Re: [gentoo-user] Unable to emerge sys-apps/texinfo-4.8-r5

2006-12-08 Thread Markus Schönhaber
Huib van Wees wrote: I try to update my openssh... One of the dependency is sys-apps/texinfo- 4.8-r5] But this won't install... A Digest verification fails.. How can I fix this?! See some output below: [...] * checking ebuild checksums ;-) ... [ !! ] !!! Digest verification failed

[gentoo-user] Package removal error

2008-03-31 Thread Anthony E. Caudel
While updating world and after emerging a new version of texinfo, I received the following error when it tried to remove the old version: == sys-apps/texinfo selected: 4.8-r5 protected: 4.11-r1 omitted: none 'Selected' packages are slated

Re: [gentoo-user] binutils-libs-2.28-r1 - loadable library and perl binaries are mismatched

2017-07-03 Thread David Haller
o; \ then \ Looks like building bfd.info from its texinfo source (bfd.texi) fails, so it's texinfo again! # locate XSParagraph /usr/lib64/texinfo/XSParagraph.a /usr/lib64/texinfo/XSParagraph.la /usr/lib64/texinfo/XSParagraph.so # qfile /usr/lib64/texinfo/XSParagraph.so sys-a

Re: [gentoo-user] Package removal error

2008-03-31 Thread Albert Hopkins
On Mon, 2008-03-31 at 17:10 -0500, Anthony E. Caudel wrote: While updating world and after emerging a new version of texinfo, I received the following error when it tried to remove the old version: == sys-apps/texinfo selected: 4.8-r5

Re: [gentoo-user] gcc - texinfo dependency

2006-06-30 Thread Rumen Yotov
Enrico Weigelt wrote: Hi folks, I've seen, gcc has texinfo as rdependency. What does it need it for ? I'd like to get rid of it. cu Hi, Just checked and it's rather a DEPEND dependency not RDEPEND. Means texinfo is needed only for building GCC, not for running it. IIRC currently portage

[gentoo-user] Unable to emerge sys-apps/texinfo-4.8-r5

2006-12-08 Thread Huib van Wees
Hi list, I try to update my openssh... One of the dependency is sys-apps/texinfo- 4.8-r5] But this won't install... A Digest verification fails.. How can I fix this?! See some output below: emerge -uv openssh Calculating dependencies... done! Emerging (1 of 7) sys-apps/texinfo-4.8-r5

Re: [gentoo-user] Package removal error [solved]

2008-03-31 Thread Anthony E. Caudel
Anthony E. Caudel wrote: While updating world and after emerging a new version of texinfo, I received the following error when it tried to remove the old version: == sys-apps/texinfo selected: 4.8-r5 protected: 4.11-r1 omitted: none 'Selected

[gentoo-user] gcc - texinfo dependency

2006-06-30 Thread Enrico Weigelt
Hi folks, I've seen, gcc has texinfo as rdependency. What does it need it for ? I'd like to get rid of it. cu -- - Enrico Weigelt== metux IT service phone: +49 36207 519931 www: http

Re: [gentoo-user] ...again compile problems due to texinfo...

2017-06-29 Thread Marc Joliet
Just out of curiosity, but did you try with an older version of screen? Looking at the error messages from texinfo I can't help but wonder whether it's not screen that's at fault here. Greetings -- Marc Joliet -- "People who think they know everything really annoy those of us who kn

Re: [gentoo-user] Package removal error

2008-03-31 Thread Anthony E. Caudel
Albert Hopkins wrote: On Mon, 2008-03-31 at 17:10 -0500, Anthony E. Caudel wrote: While updating world and after emerging a new version of texinfo, I received the following error when it tried to remove the old version: == sys-apps/texinfo

Re: [gentoo-user] glibc-2.24-r2 failed (install phase)

2017-06-17 Thread tuxic
24-r2::gentoo failed (install phase): > > > > > > * emake failed > > > > > > * > > > > > > > > > > > > If anything more is wanted, I will be happy to post the wanted logs. > > > > > > But I want to prevent to logbom

Re: [gentoo-user] glibc-2.24-r2 failed (install phase)

2017-06-16 Thread Spackman, Chris
> al/execinfo.c.texi [snip] > > > > > [Makefile:12: install] Error 2 > > > > > > > > > > * ERROR: sys-libs/glibc-2.24-r2::gentoo failed (install phase): > > > > > * emake failed > > > > > * > > > > > > > &

Re: [gentoo-user] Re: emerge of `screen' possible perl mismatch

2016-06-27 Thread Alan McKinnon
(got handshake key 0x7cc, needed 0x7c4) >> > >> Anyone know what needs to be done here? >> Are there perl pkgs that need emerging first? > > Did you run perl-updater after upgrading perl? re-emerge texinfo, it provides the XSPar

[gentoo-user] Re: Cannot compile texinfo: Illegal instruction - Wrong -march and -mtune flags?

2007-08-02 Thread Alexander Skwar
· Me, myself I: Indeed, I think that I just have mixed up -march and -mtune (aka. -mcpu). Seems like. I now have: CFLAGS=-O2 -mtune=pentium-m -march=athlon-xp -pipe -fomit-frame-pointer and with this CFLAGS, I am able to compile texinfo. Alexander Skwar -- Q: What does it say

Re: [gentoo-user] info system maintainence / repair

2007-09-09 Thread Etaoin Shrdlu
to know how to install an info file manually. I'd rather leave it alone, but texinfo is one of the greatest things about both the GNU system and Emacs. I need to know how it works. If I may be forgiven for ranting a LITTLE bit, the idea of automatically setting up info files was a spark

[gentoo-user] C compiler cannot create executables

2005-05-27 Thread Colin
not exist !!! PORT_LOGDIR: /var/log/portage [does the md5 checks] [unpacks stuff] [...] Source unpacked. * econf: updating texinfo-4.7/config.guess with /usr/share/gnuconfig/config.guess * econf: updating texinfo-4.7/config.guess with /usr/share/gnuconfig/config.sub ./configure --prefix=/usr --host

[gentoo-user] Re: emerge of `screen' possible perl mismatch

2016-09-10 Thread Harry Putnam
cKinnon <alan.mckin...@gmail.com> writes: [...] > re-emerge texinfo, it provides the XSParagraph libs. > > You could also try > > perl-cleaner --all I've had a re-occurence of the same problem and wanted to tell you even though this is an old thread that re-emerging

Re: [gentoo-user] Re: Cannot compile texinfo: Illegal instruction - Wrong -march and -mtune flags?

2007-08-02 Thread Florian Philipp
texinfo. Alexander Skwar -- -march=pentium-m activates MMX, SSE and SSE2 -march=athlon-xp activates MMX, 3dNOW!, enhanced 3dNOW! and SSE You see, they are not compatible and even if some code works I wouldn't bet multimedia apps will perform well. With -mtune the instruction set stays

Re: [gentoo-user] Unable to emerge sys-apps/texinfo-4.8-r5

2006-12-08 Thread Alan McKinnon
On Friday 08 December 2006 14:44, Huib van Wees wrote: Hi list, I try to update my openssh... One of the dependency is sys-apps/texinfo- 4.8-r5] But this won't install... A Digest verification fails.. Usually this is because your last sync didn't work right, or the wrong files got uploaded

Re: [gentoo-user] ...again compile problems due to texinfo...

2017-06-29 Thread tuxic
On 06/29 08:01, Marc Joliet wrote: > Just out of curiosity, but did you try with an older version of screen? > Looking at the error messages from texinfo I can't help but wonder > whether it's not screen that's at fault here. > > Greetings > -- > Marc Joliet > -- >

Re: [gentoo-user] Re: Gentoo's advantage: 'optimized for your system' -- huh?

2009-02-06 Thread Stroller
On 6 Feb 2009, at 13:29, Neil Bothwick wrote: ... Which begs the question, why not use HTML? It can be read on just about anything, searched and either split into chapters or presented as a single page. AIUI info pages are compiled from Texinfo source and thus can be automagically

Re: [gentoo-user] Installation

2005-04-08 Thread A. Khattri
On Fri, 8 Apr 2005, J. Michael Morse wrote: I get the following message: !!! ERROR: sys-apps/texinfo-4.8 failed. !!! Function src_compile, Line 41, Exitcode2 !!! (no error message) !!! If you need support, post the topmost build error, NOT this status message. I have yet to figure out

Re: [gentoo-user] gcc - texinfo dependency

2006-07-04 Thread Richard Fish
On 7/4/06, Enrico Weigelt [EMAIL PROTECTED] wrote: BTW: I don't need info pages at all, is there any useflag to completely disable the whole info stuff ? Um, for many (most?) GNU programs, the info documentation is the only sane documentation. Or are you saying you don't want any

Re: [gentoo-user] gcc - texinfo dependency

2006-07-21 Thread Richard Fish
On 7/21/06, Enrico Weigelt [EMAIL PROTECTED] wrote: Yes, I can live absolutely w/o any docs. I find this incredibly ironic, considering that both of the portage questions you asked here today were answered with pointers to, or quotations of, the emerge man page :-/ -Richard --

Re: [gentoo-user] Downgrading glibc prevented by emerge/portage...but why initiated?

2017-09-12 Thread Andreas K. Huettel
> I masked =sys-libs/glibc-2.25-r4. > > And now I remember why I did this: It gave a compilation error: > (As some other packages) it has problems with my texinfo installation > as it seems. > bug number? -- Andreas K. Hüttel dilfri...@gentoo.org Gentoo Linux develo

Re: [gentoo-user] ...again compile problems due to texinfo...

2017-06-29 Thread tuxic
On 06/29 12:24, Mike Gilbert wrote: > On Wed, Jun 28, 2017 at 10:06 PM, <tu...@posteo.de> wrote: > > Hi, > > > > previously the compilation of glibc failed, because docs > > cpuld not be build. > > This was caused in the context of texinfo. > > &

Re: [gentoo-user] ...again compile problems due to texinfo...

2017-06-29 Thread Mike Gilbert
On Wed, Jun 28, 2017 at 10:06 PM, <tu...@posteo.de> wrote: > Hi, > > previously the compilation of glibc failed, because docs > cpuld not be build. > This was caused in the context of texinfo. > "Solved" was this by not building the docs via > deinstallation

[gentoo-user] ...again compile problems due to texinfo...

2017-06-28 Thread tuxic
Hi, previously the compilation of glibc failed, because docs cpuld not be build. This was caused in the context of texinfo. "Solved" was this by not building the docs via deinstallation of texinfo temporarily. No screen jumps over the edge and again texinfo seems to cause this:

[gentoo-user] Cannot compile texinfo: Illegal instruction - Wrong -march and -mtune flags?

2007-08-02 Thread Alexander Skwar
Hello. I'm trying to compile sys-apps/texinfo-4.8-r5, which fails with this error message: $restore $backupdir/* `echo ./texinfo.info | sed 's|[^/]*$||'`; \ fi; \ rm -rf $backupdir; exit $rc /bin/sh: line 13: 9091 Illegal instruction ..//makeinfo/makeinfo -I . -o

Re: [gentoo-user] C compiler cannot create executables

2005-05-27 Thread Bruno Lustosa
On 5/27/05, Colin [EMAIL PROTECTED] wrote: checking for C compiler default output file name... configure: error: C compiler cannot create executables See 'config.log' for more details. /var/tmp/portage/texinfo-4.7-r1/work/texinfo-4.7/config.log is available if needed. I really don't want

Re: [gentoo-user] gcc - texinfo dependency

2006-07-04 Thread Enrico Weigelt
* Rumen Yotov [EMAIL PROTECTED] wrote: snip Just checked and it's rather a DEPEND dependency not RDEPEND. Means texinfo is needed only for building GCC, not for running it. So, I can simply remove it by hand after building gcc. IIRC currently portage doesn't support removing DEPEND deps

[gentoo-user] Re: SOT (Slightlt OffTopic): Scriptable Documentation system (HTML/PDF) ?

2017-02-07 Thread Grant Edwards
between different markups, e.g. >> LaTeX and HTML, perhaps Pandoc would be appropriate >> >> http://pandoc.org/ >> >> Alex > > I seem to recall GNU have a 'system' which generates various manual formats > from a single input. I expect this would be script{

Re: [gentoo-user] Cannot compile texinfo: Illegal instruction - Wrong -march and -mtune flags?

2007-08-02 Thread Jan Seeger
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I'd think that using -march overrides -mtune. You cannot at the same time tune for two architectures. To cross-compile, you would need crossdev. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.7 (GNU/Linux)

[gentoo-user] Re: Query: any good venue for sample lexyacc or flexbison programs

2008-09-01 Thread Kevin O'Gorman
Erratum: On Mon, Sep 1, 2008 at 10:01 PM, Kevin O'Gorman [EMAIL PROTECTED] wrote: ... This applies to examples in the texinfo pages, the 2003 O'Reilly book, and online manuals. This book was actually published 11 years earlier, in 1992. Even a current download of the associated sample files

[gentoo-user] perl-cleaner oddities

2017-07-16 Thread tuxic
Hi, Again I have problems with screen and lynx to build based on some texinfo related reason. I learned from posting, that the real culprit is perl here and I have to run perl-cleaner --all for this to go away. Recentlu a perl update appears and I run perl-cleaner afterwards. But regardless how

Re: [gentoo-user] Downgrading glibc prevented by emerge/portage...but why initiated?

2017-09-12 Thread tuxic
On 09/12 04:52, Andreas K. Huettel wrote: > > I masked =sys-libs/glibc-2.25-r4. > > > > And now I remember why I did this: It gave a compilation error: > > (As some other packages) it has problems with my texinfo installation > > as it seems. > > > > b

Re: [gentoo-user] gcc-4.5.4 failed (install phase)

2013-04-08 Thread Joseph
-4.5.4/work/build' /var/tmp/portage/sys-devel/gcc-4.5.4/work/build /var/tmp/portage/sys-devel/gcc-4.5.4/work/gcc-4.5.4 cp: cannot stat ‘/var/tmp/portage/sys-devel/gcc-4.5.4/work/build/gcc/doc/*.info’: No such file or directory This is because of texinfo-5.1. There was already a bug about

Re: [gentoo-user] glibc-2.24-r2 failed (install phase)

2017-06-15 Thread tuxic
o] > > > Error 1 > > > make[2]: Leaving directory > > > '/var/tmp/portage/sys-libs/glibc-2.24-r2/work/glibc-2.24/manual' > > > make[1]: *** [Makefile:215: manual/subdir_install] Error 2 > > > make[1]: Leaving directory > > > '/var/tmp/por

Re: [gentoo-user] ...again compile problems due to texinfo...

2017-06-29 Thread Mike Gilbert
; cpuld not be build. >> > This was caused in the context of texinfo. >> > "Solved" was this by not building the docs via >> > deinstallation of texinfo temporarily. >> > >> > No screen jumps over the edge and again texinfo seems >> > t

Re: [gentoo-user] glibc-2.24-r2 failed (install phase)

2017-06-16 Thread Mick
1 make[2]: Leaving directory > > > > '/var/tmp/portage/sys-libs/glibc-2.24-r2/work/glibc-2.24/manual' > > > > make[1]: *** [Makefile:215: manual/subdir_install] Error 2 > > > > make[1]: Leaving directory > > > > '/var/tmp/portage/sys-libs/glib

[gentoo-user] Re: Gentoo's advantage: 'optimized for your system' -- huh?

2009-02-06 Thread Grant Edwards
over again! Yeah, I'd rather not see man or info come to that...well, at least man. If the HTML was automatically generated from some somewhat restricted source format (docbook, texinfo, nroff, etc.) then we could probably avoid the worst of the atrocities. -- Grant Edwards

Re: [gentoo-user] Re: Old IDE drives and the newer PATA kernel drivers

2010-09-02 Thread Alex Schuster
with a lot of documentation. Although the man page is very small, it says that the full documentation comes as Texinfo manual, so 'info grub' gives you the full manual. Or read it online here: http://www.gnu.org/software/grub/manual/legacy/ Wonko

Re: [gentoo-user] Portage internals : shadow root

2010-09-23 Thread Al
/sys-apps/texinfo-4.13/image/ install So it's not configure but make who takes the temporary install directory. PREFIX is indeed the final target. Al

[gentoo-user] Re: writing man pages (gentoo conventions)

2015-06-03 Thread Martin Vaeth
(and other format). For other formats, there are also tools like docutils or texinfo. If you want something which should eventually be printed (on paper), I would strongly recommend to learn LaTeX to get professional results.

Re: [gentoo-user] Downgrading glibc prevented by emerge/portage...but why initiated?

2017-09-12 Thread Mike Gilbert
On Tue, Sep 12, 2017 at 12:57 PM, <tu...@posteo.de> wrote: > On 09/12 04:52, Andreas K. Huettel wrote: >> > I masked =sys-libs/glibc-2.25-r4. >> > >> > And now I remember why I did this: It gave a compilation error: >> > (As some other packages)

Re: [gentoo-user] Finding orphaned libs

2009-06-08 Thread Willie Wong
for giving the solution, and to Alan for even asking the question. Having a box whose install dates to sep~ # head /var/log/emerge.log Started emerge on: Nov 03, 2002 *** emerge =sys-apps/baselayout-1.7.9-r1 =sys-apps/texinfo-4.2-r1 sys-devel/gettext =sys-devel/binutils-2.13.90.0.4 =sys-devel/gcc-3.2

Re: [gentoo-user] C compiler cannot create executables

2005-05-27 Thread Colin
Bruno Lustosa wrote: On 5/27/05, Colin [EMAIL PROTECTED] wrote: checking for C compiler default output file name... configure: error: C compiler cannot create executables See 'config.log' for more details. /var/tmp/portage/texinfo-4.7-r1/work/texinfo-4.7/config.log is available if needed

Re: [gentoo-user] glibc-2.24-r2 failed (install phase)

2017-06-15 Thread tuxic
directory > > '/var/tmp/portage/sys-libs/glibc-2.24-r2/work/glibc-2.24' > > make: *** [Makefile:12: install] Error 2 > > * ERROR: sys-libs/glibc-2.24-r2::gentoo failed (install phase): > > * emake failed > > * > > > > If anything more is wanted, I wi

Re: [gentoo-user] Re: grub chainloader

2007-07-19 Thread Hans-Werner Hilse
as a Texinfo manual. If the info and grub programs are properly installed at your site, the command info grub should give you access to the complete manual. snip But looking at grub(8), it seems someone was faster. SCNR. -hwh -- [EMAIL PROTECTED] mailing list

[gentoo-user] Re: Cannot compile texinfo: Illegal instruction - Wrong -march and -mtune flags?

2007-08-02 Thread Alexander Skwar
· Jan Seeger [EMAIL PROTECTED]: I'd think that using -march overrides -mtune. You cannot at the same time tune for two architectures. Hm, what's an architecture? From my understanding, I'd need crossdev if I'd try to compile for, lets say, PA-RISC on a x86 system. But that's not what I'm

Re: [gentoo-user] Re: [extremly, wildly, obscenely OT] Is there a Linux system without GNU userlands?

2008-08-10 Thread Mike Edenfield
licensed ones, but, of course, if the best tool for the job is under the GPL they're going to keep using it. Of the stuff that's still being included, the most items notable GNU projects are: binutils/gcc/gdb rcs texinfo groff grep They also use several standard, non-GNU GPL'd tools, like cvs

[gentoo-user] Re: Old IDE drives and the newer PATA kernel drivers

2010-09-02 Thread Nikos Chantziaras
but not sure about this part. Grub comes with a lot of documentation. Although the man page is very small, it says that the full documentation comes as Texinfo manual, so 'info grub' gives you the full manual. Or read it online here: http://www.gnu.org/software/grub/manual/legacy/ If you're on KDE

Re: [gentoo-user] Re: Old IDE drives and the newer PATA kernel drivers

2010-09-02 Thread Dale
the edit screen does but not sure about this part. Grub comes with a lot of documentation. Although the man page is very small, it says that the full documentation comes as Texinfo manual, so 'info grub' gives you the full manual. Or read it online here: http://www.gnu.org/software/grub/manual

Re: [gentoo-user] Problems while updateing screen (tool not monitor)

2015-11-16 Thread Meino . Cramer
> > > > > > The fix is app-misc/tmux > > > > > > ;) > > > > > > > > > > Sorry, not in my case. > > > > How can I make screen make compile successfully? > > > > > > > Seems already been reported, but not officially fixed: Bug 559746 - app-misc/screen-4.3.1 with >=sys-apps/texinfo-5.2 - ./screen.texinfo:3150: `@end' expected `deffn', but saw `example' ...I think, I have to wait longer... Best Meino

Re: [gentoo-user] Few blockers left

2017-03-27 Thread Neil Bothwick
s. > > That is true, so how do you clean up package.use with all these entries. > from: > # required by sys-libs/ncurses-5.9-r99::gentoo > # required by sys-apps/texinfo-5.2::gentoo > # required by dev-db/mariadb-10.0.21::gentoo > # required by virtual/mysql-5.6-r2::gentoo > #

Re: [gentoo-user] glibc-2.24-r2 failed (install phase)

2017-06-21 Thread tuxic
>> > Hi, > >> >> > > >> >> > Is there any solution for this problem ? > >> >> > Does anyone else has the same or similiar problems with this system > >> >> > update? > >> >> > > >> >> > Cheers >

Re: [gentoo-user] Downgrading glibc prevented by emerge/portage...but why initiated?

2017-09-12 Thread tuxic
office) > Hi Andreas, ...and it was also a configuration bug on my side (see my last posting). Do you know how to solve this long lasting texinfo problem on my side? Cheers Meino

Re: [gentoo-user] glibc-2.24-r2 failed (install phase)

2017-06-21 Thread Mike Gilbert
problem ? >> >> > Does anyone else has the same or similiar problems with this system >> >> > update? >> >> > >> >> > Cheers >> >> > Meino >> >> > >> >> >> >> What is the version o

[gentoo-user] My recent problems have been strange...

2008-03-03 Thread Chris Walters
prevent the caching of service dependencies. Thus, I could not use emerge and several other tools. The strange part is that it happened four different times with four different packages. Three examples are texinfo, gawk and coreutils. What makes this problem more odd is that I could install those

[gentoo-user] Re: Cannot compile texinfo: Illegal instruction - Wrong -march and -mtune flags?

2007-08-02 Thread Alexander Skwar
· Florian Philipp [EMAIL PROTECTED]: You see, they are not compatible and even if some code works I wouldn't bet multimedia apps will perform well. With -mtune the instruction set stays the same. It is just rearranged. Hm. Allright. When using just -mtune (ie. without -march), the docs at

[gentoo-user] Query: any good venue for sample lexyacc or flexbison programs

2008-09-01 Thread Kevin O'Gorman
the necessary fixes from it. 4 They are old and fail on modern versions of the software 5 They are just plain broken This applies to examples in the texinfo pages, the 2003 O'Reilly book, and online manuals. This is a very serious problem for learning these tools in their combined form. I'm

Re: [gentoo-user] Back up a server in real-time

2008-11-16 Thread Jorge Peixoto de Morais Neto
it with a LiveCD. This was to make sure that files and their metadata were not being changed while I was tar'ing them. Are you saying that I can actually fire up tar/rsync and back up in real time? Please read tar's texinfo manual, at least the section 5 Performing Backups and Restoring Files

[gentoo-user] migrating to gcc-3.4.4

2005-08-24 Thread Fernando Meira
] app-arch/bzip2-1.0.3-r5 -build -static 0 kB [ebuild N ] app-arch/cpio-2.6-r4 +nls 0 kB [ebuild N ] sys-apps/texinfo-4.8 -build +nls -static 0 kB [ebuild N ] dev-lang/tcl-8.4.9 -threads 0 kB [ebuild N ] sys-devel/gnuconfig-20050324 0 kB [ebuild N ] sys-libs/readline-5.0-r2 0 kB (...) All

[gentoo-user] Re: migrating to gcc-3.4.4

2005-08-24 Thread Fernando Meira
-build -static 0 kB [ebuild N ] app-arch/cpio-2.6-r4 +nls 0 kB [ebuild N ] sys-apps/texinfo-4.8 -build +nls -static 0 kB [ebuild N ] dev-lang/tcl-8.4.9 -threads 0 kB [ebuild N ] sys-devel/gnuconfig-20050324 0 kB [ebuild N ] sys-libs/readline-5.0-r2 0 kB (...) All with N!! I understand

[gentoo-user] lzma-utils vs xz-utils

2009-09-13 Thread Philip Webb
-r1 (app-arch/lzma-utils) sys-apps/sandbox-2.0 (app-arch/lzma-utils) sys-apps/texinfo-4.13 (app-arch/lzma-utils) sys-devel/m4-1.4.12 (app-arch/lzma-utils) sys-kernel/linux-headers-2.6.27-r2 (app-arch/lzma-utils) sys-libs/gpm-1.20.5 (app-arch/lzma-utils) Can anyone explain what's going

Re: [gentoo-user] gcc-4.5.4 failed (install phase)

2013-04-08 Thread Markos Chandras
-4.5.4/work/gcc-4.5.4 cp: cannot stat ‘/var/tmp/portage/sys-devel/gcc-4.5.4/work/build/gcc/doc/*.info’: No such file or directory This is because of texinfo-5.1. There was already a bug about it https://bugs.gentoo.org/show_bug.cgi?id=464008 Please sync your tree and try again -- Regards

Re: [gentoo-user] gcc-4.5.4 failed (install phase)

2013-04-08 Thread covici
/sys-devel/gcc-4.5.4/work/build /var/tmp/portage/sys-devel/gcc-4.5.4/work/gcc-4.5.4 cp: cannot stat ‘/var/tmp/portage/sys-devel/gcc-4.5.4/work/build/gcc/doc/*.info’: No such file or directory This is because of texinfo-5.1. There was already a bug about it https://bugs.gentoo.org

Re: [gentoo-user] updating netbook : C Compiler can't create executables : solved

2015-01-26 Thread Philip Webb
/libgmp.so.3', which pleases Gcc, which is now recompiling itself (estimate 3 h 30 m ), after wh all sb well. To be on the safe side, I first updated zip mpc mpfr texinfo flex , which are also requirements of Gcc have newer versions. Thanks for advice, even if it was off-target this time (smile

[gentoo-user] Re: writing man pages (gentoo conventions)

2015-06-03 Thread James
page format (and other format). Pod leaves me with too many choices. Can you narrow it down? eix -3 pod returns nothing. An overlay perhaps? For other formats, there are also tools like docutils or texinfo. If you want something which should eventually be printed (on paper), I would strongly

Re: [gentoo-user] perl-cleaner output

2016-10-24 Thread Andrew Savchenko
g/ and > * report that perl-cleaner needed to reinstall the following list: > *sys-apps/texinfo:0 > dev-perl/libintl-perl:0 > dev-perl/Text-Unidecode:0 > dev-perl/Locale-gettext:0 > dev-perl/Unicode-EastAsianWidth:0 > dev-perl/XML-Parser:0 > > > > I'm happy to fil

Re: [gentoo-user] Few blockers left

2017-03-27 Thread thelma
se. > > You can use etc-update or equivalent to do that. > >> I just added to make.conf >> ABI_X86="32 64" > > You can do that, but it build a lot of 32 bit libraries that you don't > need, significantly increasing build times. That is true, so how do

Re: [gentoo-user] Helvetica fonts

2017-03-07 Thread thelma
texlive-fontutils dev-texlive/texlive-genericrecommended dev-texlive/texlive-htmlxml dev-texlive/texlive-langenglish dev-texlive/texlive-latex dev-texlive/texlive-latexrecommended dev-texlive/texlive-metapost dev-texlive/texlive-pictures dev-texlive/texlive-texinfo Maybe I'm missing something. -- Thelma

Re: [gentoo-user] perl-cleaner oddities

2017-07-16 Thread Mick
On Sunday 16 Jul 2017 09:00:12 tu...@posteo.de wrote: > Hi, > > Again I have problems with screen and lynx to build based > on some texinfo related reason. I learned from posting, that > the real culprit is perl here and I have to run perl-cleaner --all > for this to go away. &g

Re: [gentoo-user] Re: emerge nano ?

2008-05-11 Thread Dani Crisan
/Makefile config.status: creating doc/man/fr/Makefile config.status: creating doc/syntax/Makefile config.status: creating doc/texinfo/Makefile config.status: creating m4/Makefile config.status: creating po/Makefile.in config.status: WARNING: po/Makefile.in.in seems to ignore the --datarootdir setting

[gentoo-user] Problems with bootstrap stage1, emerge errors

2009-04-08 Thread HObbES
* Using os-headers : virtual/os-headers * Using binutils : binutils * Using gcc: gcc * Using libc : virtual/libc * Using texinfo: sys-apps/texinfo * Using zlib : zlib * Using ncurses: ncurses

[gentoo-user] perl-cleaner output

2016-10-07 Thread Daniel Frey
to 5.22.0) , * and have run perl-cleaner _after_ that update, then this means most likely * that these packages are buggy. Please file a bug on http://bugs.gentoo.org/ and * report that perl-cleaner needed to reinstall the following list: *sys-apps/texinfo:0 dev-perl/libintl-perl:0 dev

Re: [gentoo-user] Downgrading glibc prevented by emerge/portage...but why initiated?

2017-09-12 Thread tuxic
Hi, WRONG! :) :) :) I did something different, but it was the same amount of "wrong". I masked =sys-libs/glibc-2.25-r4. And now I remember why I did this: It gave a compilation error: (As some other packages) it has problems with my texinfo installation as it seems. As suggested

Re: [gentoo-user] Re: Cannot compile texinfo: Illegal instruction - Wrong -march and -mtune flags?

2007-08-02 Thread Florian Philipp
Am Donnerstag 02 August 2007 23:36 schrieb Alexander Skwar: · Florian Philipp [EMAIL PROTECTED]: You see, they are not compatible and even if some code works I wouldn't bet multimedia apps will perform well. With -mtune the instruction set stays the same. It is just rearranged. Hm.

[gentoo-user] Re: Gentoo's advantage: 'optimized for your system' -- huh?

2009-02-06 Thread Harry Putnam
me that the tools RMS has participated in are serious tools and well developed always heavy on documentation. Emacs has very good documentation in a variety of places and formats. But getting to the point about `info'. The texinfo format is an excellent one for handling text only documentation

Re: [gentoo-user] Query: any good venue for sample lexyacc or flexbison programs

2008-09-02 Thread Etaoin Shrdlu
; the documentation is very old-style UNIX in general, and very hard to learn the necessary fixes from it. 4 They are old and fail on modern versions of the software 5 They are just plain broken This applies to examples in the texinfo pages, the 2003 O'Reilly book, and online manuals. This is a very

Re: [gentoo-user] Query: any good venue for sample lexyacc or flexbison programs

2008-09-02 Thread Kevin O'Gorman
in the texinfo pages, the 2003 O'Reilly book, and online manuals. This is a very serious problem for learning these tools in their combined form. I'm relatively good at dealing with such stuff (having decades of practice), but I would not expect my undergrads to be able to learn with these materials. I

[gentoo-user] glibc fail on rebuild

2006-05-28 Thread Stuart Howard
+crypt -debug -gnokii -kdeenablefinal -kdehiddenvisibility +pda* -xinerama 0 kB [nomerge ] sys-apps/man-pages-2.31 +nls [nomerge ] sys-apps/man-1.6-r1 +nls [nomerge ] sys-apps/groff-1.19.1-r2 +X [nomerge ]sys-apps/texinfo-4.8-r2 -build +nls -static [nomerge ] sys

[gentoo-user] www-apps/mediawiki-1.14.1 Circular Dependencies with Math Use Flag

2009-08-18 Thread Ryan Holt
[ebuild N] dev-texlive/texlive-genericrecommended-2008 USE=-doc -source 202 kB [ebuild N] dev-texlive/texlive-texinfo-2008 USE=-doc -source 77 kB [ebuild N] dev-texlive/texlive-latexrecommended-2008-r2 USE=-doc -source 971 kB [ebuild N] virtual/texi2dvi-0 0 kB [ebuild N

Re: [gentoo-user] Re: Cannot compile texinfo: Illegal instruction - Wrong -march and -mtune flags?

2007-08-02 Thread Daniel da Veiga
On 8/2/07, Florian Philipp [EMAIL PROTECTED] wrote: Am Donnerstag 02 August 2007 23:36 schrieb Alexander Skwar: · Florian Philipp [EMAIL PROTECTED]: You see, they are not compatible and even if some code works I wouldn't bet multimedia apps will perform well. With -mtune the

Re: [gentoo-user] Re: Cannot compile texinfo: Illegal instruction - Wrong -march and -mtune flags?

2007-08-03 Thread Florian Philipp
Am Freitag 03 August 2007 03:06 schrieb Daniel da Veiga: On 8/2/07, Florian Philipp [EMAIL PROTECTED] wrote: Am Donnerstag 02 August 2007 23:36 schrieb Alexander Skwar: · Florian Philipp [EMAIL PROTECTED]: You see, they are not compatible and even if some code works I wouldn't bet

Re: [gentoo-user] Corruption in reiserfs partition

2007-09-10 Thread Jorge Peixoto de Morais Neto
/texinfo-filter.info: 914 Most of these things are not essential; the big exception is the things in /bin. So it does seem that the system is fixable. Something else that I wanted to ask: this backup that I made after the screwup but before rebuild-tree, do you think it is reliable? -- Software is like

Re: [gentoo-user] which package contains latex stmaryrd.sty

2009-04-10 Thread Stroller
These are the packages that would be merged, in order: Calculating dependencies... done! [ebuild N] dev-texlive/texlive-texinfo-2008 USE=-doc -source 77 kB [ebuild N] dev-tex/xcolor-2.11 729 kB ... [ebuild N] dev-tex/latex-beamer-3.07 USE=-doc -examples -lyx 2,336 kB [ebuild N] app-text

Re: [gentoo-user] www-apps/mediawiki-1.14.1 Circular Dependencies with Math Use Flag

2009-08-18 Thread Alan McKinnon
[ebuild N] dev-texlive/texlive-latex-2008-r1 USE=-doc -source 952 kB [ebuild N] dev-texlive/texlive-genericrecommended-2008 USE=-doc -source 202 kB [ebuild N] dev-texlive/texlive-texinfo-2008 USE=-doc -source 77 kB [ebuild N] dev-texlive/texlive-latexrecommended-2008-r2 USE

Re: [gentoo-user] no-emul profiles

2014-11-19 Thread Marc Joliet
support. I needed to upgrade 5 packages, of which four (gnutls, texinfo, nettle, and libSM) have open stabilisation bugs. The one without was wine, but I don't mind in its case. After that and adding lots of abi_x86_32 USE flags, portage was able to sort out all blockers by itself and emerge @world

Re: [gentoo-user] no-emul profiles

2014-11-20 Thread Gevisz
packages, of which four (gnutls, texinfo, nettle, and libSM) have open stabilisation bugs. Does not this mean that it is a bit experimental? The one without was wine, but I don't mind in its case. After that and adding lots of abi_x86_32 USE flags, portage was able to sort out all blockers

[gentoo-user] texlive-core - poppler / xpdf missing library

2015-09-01 Thread thelma
' '--with-system-cairo' '--with-system-pixman' '--with-system-zziplib' '--with-system-libpaper' '--without-texinfo' '--disable-dialog' '--disable-multiplatform' '--enable-epsfwin' '--enable-mftalkwin' '--enable-regiswin' '--enable-tektronixwin' '--enable-unitermwin' '--with-ps=gs' '--disable-psutils

Re: [gentoo-user] glibc-2.24-r2 failed (install phase)

2017-06-15 Thread Mike Gilbert
kefile:215: manual/subdir_install] Error 2 > make[1]: Leaving directory > '/var/tmp/portage/sys-libs/glibc-2.24-r2/work/glibc-2.24' > make: *** [Makefile:12: install] Error 2 > * ERROR: sys-libs/glibc-2.24-r2::gentoo failed (install phase): > * emake failed > * > > If anything mo

[gentoo-user] newbie broke something

2008-09-11 Thread RYAN vAN GINNEKEN
[nomerge ] sys-apps/acl-2.2.47 USE=nls (-nfs) [ebuild N] sys-devel/libtool-1.5.26 USE=-vanilla [ebuild N]sys-devel/automake-1.10.1 [ebuild N] sys-apps/texinfo-4.11-r1 USE=nls -static [nomerge ] dev-lang/python-2.5.2-r7 USE=berkdb gdbm ipv6 ncurses readline ssl

Re: [gentoo-user] Corruption in reiserfs partition

2007-09-10 Thread Volker Armin Hemmann
/aspell-0.60/iso-8859-10.cmap: 31046 /media/hda2/usr/lib/aspell-0.60/iso-8859-10.cset: 14259 /media/hda2/usr/lib/aspell-0.60/texinfo-filter.info: 914 start with emerging coreutils and go on from that point. Most of these things are not essential; the big exception is the things in /bin. So

[gentoo-user] after an update i can't boot my kernel anymore

2006-03-20 Thread Keats
-1.3.13-r1 [1.3.12-r6] [ebuild U ] sys-devel/m4-1.4.4 [1.4.3] [ebuild U ] sys-devel/bison-2.1 [1.875d] [ebuild U ] sys-apps/sed-4.1.4-r1 [4.1.4] [ebuild U ] sys-apps/texinfo-4.8-r3 [4.8-r2] [ebuild U ] sys-devel/gcc-3.4.5 [3.4.4-r1] [ebuild U ] sys-kernel/linux-headers

Re: [gentoo-user] after an update i can't boot my kernel anymore

2006-03-20 Thread Ghaith Hachem
U ] sys-apps/texinfo-4.8-r3 [4.8-r2] [ebuild U ] sys-devel/gcc-3.4.5 [3.4.4-r1] [ebuild U ] sys-kernel/linux-headers-2.6.11-r3 [2.6.11-r2] [ebuild N] sys-libs/timezone-data-2006b [ebuild U ] sys-libs/glibc-2.3.6-r3 [2.3.5-r2] [ebuild U ] sys-devel/gettext-0.14.5 [0.14.4

[gentoo-user] kde-env blocks kdelibs-3.5.5-r5

2006-11-13 Thread Mick
-3.5.2-r6) 1163413440: unmerge success: kde-base/kdelibs-3.5.2-r6 1163413440: *** exiting successfully. 1163413440: *** terminating. === Then I carried on with updating world: emerge (1 of 11) sys-apps/texinfo-4.8-r5 emerge (2 of 11) sys-devel

[gentoo-user] Re: Where does sudo get the PATH ?

2012-10-12 Thread Nicolas Richard
/profile/package.provided:dev-texlive/texlive-texinfo-2011 portage/profile/package.provided:# dev-texlive/texlive-latex3-2011 portage/profile/package.provided:# dev-texlive/texlive-fontsextra-2011 portage/profile/package.provided:# dev-texlive/texlive-latexextra-2011 portage/profile/package.provided

Re: *****SPAM***** Re: [gentoo-user] texlive-core - poppler / xpdf missing library

2015-09-01 Thread thelma
pathsea' '--with-kpathsea-includes=/usr/include' '--with-system-icu' '--with-system-ptexenc' '--with-system-harfbuzz' '--with-system-icu' '--with-system-graphite2' '--with-system-cairo' '--with-system-pixman' '--with-system-zziplib' '--with-system-libpaper' '--without-texinfo' '--disable-dialog'

Re: [gentoo-user] GDTextUtil doesn't compile after Perl upgrade from 5.20.2 to 5.22.2

2016-10-02 Thread Matthias Hanft
t; No outdated packages were found on your system. [...some unimportant messages...] * Locating packages for an update * Locating ebuilds linked against libperl * Adding to list: sys-apps/texinfo:0 * Adding to list: app-editors/vim:0 * Adding to list: mail-filter/spamassassin:0 * Addin

  1   2   >