Hi Christian, First of all I've made a mistake. I meant 192.168.1.0/24, not 192.168.1.0/8, but that doesn't change anything relevant.
On Mon, Jul 7, 2008 at 6:54 PM, Christian Grunfeld <[EMAIL PROTECTED]> wrote: > Hi, > > the network should be the same on both ends but tunnel interfaces > should be diferent. I'm not sure what you mean. The tunnel interfaces obviously must be different logically, because a connection has two endpoints and two distinct interfaces must represent them, even if they can be named the same, like tun1 and tun1. I have two networks and both of them have the network address of 192.168.1.0/24 and 192.168.1.0/24. This is what I meant. I know that they'll be merged once the VPN is set up. My experience is that SSH VPN doesn't work in this situation, see my previous mail. This is pretty unpleasant since most of the LANs I've encountered are either 192.168.0.0/24 or 192.168.1.0/24 and changing their network addresses is an administrative pain. Correct me if I'm wrong, though. I think I'll give OpenVPN a try. > 2008/7/7 László Monda <[EMAIL PROTECTED]>: >> Hi List, >> >> I'm trying to build an SSH VPN based on the >> https://help.ubuntu.com/community/SSH_VPN Ubuntu howto, but can't get >> it done. >> >> After setting up the VPN and trying to connect to the remote host >> which is now on my virtual network I realize that I actually connect >> to localhost. >> >> This may be because the remote network and the local network are both >> 192.168.1.0/8. Do the network adresses of the networks in question >> need to differ? >> >> Thanks in advance! >> >> -- >> Laci <http://monda.hu> >> > -- Laci <http://monda.hu>
