On Wed, Jul 09, 2008 at 11:18:23PM -0500, Florin Iucha wrote:
On Wed, Jul 09, 2008 at 06:02:24PM -0700, Brandon High wrote:
Here's the component list that I'm planning to use right now:
http://secure.newegg.com/WishList/PublicWishDetail.aspx?Source=MSWDWishListNumber=7739092
this looks
It was posted in the CIFS forum a couple of days ago:
http://www.opensolaris.org/jive/forum.jspa?forumID=214
Thread: HEADS-UP: Please skip snv_93 if you use CIFS server:
http://www.opensolaris.org/jive/thread.jspa?threadID=65996tstart=0
This message posted from opensolaris.org
On Thu, Jul 10, 2008 at 1:15 AM, Fajar A. Nugraha [EMAIL PROTECTED] wrote:
Another alternative is to use an IDE to Compact Flash adapter, and
boot off of flash.
Just curious, what will that flash contain?
e.g. will it be similar to linux's /boot, or will it contain the full
solaris root?
My recommendation: buy a small, cheap 2.5 SATA hard drive (or 1.8 SSD) and
use that as your boot volume, I'd even bolt it to the side of your case if you
have to. Then use the whole of your three large disks as a raid-z set.
If I were in your shoes I would also have bought 4 drives for ZFS
Brandon High wrote:
On Wed, Jul 9, 2008 at 3:37 PM, Florin Iucha [EMAIL PROTECTED] wrote:
The question is, how should I partition the drives, and what tuning
parameters should I use for the pools and file systems? From reading
the best practices guides [1], [2], it seems that I cannot have
Fajar A. Nugraha wrote:
If you have enough memory (say 4gb) you probably won't need swap. I
believe swap can live in a ZFS pool now too, so you won't necesarily
need another slice. You'll just have RAID-Z protected swap.
Really? I think solaris still needs non-zfs swap for default dump
On Thu, Jul 10, 2008 at 12:47:26AM -0700, Ross wrote:
My recommendation: buy a small, cheap 2.5 SATA hard drive (or 1.8 SSD) and
use that as your boot volume, I'd even bolt it to the side of your case if
you have to. Then use the whole of your three large disks as a raid-z set.
Yup, I'm
Fajar A. Nugraha wrote:
Brandon High wrote:
Another alternative is to use an IDE to Compact Flash adapter, and
boot off of flash.
Just curious, what will that flash contain?
e.g. will it be similar to linux's /boot, or will it contain the full
solaris root?
How do you manage redundancy
Hello,
I plan to use (Open)Solaris for a home file server. I wanted cool and
quiet hardware, so I picked a mini-atx motherboard and case, an AMD64
CPU and 4 GB of RAM. My case has room for three hard drives and I
have chosen 3x WD 750 Green Power hard drives. The file server will
serve out via
On Wed, Jul 9, 2008 at 3:37 PM, Florin Iucha [EMAIL PROTECTED] wrote:
The question is, how should I partition the drives, and what tuning
parameters should I use for the pools and file systems? From reading
the best practices guides [1], [2], it seems that I cannot have the
root file system
On Wed, Jul 09, 2008 at 06:02:24PM -0700, Brandon High wrote:
On Wed, Jul 9, 2008 at 3:37 PM, Florin Iucha [EMAIL PROTECTED] wrote:
The reason for using a whole disk is that ZFS will turn on the drive's
cache. When using slices, the cache is normally disabled. If all
slices are using ZFS, you
11 matches
Mail list logo