On Dec 16, 2010, at 12:08 PM, Alexander Lesle wrote:
Hello Pasi,
thx for the quick answer.
Its sounds fine because with the Asus Board and at Nexenta always I
get a message that my rpool is degraded when I set AHCI.
That is very unusual. Please send the output of zpool status -xv
Hello All,
I want to build a home file and media server now. After experiment with a
Asus Board and running in unsolve problems I have bought this
Supermicro Board X8SIA-F with Intel i3-560 and 8 GB Ram
http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIA.cfm?IPMI=Y
also the LSI HBA
On Thu, Dec 16, 2010 at 08:43:02PM +0100, Alexander Lesle wrote:
Hello All,
I want to build a home file and media server now. After experiment with a
Asus Board and running in unsolve problems I have bought this
Supermicro Board X8SIA-F with Intel i3-560 and 8 GB Ram
Hello Pasi,
thx for the quick answer.
Its sounds fine because with the Asus Board and at Nexenta always I
get a message that my rpool is degraded when I set AHCI.
Additionally with the LSI HBA the board doesnt boot by set AHCI.
am Donnerstag, 16. Dezember 2010 um 20:53 hat Pasi Kärkkäinen u.a.
support with no direct
SATA support)
HTH,
Deano
-Original Message-
From: zfs-discuss-boun...@opensolaris.org
[mailto:zfs-discuss-boun...@opensolaris.org] On Behalf Of Alexander Lesle
Sent: 16 December 2010 19:43
To: zfs-discuss@opensolaris.org
Subject: [zfs-discuss] AHCI or IDE?
Hello All
From: zfs-discuss-boun...@opensolaris.org [mailto:zfs-discuss-
boun...@opensolaris.org] On Behalf Of Alexander Lesle
After reading the board manual I found at page 4-9 where I can set
SATA#1 from IDE to AHCI.
Can zfs handle AHCI for rpool?
Can zfs handle AHCI for tank?
Yes, and yes.
