Hi Jonas,
At first sight it looks like your unopenable disks were relabeled with
SMI label (hence the cyl count on format's output).
Not sure if it is completely safe data wise but you could try to relabel
your disks with EFI label (use format -e to access label choice).
F.
On 10/18/09
Hi, thank you for replying.
I tried to set a label but I got this.
#format -e
The device does not support mode page 3 or page 4,
or the reported geometry info is invalid.
WARNING: Disk geometry is based on capacity data.
The current rpm value 0 is invalid, adjusting it to 3600
The device
On Mon, 19 Oct 2009, Jonas Nordin wrote:
Hi, thank you for replying.
I tried to set a label but I got this.
#format -e
The device does not support mode page 3 or page 4,
or the reported geometry info is invalid.
WARNING: Disk geometry is based on capacity data.
Maybe your drives have bad
hi,
After a shutdown my zpool wont go online again, zpool status showed that only
one of five hard drives is online. I tried to export the pool and get it back
in hope of a fix but with no change.
I have replaced the sata cables and even replaced the motherboard but it's
always showes the same
hi,
After a shutdown my zpool wont go online again, zpool status showed that only
one of five hard drives is online. I tried to export the pool and get it back
in hope of a fix but with no change.
I have replaced the sata cables and even replaced the motherboard but it's
always showes the same
