Hi, Please find the requirement and send me updated resume ASAP
Please send resumes to [EMAIL PROTECTED] *Location: *Emeryville California Length: 6 months * * *1. **PURPOSE* 1.1. The purpose of this document is to develop the requirements for a Building Automation System (BAS) Project Engineer to work on the PDU BAS Replacement Project for Bayer HealthCare in Emeryville California. 2. *Project Scope of Work* 2.1. The existing Barber-Coleman HVAC Controls and alarming system will be replaced with a Siemens Building Technologies Insight Model PxCM BAS system. 2.2. The existing Paragon alarm monitoring system will be removed and connected to the new Siemens system. 2.3. Existing differential pressure transmitters and obsolete current to pneumatic (I/P) devices will be replaced. 2.4. Existing control panels will be demolished and new Siemens PxCM panels will be installed. 2.5. A new server, printer and RENO dial out system will be networked for access to data by production and Facility Operations personnel. 2.6. Siemens Building Technologies engineers and technicians will perform all hardware and software installations. 2.7. Construction activities will require installation of new instruments, instrument calibration, commissioning and a documentation package which will be turned over to the validation group for I/O/Q. 2.8. The project is currently phasing into detail design and funding approval is underway. 2.9. The BAS will be replaced during an annual ten (10) week manufacturing / production shutdown beginning in April 2009. * * * * *3. **Experience and Skills Required* 3.1. The BAS Project Engineer candidate should have a broad technical understanding of cGMP requirements, facility operation, building automation system, engineering turn over package documentation and a general knowledge of the validation process. 3.2. The selected candidate should demonstrate the ability to communicate effectively both orally and in writing. An understanding of timeline driven deliverables is also a requirement. 3.3. The ability to identify predecessor requirements and solve problems must be coupled with a desire to work as part of an integrated project team. 3.4. Proficiency with Microsoft Office and Microsoft Project software is also required to perform this job effectively. 3.5. The successful candidate must be able to: 3.5.1. Work under the supervision and guidance of the Project Manager 3.5.2. Develop project schedules and project milestones 3.5.3. Oversee and coordinate the work of Siemens electrical and mechanical sub-contractors. 3.5.4. Oversee and coordinate the work of calibration crew and assure that documents are properly completed. 3.5.5. Attend or conduct weekly project and coordination meetings. Perform duties of Project Manager during absences. 3.5.6. Review Bayer HealthCare instrument, electrical and network documents during detail design. 3.5.7. Review Siemens programming and construction efforts to assure compliance with project requirements. 3.5.8. Review detail design documents to meet project objectives and timelines. 3.5.9. Review commissioning and GMP execution documentation. Generate engineering corrective action plans. 3.5.10. Identify risks and devise problem solving and risk mitigation strategies as they arise during the project time line. 3.6. The Project Engineer must begin work as soon as October, 2008 and complete all work by June, 2009. This includes commissioning, start up, validation support, engineering turn over package development that will allow a release to production no later than June, 2009. 3.7. The candidate must have a laptop with adequate software to meet job scope description. 3.8. The Project Engineer will report to the PDU BAS Project Manager. -- Warm Regards, Prashant G OSAIR Technologies. Phone: 408-649-5536 Fax: 732-289-6076 [EMAIL PROTECTED] www.osairtech.com "We Want to be your Trusted , Preferred & long Term Partner" Note: If you are not interested in receiving our e-mails then please reply to [EMAIL PROTECTED] with a "remove" in the subject line and mention all the e-mail addresses to be removed with any e-mail addresses, which might be diverting the e-mails to you. Apologies for the inconvenience caused --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "zilliontechnologies" group. To post to this group, send email to zilliontechnologies@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/zilliontechnologies?hl=en -~----------~----~----~----~------~----~------~--~---
