We have a system with two drives in it, part UFS, part ZFS. It's a software
mirrored system with slices 0,1,3 setup as small UFS slices, and slice 4 on
each drive being the ZFS slice.
One of the drives is failing and we need to replace it.
I just want to make sure I have the correct order of
Matt Cohen wrote:
We have a system with two drives in it, part UFS, part ZFS. It's a software
mirrored system with slices 0,1,3 setup as small UFS slices, and slice 4 on
each drive being the ZFS slice.
One of the drives is failing and we need to replace it.
I just want to make sure I
Matt,
Generally, when a disk needs to be replaced, you replace the disk,
use the zpool replace command, and you're done...
This is only a little more complicated in your scenario below because
of the sharing the disk between ZFS and UFS.
Most disks are hot-pluggable so you generally don't need
Matt,
Also, since you only have two drives and are using software mirroring
for the UFS slices, you'll need to follow the proper procedures for the
software mirroring metadata replicas. See the pertinent docs for details.
-- richard
[EMAIL PROTECTED] wrote:
Matt,
Generally, when a disk needs
