Ken,
What type of magnetic susceptibility unit was used to acquire the measurement? I have calibration/ correction factors for most instruments and can provide guidance on the rotary measurements. Were the rotary chip put into bags or done on drill spoils on the ground? Cheers Barry Barry Bourne Principal Consultant Unit 5, 51 Forsyth Street, O'Connor WA 6163 (M) +61 409 493 485 | (E) <mailto:[email protected]> [email protected] (Web) <http://www.terrapetrophysics.com.au> www.terrapetrophysics.com.au From: SEGMIN <[email protected]> On Behalf Of Ken Witherly via SEGMIN Sent: Friday, 26 June 2020 6:32 AM To: [email protected] Cc: Ken Witherly <[email protected]> Subject: [SEGMIN] Mag sus on chips Dear Colleagues We have a client who has a mixture of core and rotary holes and we'd like to be able to 'blend' the mag sus results. Any words of wisdom as to how best to do this would be appreciated. Regards/Ken The Greatest Obstacle to Discovery Is Not Ignorance-It Is the Illusion of Knowledge Condor Consulting, Inc St. 150-2201 Kipling St. Lakewood CO 80215 USA T: 303-423-8475 Condor North Consulting ULC St. 311-409 Granville St. Vancouver BC, V6C 1A3 CANADA T: 604-630-8334
----------------------- SEGMIN community mailing list service ([email protected]). Change your personal options here: https://lists.geosoft.com/mailman/options/segmin/archive%40mail-archive.com Colleagues can join here: https://lists.geosoft.com/mailman/listinfo/segmin Archives: https://lists.geosoft.com/mailman/private/segmin/ NOTE that <Reply> will reply to all members of the list.
