Rule number 1 about cisco devices. DO NOT USE GUI's provided by them (or anyone else for that matter) to configure their devices. The CLI mode will be harder, yes, once you realize how things are done you'll wish you started out that way.
//John -----Original Message----- From: YashPal Singh [mailto:[EMAIL PROTECTED]] Sent: Saturday, October 19, 2002 1:30 AM To: Ahmed.Shazly; [EMAIL PROTECTED] Subject: RE: Can't Resolve from behind firewall I think you have not allowed DNS incoming traffic. To debug your problem allow incoming udp packets from any to your ipaddress. I guess this is the only problem bcoz DNS reply from ur ISP get blocked by your Firewall. Moreover to check that this problem is just bcoz of firewall....put allow all rule at the top and then check if you are able to get DNS replies. Yash -----Original Message----- From: Ahmed.Shazly [mailto:[EMAIL PROTECTED]] Sent: Thursday, October 17, 2002 5:45 AM To: [EMAIL PROTECTED] Subject: Can't Resolve from behind firewall Hi everyone, I Just got a PIX 501 for my company and since they have strict policies i do have to strict usage to port 80, now with the PDM i try permiting outgoing traffic from the my local net on port 80 to any outside port and permit outgoing traffic on port 53 for the DNS to any port since we use the DNS server of our ISP. the only thing that happens is that i still can't resolve websites and they only work if i use their IP addresses. i do use PAT and i'm not sure wheather it has anything to do with whats going on any suggestions? Regards, A.Shazly
