Guys, - Forget this problem. I figured out what is. The permissions in the file autorized_keys. It was allowing other to write int he files. That why it did not worked.
Sorry for this... Regards... -- Helio Campos 2010/1/7 Helio Campos Mello de Andrade <[email protected]> > Sorry, > > - I forgot to send the debug. > - Obfuscating the personal information of the output i discovered that he > tries to test the key for ssh-v1 and ssh-v2 but it did not get a success. > > <remote_user> - The user name of the remote user in the remote server; > <remote_address> - The ip of the remote server; > <local_home> - The "ḧome" of the local user; > > $ ssh -Y -vvv <remote_user>@<remote_address> > OpenSSH_4.5p1 FreeBSD-20061110, OpenSSL 0.9.8e 23 Feb 2007 > debug1: Reading configuration data /etc/ssh/ssh_config > debug2: ssh_connect: needpriv 0 > debug1: Connecting to <remote_address> [<remote_address>] port 22. > debug1: Connection established. > debug1: identity file <local_home>/.ssh/identity type -1 > debug3: Not a RSA1 key file <local_home>/.ssh/id_rsa. > debug2: key_type_from_name: unknown key type '-----BEGIN' > debug3: key_read: missing keytype > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug3: key_read: missing whitespace > debug2: key_type_from_name: unknown key type '-----END' > debug3: key_read: missing keytype > debug1: identity file <local_home>/.ssh/id_rsa type 1 > debug1: identity file <local_home>/.ssh/id_dsa type -1 > debug1: Remote protocol version 1.99, remote software version OpenSSH_3.9p1 > debug1: match: OpenSSH_3.9p1 pat OpenSSH_3.* > debug1: Enabling compatibility mode for protocol 2.0 > debug1: Local version string SSH-2.0-OpenSSH_4.5p1 FreeBSD-20061110 > debug2: fd 3 setting O_NONBLOCK > debug1: SSH2_MSG_KEXINIT sent > debug1: SSH2_MSG_KEXINIT received > debug2: kex_parse_kexinit: > diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 > debug2: kex_parse_kexinit: ssh-dss,ssh-rsa > debug2: kex_parse_kexinit: > aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc, > [email protected],aes128-ctr,aes192-ctr,aes256-ctr > debug2: kex_parse_kexinit: > aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc, > [email protected],aes128-ctr,aes192-ctr,aes256-ctr > debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160, > [email protected],hmac-sha1-96,hmac-md5-96 > debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160, > [email protected],hmac-sha1-96,hmac-md5-96 > debug2: kex_parse_kexinit: none,[email protected],zlib > debug2: kex_parse_kexinit: none,[email protected],zlib > debug2: kex_parse_kexinit: > debug2: kex_parse_kexinit: > debug2: kex_parse_kexinit: first_kex_follows 0 > debug2: kex_parse_kexinit: reserved 0 > debug2: kex_parse_kexinit: > diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 > debug2: kex_parse_kexinit: ssh-rsa,ssh-dss > debug2: kex_parse_kexinit: > aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc, > [email protected],aes128-ctr,aes192-ctr,aes256-ctr > debug2: kex_parse_kexinit: > aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc, > [email protected],aes128-ctr,aes192-ctr,aes256-ctr > debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160, > [email protected],hmac-sha1-96,hmac-md5-96 > debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160, > [email protected],hmac-sha1-96,hmac-md5-96 > debug2: kex_parse_kexinit: none,zlib > debug2: kex_parse_kexinit: none,zlib > debug2: kex_parse_kexinit: > debug2: kex_parse_kexinit: > debug2: kex_parse_kexinit: first_kex_follows 0 > debug2: kex_parse_kexinit: reserved 0 > debug2: mac_init: found hmac-md5 > debug1: kex: server->client aes128-cbc hmac-md5 none > debug2: mac_init: found hmac-md5 > debug1: kex: client->server aes128-cbc hmac-md5 none > debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent > debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP > debug2: dh_gen_key: priv key bits set: 123/256 > debug2: bits set: 508/1024 > debug1: SSH2_MSG_KEX_DH_GEX_INIT sent > debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY > debug3: check_host_in_hostfile: filename <local_home>/.ssh/known_hosts > debug3: check_host_in_hostfile: match line 4 > debug1: Host '<remote_address>' is known and matches the DSA host key. > debug1: Found key in < local_home >/.ssh/known_hosts:4 > debug2: bits set: 516/1024 > debug1: ssh_dss_verify: signature correct > debug2: kex_derive_keys > debug2: set_newkeys: mode 1 > debug1: SSH2_MSG_NEWKEYS sent > debug1: expecting SSH2_MSG_NEWKEYS > debug2: set_newkeys: mode 0 > debug1: SSH2_MSG_NEWKEYS received > debug1: SSH2_MSG_SERVICE_REQUEST sent > debug2: service_accept: ssh-userauth > debug1: SSH2_MSG_SERVICE_ACCEPT received > debug2: key: <local_home>/.ssh/identity (0x0) > debug2: key: <local_home>/.ssh/id_rsa (0x81742920) > debug2: key: <local_home>/.ssh/id_dsa (0x0) > debug1: Authentications that can continue: > publickey,gssapi-with-mic,password > debug3: start over, passed a different list > publickey,gssapi-with-mic,password > debug3: preferred publickey,keyboard-interactive,password > debug3: authmethod_lookup publickey > debug3: remaining preferred: keyboard-interactive,password > debug3: authmethod_is_enabled publickey > debug1: Next authentication method: publickey > debug1: Trying private key: <local_home>/.ssh/identity > debug3: no such identity: <local_home>/.ssh/identity > debug1: Offering public key: <local_home>/.ssh/id_rsa > debug3: send_pubkey_test > debug2: we sent a publickey packet, wait for reply > debug1: Authentications that can continue: > publickey,gssapi-with-mic,password > debug1: Trying private key: <local_home>/.ssh/id_dsa > debug3: no such identity: <local_home>/.ssh/id_dsa > debug2: we did not send a packet, disable method > debug3: authmethod_lookup password > debug3: remaining preferred: ,password > debug3: authmethod_is_enabled password > debug1: Next authentication method: password > <remote_user>@<remote_address>'s password: > > - Does someone have any clue? > > Regards... > > 2010/1/7 Helio Campos Mello de Andrade <[email protected]> > > Hi guys, >> >> - I'm trying to make a configuration that i've done too many time. I >> wan't a script to execute a command in a remote server without the need to >> type or pass the password. >> - I'm using the follow commands: >> >> ssh-keygen >> scp .ssh/id_rsa <remote_user>@<remote_machine>:~/ >> ssh <remote_user>@<remote_machine> "cat ~/.id_rsa >> >> ~/.ssh/authorized_keys" >> # Here i still neeed to use my password but thats right. >> ssh <remote_user>@<remote_machine> >> # Here i still neeed to use my password and that's not good >> because i already typed the command to add the public key from my local user >> in the remote machine. >> >> - Does someone has any idea of what i'm doing wrong? I did it may time >> before and always worked. Does someone know if i have to make some >> modification at the /etc/ssh/ssd_config of my local machine or the >> /etc/ssh/sshd_config of my remote machine for this to work? >> - My local machine is a "FreeBSD 7.0-RELEASE-p1 generic amd64" and the >> ssh is "OpenSSH_4.5p1 FreeBSD-20061110, OpenSSL 0.9.8e 23 Feb 2007". >> - The remote machine is a "Red Hat Enterprise Linux ES release 4 (Nahant >> Update 5)" and the ssh version is "OpenSSH_3.9p1, OpenSSL 0.9.7a Feb 19 >> 2003". >> >> -- >> Helio Campos Mello de Andrade >> > > > > -- > Helio Campos Mello de Andrade > -- Helio Campos Mello de Andrade
