With Cisco switches you and apply IP Permit Filters These are filters to safeguard access to the management sc0 interface via telnet and other protocols. These are particularly important when the VLAN used for management also contains users. Use the following commands to enable IP address and port filtering:
set ip permit enable set ip permit <IP address> <mask> <telnet|ssh|snmp|all> Stephen -----Original Message----- From: David Gillett [mailto:[EMAIL PROTECTED] Sent: Monday, March 03, 2003 1:34 PM To: [EMAIL PROTECTED] Subject: RE: access-list at 4006 catalyst switch? In the Cisco world, access lists are a router feature, and the 4006 does not have a router engine. It does, however, support VLAN trunking. You can get almost all of the functionality you seek by assigning the switch IP address on a "system management" VLAN, and applying an access list to that VLAN at your core router. (You do *have* a router, don't you?) David Gillett > -----Original Message----- > From: SB CH [mailto:[EMAIL PROTECTED] > Sent: March 2, 2003 17:29 > To: [EMAIL PROTECTED] > Subject: access-list at 4006 catalyst switch? > > > Hello all. > > I have a 4006 layer 2 cisco switch which os is catos. > I would like to restrict ip address which can telnet to the switch. > But I can't find any access-list like command at 4006 switch. > Can't I restrict telnet client ip or snmp client ip at 4006? > > Thanks in advance. > > > _________________________________________________________________ > 책상위에 다리 올리고 느긋하게 즐긴다... MSN 온라인 상영관 > http://vod.msn.co.kr >
