The drives I just bought were half packed in white foam then wrapped
in bubble wrap. Not all edges were protected with more than bubble
wrap.
Same here for me. I purchased 10 x 2TB Hitachi 7200rpm SATA disks from
Newegg.com in March. The majority of the drives were protected in white
foam.
I have found this post from Mike La Spina to be very detailed covering this
topic, yet I could not seem to get it to work right on my first hasty
attempt a while back. Let me know if you have success, or adjustments that
get this to work.
A word of caution on the Silicon Image 3124. I have tested out a two
extremely cheap card using the si3124 driver on b134 and OIb147. One card
was PCI, the other PCI-X. I found that both are unusable until the driver
is updated. Large'ish file transfers, say over 1GB would lock up the
machine
Sorry i'm not able to provide more insight but I thought some of the
concepts in this article might help you, as well as Mike's replication
script, also available on this page:
http://blog.laspina.ca/ubiquitous/provisioning_disaster_recovery_with_zfs
You also might want to look at InfraGeeks
Hi Cindy,
I did see your first email pointing to that
bughttp://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6538600.
Apologies for not addressing it earlier. It is my opinion that the behavior
Mike, and I http://illumos.org/issues/217 (or anyone else upgrading pools
right now) is seeing
Well strangely enough, I just logged into a OS b145 machine. It's rpool is
not mirrored, just a single disk. I know that zdb reported zpool version 22
after at least the first 3 reboots after rpool upgrade, so I stopped
checking. zdb now reports version 27. This machine has probably been
We have two Intel X25-E 32GB SSD drives in one of our servers. I'm using
one for ZIl and one for L2ARC, we are having great results so far.
Cheers,
-Chris
On Wed, Sep 15, 2010 at 9:43 AM, Richard Elling rich...@nexenta.com wrote:
On Sep 14, 2010, at 6:59 AM, Wolfraider wrote:
We are
Not sure what the best list to send this to is right now, so I have selected
a few, apologies in advance.
A couple questions. First I have a physical host (call him bob) that was
just installed with b134 a few days ago. I upgraded to b145 using the
instructions on the Illumos wiki yesterday.
Can anyone elaborate on the zpool split command. I have not seen any
examples in use am I am very curious about it. Say I have 12 disks in a
pool named tank. 6 in a RAIDZ2 + another 6 in a RAIDZ2. All is well, and
I'm not even close to maximum capacity in the pool. Say I want to swap out
6 of
, Richard Elling rich...@nexenta.com wrote:
On Sep 13, 2010, at 4:40 PM, Chris Mosetick wrote:
Can anyone elaborate on the zpool split command. I have not seen any
examples in use am I am very curious about it. Say I have 12 disks in a
pool named tank. 6 in a RAIDZ2 + another 6 in a RAIDZ2. All
10 matches
Mail list logo
