my operative
system
root@lb-2:/home/powit/Desktop/v2# apt-get update
Obj http://ftp.debian.org stable Release.gpg
Hi Johnny, like you tell in your mail, looks like a problem between zen and
backends, maybe comunications or other issue.
The error that you report it is the default error message of http profile
when it can't connect to any backend.
Have you tried to connect from zen lb to your backends?
Nick, for the next time, before restarting It could be very useful to know
the number of active connections , the max value and used value in manage
farm section of farm is failing:
Table with header Active connections257 max, 0 used, 0 last
Other question, is there a firewall between your
Hi Nick, At the moment we aren't going to develope a method to indicate the
users that a backends or a farms are down. As Marco wrote in other mail it
is work for your monitoring solution. But by other hand I think that your
proposal of indicate the backend status (how many are dead, how many are
Nick this line is part of zenloadbalancer.log, this file shows the actions
that the users run in the web gui:
Tue Feb 21 13:54:12 2012 (date) - * (interface that is running zen webgui
- 192.168.10.134 (ip client that connect to gui) - admin (user that
connected via http) - running
Nick, there is not connection limit in http(s) farms proflles. witch type
of farm and protocol is not working fine for you?
I think your (tcp) farm is in the maxconnections limits, please update this
value or change to other profile if it is possible.
We developed a http(s) profiles because
: Contents of Zenloadbalancer-support digest...
Today's Topics:
1. Re: Zenloadbalancer-support Digest, Vol 15, Issue 40
(Emilio Campos)
--
Message: 1
Date: Wed, 22 Feb 2012 08:34:41 +0100
From: Emilio Campos
]
Emilio Campos emilio.campos.mar...@gmail.com 28/02/2012 11:22
Hi Zen Masters! We're proud to announce the new V2rc3 release which
includes some great and useful features that many of you had requested
these last weeks and some reported bugs solved.
I would like to emphasize the great
.
*From:* Emilio Campos emilio.campos.mar...@gmail.com
*Sent:* Thursday, February 23, 2012 7:07 AM
*To:* Joe McCorkle j...@joemccorkle.com ;
zenloadbalancer-support@lists.sourceforge.net
*Subject:* Re: [Zenloadbalancer-support] Zenloadbalancer-support Digest,
Vol 15, Issue 45
Joe, repeat
you decide
that they’re a good idea.
Thank you again for your hard efforts of making Zen a viable open source
alternative to many expensive commercial solutions!
** **
Sincerely,
Andreas Iwanowski
** **
*From:* Emilio Campos [mailto:emilio.campos.mar...@gmail.com
Hi guys, Andy is right, clients will be redirected to other backend when
their time to limit session is finished
Nick, if you need disable a backend and disconnet to users without wait the
time then you can change the backend port, session clients will be forced
to close and zen lb is not going
Not implemented
Regards
2012/3/9 Jaume Ponsa ja...@calidae.com
How can zlb alert by email if one real server fails?
Tnks
Jaume
--
Virtualization Cloud Management Using Capacity Planning
Cloud computing
You have to change nothing in your repository configuration.
V3 not yet initiated (as far as I know :P ). We are working with the last
version: v2rc3.1, you have to update to this trough apt, normal way.
See you!
http://zenloadbalancer.sourceforge.net/apt/x86/v3/Packages.gz ERROR
Wooowww zen gui0.1 has more years that the sun. This is the first version
(a hard installation procedure). For change the admin password you have to
use htpasswd binary with /usr/local/zenloadbalancer/www/.htaccess file
Read the help of htpasswd.
p.s.: My recomendation: Update as soon as posible
Hi David.
Read down my lines
Regards!
2012/3/22 David Martin (IT) dmar...@jpress.co.uk
Hi all,
** **
It’s been a while since I’ve had time to work on configuring Zen for our
RDP App server farms but I’m back on it now and could do with some advice
on the latest version. I have
:* Emilio Campos [mailto:emilio.campos.mar...@gmail.com]
*Sent:* 23 March 2012 08:39
*To:* zenloadbalancer-support@lists.sourceforge.net
*Subject:* Re: [Zenloadbalancer-support] Auto Failback
** **
Hi David.
Read down my lines
Regards!
2012/3/22 David Martin (IT) dmar
Hi zen masters!
Nick, as Stephen explained in his mail and as Laura commented in her last
one mail, there is no problem with the memory usage in the system, it is
normal functionality.
By other hand, the new version in the v2 line has date:
bit package...
Am I completely off base here?
Bryan
On Wed, 2012-03-07 at 21:32 +0100, Emilio Campos wrote:
Hi guys!
I would like to know if some member of the list is working with Zen
Load Balancer running in Xen Server with Paravirtualized mode. In the
affirmative case, can report
How did you install v2rc3.1 Robby?
run this command in a shell and paste the output:
dpkg -l | grep zenloadbalancer
The problem that you describe in tcp profiles is solved in v2rc3.1 I'm
sure, Christian reported it.
Regards
2012/4/1 Robby Pedrica rpedr...@xstore.co.za
On 03/31/2012
Hi Robby, did you detect if the overload is such with other farms or only
with udp farms?
There is some issue detected with zlb and virtualization (tw_recycle
parameter for sysctl.conf). In the stable v2 this value will be disabled,
but this value produce overload in the operative system
Hi Andrew, I am not a expert with vmware, but I just readed you comment, I
think maybe there is some connection problems with your 2nd vNIC.
Maybe this diagram could help you for understand how zlb cluster works:
http://www.talking-it.com/wp-content/uploads/2011/09/ZLB-cluster-config.jpg
It's
Hi Andrew, if you want to disable ssl 2.0 you need to use ciphers. Select
custom security, and modify the ALL value in Customize your ciphers.
textbox, maybe something like this in place of ALL string could help you:
HIGH:!SSLv2:!ADH:!aNULL:!eNULL:!NULL
If not, you have to play with ciphers
Apt will be updated as soon I arrive at home Andrew ;) (3 or 4 hours max) ,
this is the reason because we doesn't sent the information mail.
2012/4/10 Andrew Schmitt andrew.schm...@clippermagazine.com
Congratulations on the new version. Any issues upgrading from RC 3.1
we should know
Hi Gregory, I just readed your mail and I just take a look to your
configuration cluster type, the failover should work and the node1 should
be configured like master automaticaly.
We are going to do some tests and if we detect some issue, it will be
marked like a bug (level: not critical).
?
-Andy
-Original Message-
From: Laurent Bardi [mailto:laurent.ba...@ipbs.fr]
Sent: Monday, April 16, 2012 8:28 AM
To: Emilio Campos; zenloadbalancer-support@lists.sourceforge.net
Subject: Re: [Zenloadbalancer-support] cluster with 3 machines ?
Emilio Campos a écrit
Advanced checks with farmguardian only enables with TCP profiles at the
moment.
By default a check is launched for each backend (in all farm profiles): if
it is opened destination port.
Regards
2012/4/16 Nick Furnell nick.furn...@transform-medical.co.uk
Hi Andy
I am using FarmGuardian to
.jpg
Regards!
2012/4/16 Laurent Bardi laurent.ba...@ipbs.fr
Emilio Campos a écrit :
Hi guys, some clarifications:
1º Cluster Active / Pasive related with Zen Servers, It is a service
used to make HA between zen appliances, two servers (and only two)
work together with UCARP protocol
I reply down in your lines.
2012/4/16 Andreas M. Iwanowski namez...@afim.info
Dear Zen folks.
** **
I have to follow up with another question about UDP load balancing.
I’m trying to balance 3 RADIUS backends.
However, in UDP mode, Zen NATs the package and sends it off with
Is OpenVswitch used for virtualization products?, there isn't sense to use
openvswitch with zenlb, you can use it in virtualized mode (on this case
your virtualized infraestructure will use oopenvswitch) or phisical.
If you want to use a phisical interface with any logical interfaces I
Nick Solved in v2rc3.1 and v2stable , this is a bug regresion.
from www.zenloadbalancer.com / documentation section:
bug regression fixed: Farms stop if the concurrent connections are
configured with a value highest than 512.
To solve this issue in your farm: open
Hi Nick, This isn't a permanent change in the update process, It is
because we wrong in the version name definition, the apt server thinks
that you are downgrading from v2rc3.1 to v2stable.
We are going to try solve this issue, naming with correct way the new
versions to allow the natural
Hi Koen, please take a look to this archived mail that explains how
farmguardian and zen work.
http://sourceforge.net/mailarchive/forum.php?thread_name=BLU164-W39A7180399A764E10E6183C7280%40phx.gblforum_name=zenloadbalancer-support
And then you confirm us that after 30 seconds of recovery and
By the moment: button put in maintenance mode in edit the xxx farm
Regards
2012/5/9 Nathan nat...@manageddatasolutions.com.au
There’s been a couple of requests for a ‘drain farm or drain virtual
host/server’ feature… I’d second a request to get that added to the v3
development
am not a developer, I am a system admin so
hopefully I can still do it unless, it needs heavy coding.
** **
I feel this product/setup can be very useful for the mainframe Linux
community if we can port it.
** **
Sagar
** **
** **
*From:* Emilio Campos
Please send me your configuration farm file in:
/usr/local/zenloadbalancer/config/ZLB-EXCH-HUB_pen.cfg
confirm that your zlb version is v2 stable, also be sure that the
configuration farm includes farmguardian configured with the issue that
you write below.
Regards
2012/7/17 tibz
Hi tibz, I attach you a farmguardian script with some line of code added
to include more information in the log, please make a copy of original
farmguardian in
/usr/local/zenloadbalancer/app/farmguardian/bin/farmguardian and put here
my attached file, be sure that the new file has execution
tibz Also you need that your zen server is configured with a ntp server
correctly. to sync date with ntp server there is a filed in the gui :
Setting Server ntp server
you can confirm in command line that the sync is ok with:
#ntpdate ntpserver
Regards
2012/8/2 Laura Garcia nev...@gmail.com
and will confirm again afterward that it definitely fix the
logging issue I had or not.
Thanks
tibz
On 26/7/2012 9:58 PM, Emilio Campos wrote:
Refering farmguardian:
I attached a farmguardian file with a patch. This creates a log file if it
doesn't exist or if the farmguardian log rotates
(0)2133 2969 69
awato Software GmbH | Salm Reifferscheidt Allee 37 | D-41540 Dormagen
*avisor-Support* | T: +49 (0)621 6094 043 | F: +49 (0)621 6071 447
[image: awato Software GmbH]
Geschäftsführer: Ursula Iwanowski | HRB: Neuss 7208 | VAT-no.: DE 122796158
*From:* Emilio Campos
Hi Zen Masters!
After some waiting months designing and developing the new features of Zen
LB, we're proud to announce the brand new testing version 3.0-rc1 which
include less features than we would like, but we've been targeted to mainly
3 aspects:
1.- Farm Guardian expansion: from TCP farms,
be great for
us to use common hardware.
I assume the install routing doesn't need a VGA port, but can redirect
output to Serial?
From: Emilio Campos [mailto:emilio.campos.mar...@gmail.com]
Sent: Saturday, August 18, 2012 11:59 AM
To: zenloadbalancer-support@lists.sourceforge.net
Subject: Re
Hi, Your configuration isn't fine
What kind of farm are you trying to configure?
If you are working with l4xunat or l4tnat with DNAT mode you need that the
gw of backends are the load balancer. With this configuration the load
balancer woks in transparent mode.
If you are working with other type
Maybe the attached image could help to understand DNAT mode requeriments
added in the last release
Myles I understand that you are trying to configure this method.
Regards
2012/8/21 Emilio Campos emilio.campos.mar...@gmail.com
Hi, Your configuration isn't fine
What kind of farm are you
Hi Andrew
1)
By default HTTP profile includes the X-Forwarded for header
2)
This is a normal action, in TCP profiles with SSL the entire communication
between client and backend is encripted, for this reason the load balancer
can't include or modify the x-fowarded-for header
In HTTPS farms the
Hi Myles the first of all what kind of profile are you using with zen? HTTP
profile? HTTPS profile? TCP profile?
if you use HTTPS profile try the next:
open your configuration farm file in
/usr/local/zenloadbalancer/config/yourfarmname_pound.cfg
Search a line like this:
RewriteLocation
.
myles.
On 8/29/12 2:41 AM, Emilio Campos wrote:
Hi Myles the first of all what kind of profile are you using with zen?
HTTP profile? HTTPS profile? TCP profile?
if you use HTTPS profile try the next:
open your configuration farm file in
/usr/local/zenloadbalancer/config
How many servers do you have and how many concurrent connection manage
each server? what version do you work with?
2012/8/30 Daniel Ribelin dan...@iglobalnetworks.com
Hello ZLB.
I was wondering if there is a 64-bit version in the works or plans? I
would like to increase the size of our
Steve it isn't a zlb version problem because the binary that do the load
balancing is the same in both. It sounds like a network issue.
p.s.: You don't see down the backends in the moment that you run the farm
because the lb only checks backends in the moment that it has to send a
connection to
2012/9/23 David Romero dr.vicl...@gmail.com
Hi all,
I'm new to Zenlb and my experience in networking is limited. I've been
testing the product and it seems great. But I have 2 questions:
1- Which is a recommended network configuration for the zenlb?
Something like a general best-practice
.
Yesterday I was testing to use a datalink profile as a way to get
internet access through a zlb from my internal server, but it didn't
work. I suspect because of non-snat/masquerading at zlb.
I will try the new v3rc1.
Regards,
On Mon, Sep 24, 2012 at 8:58 AM, Emilio Campos
Hi Myles, I understood reading your mail that you are working with zen load
balancer in a virtual machine, please can you send me what kind of
virtualization architecture are you working with? Xen, Vmware, HyperV? In
any case you need to be installed in the vm the xen tools vmware tools or
Hi for v2
http://sourceforge.net/mailarchive/forum.php?thread_name=9AB8E944212F3B43B85B4CBACB89417C2352CC02%40mcdos.erko-holdings.netforum_name=zenloadbalancer-support
For v3 there is a new field named redirect in http[s] profiles to do
this.
My personal recomendation: if you need http[s]
Hi Zen Masters.
Some vulnerabilities has been discovered in the last week and they have
been reported to the zen developer team through bug tracker as medium
severity. For this reason they are going to be solved in the next release.
The reported bug is explained here:
On any case please enable logs and paste us output with errors
P.S: we are waiting your feedback.
Regards
2012/10/15 Richard Rogers rich...@rogersuk.me.uk
I don't think it is a file size issue, but an aspx page size issue when
going through the load balancer.
Another issue I am also having
Server0 and Server1 have the same ip and same port. Is it a mistake
writing the mail ?
Regards
2012/10/25 Werner Hauptfleisch whauptflei...@gmail.com
Hi Everyone,
I have been working with Zen Load Balancer (V.2, latest stable release)
and have been trying to configure a simple server farm
you are connecting to zlb webgui to 444 (ssl support) port. Your proxy
server has to allow connections to this port, by default proxy servers only
allow 80 and 443, not 444 in SSL
Regards
2012/10/29 Johnny Handsome bsc...@hotmail.com
Hi,
Don't know what happened... but all of a sudden I
Hi nick, it's very strange because in the v3rc1 we didn't modify TCP farms,
maybe some modifications in farmguardian functions that it could affect in
some case the TCP farm, but as you said clearly it also happen when you
disable farmguardian.
We need to know why tcp farm goes down. When you
* for the existence of a VHID
in a subnet during the ZLB installation phase? Maybe a fix for the new
version??
I am not sure what you want from me regarding the two farms? The TCP farm
went down, but the HTTP profile was still working fine - what do you need.
Thanks
Nick
Emilio Campos
1. For tcp profiles Zen checks by default if tcp port is opened in backends
in all conections. If you enable farmguaridan you can run advanced checks
and it is managed by an escheduler
2. If you want to run the lb without proxy at this moment only it is
possible in l4 farms (v3rc1)
El 07/11/2012
Yes it's possible, but it should be cool if you could explain more about
the architecture you are talking about
Regards!
2012/11/10 Manish Rane manish...@gmail.com
Hi Folks,
I am trying to setup SMTP redundancy at ISP level and have two links
terminated on firewall. Wanted to know if we
Fabien if you want to redirect with v2stable you have to use html in
error500. In last mails we spoke about that.
If you want to redirect with v3rc1 there is a dedicate field to do this.
Add a service into a HTTP[S] farm.
About x-forwarded-port header, I think you don't need it, you can configure
Hi Pound 2.5 and 2.6 (stable) use the same directives, in some case 2.6 add
new directive, all should work like a charm if you update to 2.6. Pound 2.7
is declared as unstable at this moment.
In new releases this will be updated.
Regards
2012/11/22 Ionut elo...@xd.ro
Hi,
Would be nice to
Hi, in v3 there is a new field in HTTP[S] farms, named service, you can add
services and make load balancing in base of urls.
I hope this help you
Regards
2012/12/6 Lazuardi Nasution mrxlazuar...@gmail.com
Hi,
How to load balance HTTP traffic regulated by HTTP Method? I have 3
backend
code like 500,
501, 503 or 414
2012/12/7 ankush grover ankushcen...@gmail.com
On Fri, Dec 7, 2012 at 3:23 PM, Emilio Campos
emilio.campos.mar...@gmail.com wrote:
I reply below
I think there is a problem of misconfiguration, I hope this help you
2012/12/6 ankush grover ankushcen
There isn't an official way to update from v2 stable to v3, if you want you
can download the iso and save it the zenloadbalancer deb package and
dependencies.
About put and get url I give you a quick idea:
GET url:
http://yourweb.com/index.php?varible1=value1variable2=value2variable3=value3
PUT
the health of Farm and can detect the failure
and route away from failed host.
I really think this is much needed configuration since it already has farm
guarding available.
Let me know if you guys would like to discuss further.
On Mon, Dec 10, 2012 at 5:08 PM, Emilio Campos
emilio.campos.mar
reinstall nagios-plugins:
apt-get install nagios-plugins --reinstall
copy check_ldap script from package directory to zen script directory
cp /usr/lib/nagios/plugins/check_ldap
/usr/local/zenloadbalancer/app/libexec/
If you take a look in /usr/local/zenloadbalancer/app/libexec/ you're going
Still no luck...
--
Thanks and Regards,
Manish R
On Mon, Dec 17, 2012 at 1:28 PM, Emilio Campos
emilio.campos.mar...@gmail.com wrote:
apt-get install nagios-plugins --reinstall
we need to meet compliance, and I'm having
trouble getting this configured to meet the standards.
thanks.
myles.
On 11/22/12 8:29 AM, Emilio Campos wrote:
Hi Pound 2.5 and 2.6 (stable) use the same directives, in some case 2.6
add new directive, all should work like a charm if you update
Hi Peter,
If you are working with v3rc version: There is a field in HTTP profile
named service, enter here a descriptive name, with this you will see a
new table with the header service 'yourservicename' , in this table
you're going to see a field named Redirect; that is your field! ;)
If you
of it...without the patch.
thanks.
myles.
On 1/8/13 10:43 AM, Emilio Campos wrote:
Hi Myles, we didn't work yet in 2,6 version but if my memory isn't failing
the threads management of pound for this version have been changed and
there is a directive to indicate the number of threads that pound
I'm running a zen load balancer v2 (32bits) in Xen Server environments with
kernel bigmem and 8GB of ram and it's working like a charm.
2013/1/11 Daniel dan...@iglobalnetworks.com
That is because it is 32 bit which only uses four gigs RAM.
Myles Merrell mmerr...@demosphere.com wrote:
I'm
Personaly I don't understand your question very well, but zen can works in
HTTPS mode.
It receives connections and send request to clients in HTTP. is that you
mean? In that case you can do your own test wiht HTTPS profile, use a test
certificate (you can obtain one in zen for this purpose by
More information would be appreciated ;)
2013/1/16 Grant Brown pcbo...@gmail.com
Hey guys
Love the load balancer it I am having some problems with FTP
Any tips ?
Thx
Grant
Sent from my iPad
--
Master Java
Thanks for your feedback.
The bug that you comment will be solved in the next release in a few days
Thanks again
2013/1/21, y l ypsli...@yahoo.com:
Hi Steve,
First of all, I would to thank the Zen LB creators and team for making
available a rock solid Load Balancer even the Cisco LB could
1 - 100 of 388 matches
Mail list logo