Re: [zfs-discuss] Moving /export to another zpool
Are the old /opt and /expore still listed in your vfstab(4) file? I cant access /etc/vfstab because I can't even log in as my username. I can't even log in as root from the Login Screen And when I boot on using LiveCD, how can I mount my first drive that has opensolaris installed ? -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] [indiana-discuss] Cannot Mirror RPOOL, Can't Label Disk to SMI
Dear Candy, This is the log of zpool status, along with partition of c3d0 and c4d0 1. It appears to me that once I destroy the partition of c4d0 and recreate it again, I get different slices in c4d0. I forgot which fdisk partition I chose, it is either Solaris, Solaris2, or Unix System, and it gives the default location like that I think I must manually create slice, but If I look at c3d0, which slice should I mirror ? root ? backup ? 2. And, for mirror to works, does it have to reside in the same cylinder in the other disk ? 3. For mirroring an IDE device ( since this SATA drive is translated into IDE, which is visible if we see in format ), Is it correct that it have to be slice that is being mirrored, and can't be the whole disk like what I did in Fedora 10, using software raid at the installation time ? Thank you for everyone's guidance === hando...@opensolaris:~# zpool status pool: rpool state: ONLINE scrub: none requested config: NAMESTATE READ WRITE CKSUM rpool ONLINE 0 0 0 c3d0s0ONLINE 0 0 0 errors: No known data errors hando...@opensolaris:~# format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c3d0 DEFAULT cyl 60797 alt 2 hd 255 sec 63 /p...@0,0/pci-...@1f,2/i...@0/c...@0,0 1. c4d0 SATA2 cyl 60797 alt 2 hd 255 sec 63 /p...@0,0/pci-...@1f,2/i...@1/c...@0,0 Specify disk (enter its number): 1 selecting c4d0 Controller working list found [disk formatted, defect list found] FORMAT MENU: disk - select a disk type - select (define) a disk type partition - select (define) a partition table current- describe the current disk format - format and analyze the disk fdisk - run the fdisk program repair - repair a defective sector show - translate a disk address label - write label to the disk analyze- surface analysis defect - defect list management backup - search for backup labels verify - read and display labels save - save new disk/partition definitions volname- set 8-character volume name !cmd - execute cmd, then return quit format partition PARTITION MENU: 0 - change `0' partition 1 - change `1' partition 2 - change `2' partition 3 - change `3' partition 4 - change `4' partition 5 - change `5' partition 6 - change `6' partition 7 - change `7' partition select - select a predefined table modify - modify a predefined partition table name - name the current table print - display the current table label - write partition map and label to the disk !cmd - execute cmd, then return quit partition print Current partition table (original): Total disk cylinders available: 60797 + 2 (reserved cylinders) Part TagFlag Cylinders SizeBlocks 0 unassignedwm 00 (0/0/0) 0 1 unassignedwm 00 (0/0/0) 0 2 backupwu 0 - 60796 465.73GB(60797/0/0) 976703805 3 unassignedwm 00 (0/0/0) 0 4 unassignedwm 00 (0/0/0) 0 5 unassignedwm 00 (0/0/0) 0 6 unassignedwm 00 (0/0/0) 0 7 unassignedwm 00 (0/0/0) 0 8 bootwu 0 - 07.84MB(1/0/0) 16065 9 alternateswm 1 - 2 15.69MB(2/0/0) 32130 format disk AVAILABLE DISK SELECTIONS: 0. c3d0 DEFAULT cyl 60797 alt 2 hd 255 sec 63 /p...@0,0/pci-...@1f,2/i...@0/c...@0,0 1. c4d0 SATA2 cyl 60797 alt 2 hd 255 sec 63 /p...@0,0/pci-...@1f,2/i...@1/c...@0,0 Specify disk (enter its number)[1]: 0 selecting c3d0 NO Alt slice No defect list found [disk formatted, no defect list found] /dev/dsk/c3d0s0 is part of active ZFS pool rpool. Please see zpool(1M). format partition PARTITION MENU: 0 - change `0' partition 1 - change `1' partition 2 - change `2' partition 3 - change `3' partition 4 - change `4' partition 5 - change `5' partition 6 - change `6' partition 7 - change `7' partition select - select a predefined table modify - modify a predefined partition table name - name the current table print - display the current table label - write partition map and label to the disk !cmd - execute cmd, then
[zfs-discuss] Cannot Mirror RPOOL, Can't Label Disk to SMI
Dear ZFS experts, I have 2 SATA 500 GB Hard Drive on my Dual Core PC I have installed OpenSolaris 2008.11 using Live CD I got from Sun Tech Days in Singapore Now, using all the guidelines I got here at Indiana Discussion, I can't attach my second drive to rpool to make them mirror Initially I was playing around with similar configuration in VirtualBox, and it does not succeed. Finally I am trying it with my real machine, and it still hasn't work I Logged the steps, and attach it here. I hope someone who is expert can tell me which part that I did went wrong. Thank You, Handojo These are the description of the first drive using format : == Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c3d0 DEFAULT cyl 60797 alt 2 hd 255 sec 63 /p...@0,0/pci-...@1f,2/i...@0/c...@0,0 1. c4d0 DEFAULT cyl 60797 alt 2 hd 255 sec 63 /p...@0,0/pci-...@1f,2/i...@1/c...@0,0 Specify disk (enter its number): 0 selecting c3d0 No defect list found [disk formatted, no defect list found] /dev/dsk/c3d0s0 is part of active ZFS pool rpool. Please see zpool(1M). FORMAT MENU: disk - select a disk type - select (define) a disk type partition - select (define) a partition table current- describe the current disk format - format and analyze the disk fdisk - run the fdisk program repair - repair a defective sector show - translate a disk address label - write label to the disk analyze- surface analysis defect - defect list management backup - search for backup labels verify - read and display labels save - save new disk/partition definitions volname- set 8-character volume name !cmd - execute cmd, then return quit format part PARTITION MENU: 0 - change `0' partition 1 - change `1' partition 2 - change `2' partition 3 - change `3' partition 4 - change `4' partition 5 - change `5' partition 6 - change `6' partition 7 - change `7' partition select - select a predefined table modify - modify a predefined partition table name - name the current table print - display the current table label - write partition map and label to the disk !cmd - execute cmd, then return quit partition print Current partition table (original): Total disk cylinders available: 60797 + 2 (reserved cylinders) Part TagFlag Cylinders SizeBlocks 0 rootwm 1 - 60795 465.71GB(60795/0/0) 976671675 1 unassignedwm 00 (0/0/0) 0 2 backupwu 0 - 60796 465.73GB(60797/0/0) 976703805 3 unassignedwm 00 (0/0/0) 0 4 unassignedwm 00 (0/0/0) 0 5 unassignedwm 00 (0/0/0) 0 6 unassignedwm 00 (0/0/0) 0 7 unassignedwm 00 (0/0/0) 0 8 bootwu 0 - 07.84MB(1/0/0) 16065 9 unassignedwm 00 (0/0/0) 0 partition quit FORMAT MENU: disk - select a disk type - select (define) a disk type partition - select (define) a partition table current- describe the current disk format - format and analyze the disk fdisk - run the fdisk program repair - repair a defective sector show - translate a disk address label - write label to the disk analyze- surface analysis defect - defect list management backup - search for backup labels verify - read and display labels save - save new disk/partition definitions volname- set 8-character volume name !cmd - execute cmd, then return quit format quit == These are the log that I capture to change EFI labeling to SMI before adding to rpool ( and it failed. I followed this guide, and several other guide, which is exactly the same, but it doesn't work for me ) Here's the links : http://opensolaris.org/jive/thread.jspa?messageID=331284 Here's the log : == hando...@opensolaris:~# zpool add rpool c4d0 cannot label 'c4d0': EFI labeled devices are not supported on root pools. hando...@opensolaris:~# format -e c4d0 selecting c4d0 No defect list found [disk formatted, no defect list found] FORMAT
