Den 14.06.2011 14:06, skrev Edward Ned Harvey:
From: zfs-discuss-boun...@opensolaris.org [mailto:zfs-discuss-
boun...@opensolaris.org] On Behalf Of Rasmus Fauske
I want to replace some slow consumer drives with new edc re4 ones but
when I do a replace it needs to scan the full pool and not only
Hi,
I want to replace some slow consumer drives with new edc re4 ones but
when I do a replace it needs to scan the full pool and not only that
disk set (or just the old drive)
Is this normal ? (the speed is always slow in the start so thats not
what I am wondering about, but that it needs to
the controller.
The performance is ok, I am using it with 8 x 1 TB seagates and it has
been working with monitoring, 3dmd and all but if I was going to do it
again I had choosen a adaptec or lsi controller so I could run the OS
from the drives on the controller.
--
Rasmus Fauske
EasyISP.no
d the OS and
reconfigured the COMSTAR stack from scratch.
How large are the volumes you are creating ? In my setup vSphere could
not see the volume if it was above 2000GB
I am running b118 with comstar and vSphere and that works great. Using
file backed iscsi luns (thin provisioned)
--
R
c9t6d0 ONLINE 0 0 0
c9t7d0 ONLINE 0 0 0 1,02T resilvered
This time as you can see it is 0 checksum errors during the resilvering.
Is it something with the build I am using ? (118)
--
Rasmus Fauske
Markus Kovero skrev:
We've noticed this beha
ONLINE 0 0 0
c9t11d0 ONLINE 0 0 0
cache
c8d1ONLINE 0 0 0
errors: No known data errors
Is this normal and will it complete ?
-
Rasmus Fauske
___
zfs-discuss mailing
