Re: Fwd: [Zope] zopectl or runzope just won't start zope
These sounds like Plone questions best asked on a Plone list... Chris Qass wrote: Thanks for your reply fm. The python version in my path is 2.3.5 and both python and zope were build from source. Zope is installed in /opt which is where the python 2.3.5 is too. I got rid of the zope instance I had running earlier and created a new instance in my home directory. Now when I run zopectl start from the /bin in the instance in my home directory I get the following error: . Traceback (most recent call last): File /opt/zope-2.8.4/lib/python/zdaemon/zdrun.py, line 719, in ? main() File /opt/zope-2.8.4/lib/python/zdaemon/zdrun.py, line 716, in main d.main(args) File /opt/zope-2.8.4/lib/python/zdaemon/zdrun.py, line 243, in main self.run() File /opt/zope-2.8.4/lib/python/zdaemon/zdrun.py, line 256, in run self.opensocket() File /opt/zope-2.8.4/lib/python/zdaemon/zdrun.py, line 278, in opensocket sock.bind(tempname) File string, line 1, in bind socket.error: (2, 'No such file or directory') I then tried to run 'runzope' and got the following which don't look like errors: /home/blah/zope/Products/PortalTransforms/TransformEngine.py:18: DeprecationWarning: The module, 'Products.CMFCore.CMFCorePermissions' is a deprecated compatiblity alias for 'Products.CMFCore.permissions'; please use the new module instead. from Products.CMFCore import CMFCorePermissions /home/blah/zope/Products/CMFCore/utils.py:629: DeprecationWarning: format_stx() will be removed in CMF 1.6. Please use StructuredText.StructuredText.HTML instead. DeprecationWarning) /home/sra/zope/Products/kupu/__init__.py:23: DeprecationWarning: The Zope package has been renamed to Zope2. Import of a package named 'Zope' is deprecated and will be disabled starting in Zope 2.11. import Zope /home/blah/zope/Products/CMFFormController/__init__.py:25: DeprecationWarning: The product_name parameter of ToolInit is deprecated and will be ignored in CMF1.6: CMFFormController product_name='CMFFormController', icon='tool.gif', /home/blah/zope/Products/GroupUserFolder/__init__.py:99: DeprecationWarning: The product_name parameter of ToolInit is deprecated and will be ignored in CMF1.6: GroupUserFolder , icon=tool.gif /home/sra/zope/Products/MimetypesRegistry/__init__.py:34: DeprecationWarning: The product_name parameter of ToolInit is deprecated and will be ignored in CMF1.6: MimetypesRegistry icon=tool.gif, /home/blah/zope/Products/PloneLanguageTool/__init__.py:17: DeprecationWarning: The product_name parameter of ToolInit is deprecated and will be ignored in CMF1.6: PloneLanguageTool icon='tool.gif', /home/sra/zope/Products/PortalTransforms/__init__.py:35: DeprecationWarning: The product_name parameter of ToolInit is deprecated and will be ignored in CMF1.6: PortalTransforms icon=tool.gif, /home/blah/zope/Products/ResourceRegistries/__init__.py:20: DeprecationWarning: The product_name parameter of ToolInit is deprecated and will be ignored in CMF1.6: ResourceRegistries icon = 'tool.gif', /home/blah/zope/Products/kupu/plone/__init__.py:31: DeprecationWarning: The product_name parameter of ToolInit is deprecated and will be ignored in CMF1.6: kupu icon=kupu_icon.gif, I finally made it to the ZMI, moved the folders from the untarred Plone tarball into the Products folder in the instance running in my home directory and restart the zope instance using runzope. I expect to see Plone Site in the drop down menu on the right but don't. I do a Plone Language Tool. Could you help me figure out why Plone Site won't show up. Thank you very much for your time. Qass On 12/14/05, Floyd May [EMAIL PROTECTED] wrote: First, I would recommend against changing anything in any file at this point except configuration files. Next, verify that the correct python version is being used. It's easy to have two pythons side-by-side on the same linux system. If you built Zope from source, you (probably) should build python from source as well. However, if you used an installable package for Zope, I would recommend staying with whatever version pairing of Zope/Python that your Linux distribution has by default. It's simpler that way, and will probably solve your problem. I know that I've built Zope before where it's pointed at the wrong python version, and got things all screwed up for me. Use `which python` -V (those are backtics) to figure out the version that your $PATH points to by default. If you *are* building from source, verify that you used --with-python=/path/to/python2.3.5 when you ran the configure script for Zope. The configure script should(?) tell you if there's a problem with any module dependencies. Again, if building Zope from source, it's probably best that you use a python built from source as well. Good Luck! fm On 12/14/05, Qass [EMAIL PROTECTED] wrote: Hi: I'm new to zope and yesterday installed zope 2.8.4 on a linux system running python 2.3.5 Having followed installation instructions I got to
[Zope] zopectl or runzope just won't start zope
Hi: I'm new to zope and yesterday installed zope 2.8.4 on a linux system running python 2.3.5 Having followed installation instructions I got to the point of 'zopectl start' and got the following error message while trying both 'runzope' and 'zopectl'. I've tried installing different versions of Zope and get the same error (error absent with Zope 3). At one point, Zope did start (I moved it to a different port) but when I tried installing Plone in the Products directory of the zope instance, the 'Plone Site' did not show up in the drop down menu on the right hand side of the ZMI. Which is why I decided to reinstall and have been getting errors since. I haven't messed around with the Python installation at all. In this latest install I ran 'make instance' intead of 'make install' just to see if I would get the same error as I did yesterday when I had an instance of Zope running and I did. Any help in trying to fix this would be highly appreciated. I've tried changing PYTHONPATH in the zopectl file but that just leads to more and more errors. Traceback (most recent call last): File /blah//Zope-2.8.4-final/lib/python/Zope2/Startup/run.py, line 56, in ? run() File /blah/Zope-2.8.4-final/lib/python/Zope2/Startup/run.py, line 17, in run import Zope2.Startup File /blah/Zope-2.8.4-final/lib/python/Zope2/__init__.py, line 60, in ? from Zope2.Startup.run import configure File /network/share/home/sra/Zope-2.8.4-final/lib/python/Zope2/Startup/__init__.py, line 24, in ? import ZConfig File /blah/Zope-2.8.4-final/lib/python/ZConfig/__init__.py, line 21, in ? from ZConfig.loader import loadConfig, loadConfigFile File /blah/Zope-2.8.4-final/lib/python/ZConfig/loader.py, line 23, in ? import ZConfig.datatypes File /blah/Zope-2.8.4-final/lib/python/ZConfig/datatypes.py, line 19, in ? import datetime File /blah/Zope-2.8.4-final/lib/python/DateTime/__init__.py, line 13, in ? from DateTime import DateTime File /blah/Zope-2.8.4-final/lib/python/DateTime/DateTime.py, line 21, in ? from datetime import datetime File /blah/Zope-2.8.4-final/lib/python/DateTime/DateTime.py, line 21, in ? from datetime import datetime ImportError: cannot import name datetime Thank you very much for your help. Qass ___ Zope maillist - Zope@zope.org http://mail.zope.org/mailman/listinfo/zope ** No cross posts or HTML encoding! ** (Related lists - http://mail.zope.org/mailman/listinfo/zope-announce http://mail.zope.org/mailman/listinfo/zope-dev )
Re: [Zope] zopectl or runzope just won't start zope
First, I would recommend against changing anything in any file at this point except configuration files. Next, verify that the correct python version is being used. It's easy to have two pythons side-by-side on the same linux system. If you built Zope from source, you (probably) should build python from source as well. However, if you used an installable package for Zope, I would recommend staying with whatever version pairing of Zope/Python that your Linux distribution has by default. It's simpler that way, and will probably solve your problem. I know that I've built Zope before where it's pointed at the wrong python version, and got things all screwed up for me. Use `which python` -V (those are backtics) to figure out the version that your $PATH points to by default. If you *are* building from source, verify that you used --with-python=/path/to/python2.3.5 when you ran the configure script for Zope. The configure script should(?) tell you if there's a problem with any module dependencies. Again, if building Zope from source, it's probably best that you use a python built from source as well. Good Luck! fmOn 12/14/05, Qass [EMAIL PROTECTED] wrote: Hi:I'm new to zope and yesterday installed zope 2.8.4 on a linux systemrunning python 2.3.5Having followed installation instructions I got to the point of'zopectl start' and got the following error message while trying both 'runzope' and 'zopectl'.I've tried installing different versions of Zope and get the sameerror (error absent with Zope 3). At one point, Zope did start (Imoved it to a different port) but when I tried installing Plone in the Products directory of the zope instance, the 'Plone Site' did not showup in the drop down menu on the right hand side of the ZMI. Which iswhy I decided to reinstall and have been getting errors since. Ihaven't messed around with the Python installation at all. In this latest install I ran 'make instance' intead of 'make install'just to see if I would get the same error as I did yesterday when Ihad an instance of Zope running and I did.Any help in trying to fix this would be highly appreciated. I've tried changing PYTHONPATH in the zopectl file but that just leads to moreand more errors.Traceback (most recent call last):File /blah//Zope-2.8.4-final/lib/python/Zope2/Startup/run.py, line 56, in ? run()File /blah/Zope-2.8.4-final/lib/python/Zope2/Startup/run.py, line 17, in runimport Zope2.StartupFile /blah/Zope-2.8.4-final/lib/python/Zope2/__init__.py, line 60, in ? from Zope2.Startup.run import configureFile /network/share/home/sra/Zope-2.8.4-final/lib/python/Zope2/Startup/__init__.py,line 24, in ?import ZConfigFile /blah/Zope-2.8.4-final /lib/python/ZConfig/__init__.py, line 21, in ?from ZConfig.loader import loadConfig, loadConfigFileFile /blah/Zope-2.8.4-final/lib/python/ZConfig/loader.py, line 23, in ?import ZConfig.datatypes File /blah/Zope-2.8.4-final/lib/python/ZConfig/datatypes.py, line 19, in ?import datetimeFile /blah/Zope-2.8.4-final/lib/python/DateTime/__init__.py, line 13, in ?from DateTime import DateTime File /blah/Zope-2.8.4-final/lib/python/DateTime/DateTime.py, line 21, in ?from datetime import datetimeFile /blah/Zope-2.8.4-final/lib/python/DateTime/DateTime.py, line 21, in ? from datetime import datetimeImportError: cannot import name datetimeThank you very much for your help.Qass___Zope maillist- Zope@zope.orghttp://mail.zope.org/mailman/listinfo/zope** No cross posts or HTML encoding!**(Related lists - http://mail.zope.org/mailman/listinfo/zope-announce http://mail.zope.org/mailman/listinfo/zope-dev )-- Floyd MaySenior Systems AnalystCTLN - CareerTech Learning Network[EMAIL PROTECTED] ___ Zope maillist - Zope@zope.org http://mail.zope.org/mailman/listinfo/zope ** No cross posts or HTML encoding! ** (Related lists - http://mail.zope.org/mailman/listinfo/zope-announce http://mail.zope.org/mailman/listinfo/zope-dev )
Fwd: [Zope] zopectl or runzope just won't start zope
Thanks for your reply fm. The python version in my path is 2.3.5 and both python and zope were build from source. Zope is installed in /opt which is where the python 2.3.5 is too. I got rid of the zope instance I had running earlier and created a new instance in my home directory. Now when I run zopectl start from the /bin in the instance in my home directory I get the following error: . Traceback (most recent call last): File /opt/zope-2.8.4/lib/python/zdaemon/zdrun.py, line 719, in ? main() File /opt/zope-2.8.4/lib/python/zdaemon/zdrun.py, line 716, in main d.main(args) File /opt/zope-2.8.4/lib/python/zdaemon/zdrun.py, line 243, in main self.run() File /opt/zope-2.8.4/lib/python/zdaemon/zdrun.py, line 256, in run self.opensocket() File /opt/zope-2.8.4/lib/python/zdaemon/zdrun.py, line 278, in opensocket sock.bind(tempname) File string, line 1, in bind socket.error: (2, 'No such file or directory') I then tried to run 'runzope' and got the following which don't look like errors: /home/blah/zope/Products/PortalTransforms/TransformEngine.py:18: DeprecationWarning: The module, 'Products.CMFCore.CMFCorePermissions' is a deprecated compatiblity alias for 'Products.CMFCore.permissions'; please use the new module instead. from Products.CMFCore import CMFCorePermissions /home/blah/zope/Products/CMFCore/utils.py:629: DeprecationWarning: format_stx() will be removed in CMF 1.6. Please use StructuredText.StructuredText.HTML instead. DeprecationWarning) /home/sra/zope/Products/kupu/__init__.py:23: DeprecationWarning: The Zope package has been renamed to Zope2. Import of a package named 'Zope' is deprecated and will be disabled starting in Zope 2.11. import Zope /home/blah/zope/Products/CMFFormController/__init__.py:25: DeprecationWarning: The product_name parameter of ToolInit is deprecated and will be ignored in CMF1.6: CMFFormController product_name='CMFFormController', icon='tool.gif', /home/blah/zope/Products/GroupUserFolder/__init__.py:99: DeprecationWarning: The product_name parameter of ToolInit is deprecated and will be ignored in CMF1.6: GroupUserFolder , icon=tool.gif /home/sra/zope/Products/MimetypesRegistry/__init__.py:34: DeprecationWarning: The product_name parameter of ToolInit is deprecated and will be ignored in CMF1.6: MimetypesRegistry icon=tool.gif, /home/blah/zope/Products/PloneLanguageTool/__init__.py:17: DeprecationWarning: The product_name parameter of ToolInit is deprecated and will be ignored in CMF1.6: PloneLanguageTool icon='tool.gif', /home/sra/zope/Products/PortalTransforms/__init__.py:35: DeprecationWarning: The product_name parameter of ToolInit is deprecated and will be ignored in CMF1.6: PortalTransforms icon=tool.gif, /home/blah/zope/Products/ResourceRegistries/__init__.py:20: DeprecationWarning: The product_name parameter of ToolInit is deprecated and will be ignored in CMF1.6: ResourceRegistries icon = 'tool.gif', /home/blah/zope/Products/kupu/plone/__init__.py:31: DeprecationWarning: The product_name parameter of ToolInit is deprecated and will be ignored in CMF1.6: kupu icon=kupu_icon.gif, I finally made it to the ZMI, moved the folders from the untarred Plone tarball into the Products folder in the instance running in my home directory and restart the zope instance using runzope. I expect to see Plone Site in the drop down menu on the right but don't. I do a Plone Language Tool. Could you help me figure out why Plone Site won't show up. Thank you very much for your time. Qass On 12/14/05, Floyd May [EMAIL PROTECTED] wrote: First, I would recommend against changing anything in any file at this point except configuration files. Next, verify that the correct python version is being used. It's easy to have two pythons side-by-side on the same linux system. If you built Zope from source, you (probably) should build python from source as well. However, if you used an installable package for Zope, I would recommend staying with whatever version pairing of Zope/Python that your Linux distribution has by default. It's simpler that way, and will probably solve your problem. I know that I've built Zope before where it's pointed at the wrong python version, and got things all screwed up for me. Use `which python` -V (those are backtics) to figure out the version that your $PATH points to by default. If you *are* building from source, verify that you used --with-python=/path/to/python2.3.5 when you ran the configure script for Zope. The configure script should(?) tell you if there's a problem with any module dependencies. Again, if building Zope from source, it's probably best that you use a python built from source as well. Good Luck! fm On 12/14/05, Qass [EMAIL PROTECTED] wrote: Hi: I'm new to zope and yesterday installed zope 2.8.4 on a linux system running python 2.3.5 Having followed installation instructions I got to the point of 'zopectl start' and got the following
