The whole disk is /dev/hdd; the first partition is /dev/hdd1.  Try
partitioning the disk again; then create the file system on the first
partition, instead of on the whole disk, with "mkfs /dev/hdd1" instead of
"mkfs /dev/hdd".  Although it takes much longer, you might consider
"mkfs -c /dev/hdd1" to check for bad blocks before building the file 
system.

On Fri, 21 Jun 2002, Laxman Buneti wrote:

> 
> Hello everyone,
> 
> I have tried to install a new 120 gb hd on my rh 7.1 machine.Following are 
> the steps I have taken,
> 
> 1)I have physically attached the hd
> 2)rebooted the system and the kernel recognised the hd as hdd
> 3)partitioned the disk using fdisk.(I made a primary partition of 100 gb and 
> left the rest as free space).
> 4)created the file system using
> 
>                mkfs /dev/hdd
>          for this I got a final message saying as,
>     illegal triply indirect block found while setting bad block inode.
> 5)then i created a directory and tried to mount the partition using,
>        mount -t ext2 /dev/hdd /mnt/drive3
>       result:
>          mount:wrong fs type bad partition,
>                 bad superblock on /dev/hdd or
>                 too many mounted file systems
> 
> 
> After this I rebooted and the dmesg command shows the hdd space around 33000 
> MB (originally it was showing 120000 which is the correct value).
> 
> I have tried to delete and add partitons again but its the same result.
> 
> Any help on this is appreciated.Or please suggest me a good book to read for 
> this.
> 
> I may have not given the entire info of my problem and Iam willing to give 
> should you guys need to solve this problem.
> 
> OUTPUT OF dmesg(partial)
> 
> 
>             hda: IBM-DTLA-307015, ATA DISK drive
> hdb: CDU5211, ATAPI CD/DVD-ROM drive
> hdc: WDC WD400BB-32AUA1, ATA DISK drive
> hdd: ÿDÿ ÿDÿ2ÿ0ÿBÿ7ÿCÿAÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: 30003120 sectors (15362 MB) w/1916KiB Cache, CHS=1867/255/63,
> UDMA(33)
> hdc: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63,
> UDMA(33)
> hdd: 66059280 sectors (33822 MB) w/32640KiB Cache, CHS=65535/16/63,
> UDMA(33)
> Partition check:
> hda: hda1 hda2 < hda5 >
> hdc: [PTBL] [4865/255/63] hdc1
> hdd:hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hdc: DMA disabled
> ide1: reset: success
> hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
> ide1: reset: success
> hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
> end_request: I/O error, dev 16:40 (hdd), sector 0
> unable to read partition table
> 
> 
> hdb: ATAPI 52X CD-ROM drive, 120kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.12
> hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
> ide1: reset: success
> hdd: unknown partition table
> hdd: unknown partition table
> 
> 
> thats it,
> 
> bye,
> laxman
> 
> 
> 
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.
> 
> 
> 
> _______________________________________________
> Seawolf-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/seawolf-list
> 

-- 
Steven Yellin




_______________________________________________
Seawolf-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/seawolf-list

Reply via email to