On Sep 5, 2012, at 7:26 AM, Mike Orr wrote:
I also need somebody to help
replace a power switch in a desktop PC. The on/off button is flaky,
and the case manufacturer sent me a replacement front panel with a new
power switch, but I need help installing it because the last time I
dealt with a power switch it was gnarly.
First you need to down load a copy of your motherboard manual.
The model number is etched on to the board and with a little Goggling
you will find it.
Without knowing what the MB pins are, you are some what stuck.
Unless you can read 1 point type etched on to a mother board that
is...... :-)
In the manual will be the pin out order used by your MB to connect the
switch leads up to.
The switch your case maker sent you should also be clearly marked with
what those leads are for.
Get the manual and look at your mother board and I bet you will be
able to do this yourself in no time flat.
Hey if I can do it any one can.
-Kevin
Kevin LaTona
STUDIO SOLA
Web | Mobile Development
Seattle WA USA
http://kevinlatona.com/
http://studiosola.com/
http://linkedin.com/in/kevinlatona
