Matt,
To do full diagnosis, do captures at both ends:
tcpdump -w client.pcap -s0 host <IP> and port 22
## so that we don't capture unnecessary stuff, if you are at the client, the
<IP> should be the server side
At server side,
tcpdump -w server.pcap -s0 host <IP> and port 22
## so that we don't capture unnecessary stuff, if you are at the server, the
<IP> should be the client side
Upload the {client,server}.pcap somewhere and provide the links, that way
someone might be able to take a look at it.
This is one thing you can give it a try easily:
Certain network devices I have seen have bugs dealing with TCP SACK.
CentOS 5.3 comes enabled with TCP SACK.
As root, try issuing "sysctl -w net.ipv4.tcp_sack=0", then scp to check if
turning SACK off resolve your issues.
Robin
________________________________________
From: [email protected] [[email protected]] On Behalf Of
Matthew Case [[email protected]]
Sent: Tuesday, March 09, 2010 12:44 PM
To: [email protected]
Subject: Question about SCP stalling over VPN
Greetings,
I am attempting to SSH a series of relatively small files (tens of
megabytes) over a VPN connection to a remote linux server. I am able to
SSH between the servers without a problem, but when I use SCP to copy
the files I start seeing the following message more and more until
finally the copy grinds to a halt and eventually times out:
debug2: channel 0: rcvd adjust 131072
debug2: channel 0: rcvd adjust 131072
debug2: channel 0: rcvd adjust 131072
debug2: channel 0: rcvd adjust 131072
I've looked high and low and haven't really come up with anything
definitive. Someone somewhere had mentioned fiddling with MTU settings,
but I'm not really sure what that will accomplish as I am unfamiliar
with what MTU is and does. If this question has been answered
previously, I apologize ahead of time. Thanks!
I am running CentOS 5.3 with OpenSSH 4.3p2-29 on the server I am copying
the files from, and CentOS 5.4 with OpenSSH 4.3p2.36 on the server I am
copying to.
--
Matthew Case
Specialized Business Software
Software Engineer
SCJP 5 Certified
Phone: 440-542-9145
Fax: 440-542-9143
This message and any files transmitted with it may contain information that is
privileged, confidential, and exempt from disclosure under applicable law.
They are intended solely for the use of the intended recipient. If you are
not the intended recipient, distributing, copying, disclosing, or reliance on
the contents of this communication is strictly prohibited. If this has
reached you in error, kindly destroy this message and notify the sender
immediately. Thank you for your assistance.
We attempt to sweep harmful content (e.g. viruses) from e-mail and attachments,
however we cannot guarantee their safety and can accept no liability for any
resulting damage. The recipient is responsible to verify the safety of this
message and any attachments before accepting them.
