Hi, I was responding to the "Such is not the case. I've done otherwise." Comment below.
-b On Mon, 18 Nov 2002, Eric Schroeder wrote: > You just have to configure ARP properly. > > For example---- > > Internet Router Firewall > End User > 10.1.1.254 10.1.1.58 192.168.1.1 > 192.168.1.51 > > You could use NAT on the firewall to hide everyone behind the IP address > 10.1.1.1. Then you would have to configure the firewall to respond to arp > requests for 10.1.1.1, or you would have to configure the internet router > with a static arp entry for 10.1.1.1. But no one ever needs to know the > actual IP address of the firewall. > > FWIW, > > Eric Schroeder > Satel Corporation > > > > > > Bill Hamel <[EMAIL PROTECTED]> > 11/15/2002 08:42 PM > > > To: Meritt James <[EMAIL PROTECTED]> > cc: [EMAIL PROTECTED], <[EMAIL PROTECTED]>, ><[EMAIL PROTECTED]>, > <[EMAIL PROTECTED]>, <[EMAIL PROTECTED]> > Subject: Re: Company Firewall's IP Address > > > Then routing wise, how do the packets find their way back to the firewall > if they don't know the source IP ? ? > > > On Fri, 15 Nov 2002, Meritt James wrote: > > > Such is not the case. I've done otherwise. > > > > Bill Hamel wrote: > > > > > > Unless I am missing something in the question, no matter what you do, > > > what/whoever you connect to through a firewall will always know the IP > > > address of the the trusted interface of the firewall. > > > > > > -bh > > > > > > On Wed, 13 Nov 2002, Meritt James wrote: > > > > > > > "an" IP Address - not necessarily the originating individual. There > are > > > > a LOT of ways around that. > > > > > > > > Jim > > > > > > > > [EMAIL PROTECTED] wrote: > > > > > > > > > There is nothing new about finding your IP Address and display it > on the web page. > > > > > > > > -- > > > > James W. Meritt CISSP, CISA > > > > Booz | Allen | Hamilton > > > > phone: (410) 684-6566 > > > > > > > > -- > > James W. Meritt CISSP, CISA > > Booz | Allen | Hamilton > > phone: (410) 684-6566 > > > > > > >
