Jason,
I understood what you were trying to do when you first mailed the list. I
provided a suggestion (invoking ssh with -vvv) as to how to further
troubleshoot the problem. You should do something like this:
Test 1:
(with ssh_config ForwardAgent=yes)
desktop$ ssh -vvv server1
server1$ ssh server2
Test 2:
(with ssh_config ForwardAgent=yes)
desktop$ ssh server1
server1$ ssh -vvv server2
The debug output can be overwhelming, so it is good to isolate the output to
individual hops. The debug info should tell you what was sent, who got it, and
where there is a hold-up.
As for my question on the public keys, I wanted to know if the key for one user
was the same for another. Forwarding the Agent will allow for added
private-keys to be used via the forward. If the users on the second hop do not
have a valid public-key, then the forwarding will not work.
I tested that setting ForwardAgent=yes does work from my desktop system to a
intermediate server and then the final destination. The Desktop had the valid
private key and the intermediate and final destination had the corresponding
public-key. It worked.
Then again, I am using non-red-hat systems. I hope my email gives you hope and
another avenue for troubleshooting your problem.
John H.
On Thu, 5 Oct 2006, Jason Powers wrote:
Date: Thu, 05 Oct 2006 13:28:34 -0400
From: Jason Powers <[EMAIL PROTECTED]>
To: John Paul Heaton <[EMAIL PROTECTED]>
Cc: [email protected]
Subject: Re: Agent Forwarding Question for the list
I'm not making keys for these service users. I'm going to use them to run
scripts and monitors in the way our present (RH7.2-based) setup does. I put
my public key in the .ssh/authorized_keys file for each of these users. I
have to run ssh-agent/ssh-add on my local machine, then I can jump right into
the first server as whichever service user account I've set up this way. That
part already works. It's hopping to the next server that asks for a password.
Most of the documentation I found suggests it's possible to do this, and I
can already do it with ssh-3.2.9-1 on our old setup. I wonder if there is
something specific about redhat's build of openssh or pam that will intercept
these requests, or if there is a directive I must set in
ssh_config|sshd_config or /etc/pam.d/sshd to allow it. Our old setup also
allows jumping to/through root users, but there may be different rules for
that in a Fedora 5 configuration as well.
When I'm running tails on all the logs, the ssh connection reqest never shows
up on the second server, so I strongly suspect that PAM is intercepting the
request and asking for a password. However, I was determined to ask the
experts in case it was a common mistake or something that simply is not
possible under openssh.
By setting my public key in system users I should be able to jump from one
machine to the next, or scp files around. Say in the ideal setup for
development servers I'd have a cronuser, scriptuser, monitoruser, cvsuser,
and root (I know it's poor security) all configured with my public key and
that I could jump in and out of each not only from my own Linux Desktop, but
through each user to each user on other servers in the development chain.
After reading all the documentation and FAQs I could find, I had assumed
ssh-agent on the desktop and agent forwarding on the servers would be
sufficient, but something is blocking the forwarding, or I'm way off and this
isn't how it's meant to work.
Thanks
Jason Powers
John Paul Heaton wrote:
You can get a detailed idea of what ssh is doing by using the -v flag. You
can get more detail by using more v's, up to three, like -vvv. It is a a
good way to see what ssh is doing.
As for your problem, does the "otheruser" have the same public-key as
"someuser" in the authorized_keys file?
John
On Wed, 4 Oct 2006, Jason Powers wrote:
Date: Wed, 04 Oct 2006 18:18:02 -0400
From: Jason Powers <[EMAIL PROTECTED]>
To: [email protected]
Subject: Agent Forwarding Question for the list
Resent-Date: Thu, 5 Oct 2006 08:53:26 -0600 (MDT)
Resent-From: [EMAIL PROTECTED]
I have looked through the archives and googled this pretty thoroughly, I'm
having a tough time finding someone else who has asked the same question
previously. There's a lot of information about openssh, but surprisingly
little detail about port forwarding. Either it works for everyone all the
time, or my configuration is a little bit particular compared to others.
We would like to change from ssh2 to openssh for all of our linux servers.
I am testing new equipment with Fedora Core 5 with openssh configured out
of the box. I have no need to forward X11 windows, I just want to be able
to jump from machine to machine with a terminal, ssh and scp, and use
different accounts without having to type a password. A lot of our
production process revolves around this, so it pretty much has to work for
me to convert us.
I made users and keys with openssh instead of using the old ones, put them
in the accounts I wanted to jump to on multiple servers. I set the perms
on the authorized_keys files to 600. I set the ssh_config file in /etc/ to
say ForwardAgent yes.
Now let's say that I have a linux desktop and two linux servers, assuming
I've configured things correctly, then from the desktop box I should be
able to:
[EMAIL PROTECTED]> ssh-add
(type pass for key)
[EMAIL PROTECTED]> ssh [EMAIL PROTECTED]
now from that terminal
[EMAIL PROTECTED]> ssh [EMAIL PROTECTED]
It asks me for a password when I try to jump to the second server. I can
put the password in and it works, but I think at this point it should be
forwarding the key.
I have tail -f running on the secure log on each machine in question so I
can see if there's anything happening.
It does not enter into the log on the target machine that I am attempting
to open a connection while it waits for a password, so I was thinking that
pam may be intercepting the request and demanding one.
Has anyone known pam to do such a thing?
Am I seeing a common non-error?
Is this a situation where ssh-agent on the servers may be interfering with
the one from the desktop?
Do I have to turn on X11forwarding to get agent forwarding on these
servers, which don't even have x installed?
Does this have something to do with xauth on the servers, or is that only
for x11 forwarding?
Thanks
Jason Powers
--------------------------------------------
-- John Heaton - Computer System Engineer --
-- George Mason University --
-- Information Technology Unit --
-- Systems Engineering (ESM) --
-- * email: [EMAIL PROTECTED] --
-- * phone: 703.993.3558 --
--------------------------------------------
--------------------------------------------
-- John Heaton - Computer System Engineer --
-- George Mason University --
-- Information Technology Unit --
-- Systems Engineering (ESM) --
-- * email: [EMAIL PROTECTED] --
-- * phone: 703.993.3558 --
--------------------------------------------
