Dear Jorge,
not sure what to say as it seems quite a specific problem with your
computers. It could be that your problem is due to increased dimensions
in the code, but that would only affect some programs.
Any chance that your computer is affected by a virus? I would recommend
to check that and perhaps also run the Microsoft malware check.
Regards,
Lars
On 08/07/10 16:18, [email protected] wrote:
First of all thanks for the interest and answers... I was out of town,
so until now I could answer you.
Dear Lars:
Just a few days after the 8.3 appeared in past june I already tried it
at least in another computer, but then I installed the version 8.2.1
first, with the same symptoms, dirf an another programs were working and
then mulplt crashed, then I thought to upgrade to the new version and
then I uninstalled the 8.2.1 version and installed version 8.3 but I
couldn't checked the status and I assumed it'll be fine. Later I had
news that this PC with the first installation I made with 8.3 was having
the same problem.
Until I have this problem in my own PC I started to remember what
happened then. Actually in my own PC the problem is only with Seisan
8.2.1 and 8.3. At home I have the 8.1.3 and I brought from there the
mulplt.exe executable file and just copied to my PC at work and mulplt
(version 8.1.3) worked just fine!!
As a temporal fix I'm planning to install the 8.1.3 version. But in time
I want to upgrade to 8.3.
About the hardware, well I don't know what to think since I was working
just fine with version, 8.2.1, and as you remember before the first
crash some programs as dirf (version 8.3) worked fine, then after I ran
mulplt, (version 8.3) everything else even the program that were running
all of them crash, even the programs from a clean install from version
8.2.1 .
Maybe I'll need to compile by myself and see where is the problem, I'll
need advice to do it Lars, about what will I need and the step to follow.
Dear Chandan:
Thanks for the time it took to find this answer. But in that link says
that the problem is with Windows NT 4, not windows XP (by the way I have
SP 3 installed). And another thing is that I don't have a soundblaster
soundcard, so I'm afraid that is not the solution for me. Thanks anyway.
It seems that that error appears for different reasons. From problems
with RAM, using Service Pack 2, Registry problems, etc. and the error
has been reported for different executables, even messenger. Anyway, I
already checked all those reported solutions and no one seems to fit my
problem.
I'm confused since in the beggining some commands were working as usual,
but now they all crash...
Best regards,
Jorge Soto Peredo
Oficina de Geofísica --- Departamento de Exploración
Gerencia de Proyectos Geotermoeléctricos
Comisión Federal de Electricidad
email: [email protected]
Tel: (443) 322-7000 ext. 70087 y 70137
Directo (443) 322-7087
Morelia, Michoacán
----- Remitido por Jorge Soto Peredo/GEN/MLM/CFE con fecha 07/07/2010
12:59 p.m. -----
Dear Jorge,
can you try on another computer? I just wonder if your installation of
Version 8.3 coincides with a hardware problem? How about other programs?
Best regards, Lars,
Quoting _jorge.soto04 at cfe.gob.mx_
<http://mailman.uib.no/listinfo/seisan>:
>/ Hi to all Seisan users, /
>/ /
>/ as all of you I'm a user of this amazing tool, since version 5. So
I've /
>/ been in contact with Jens in the past when I've found some bugs, and
as /
>/ always Jens had been so kind to help me as a lot of you too in the
past. /
>/ /
>/ Ok, but now my problems came with this new version 8.3, I recieve the /
>/ error "The application failed to initialize properly (0xc0000005)." /
>/ /
>>/ From this point of view looks like a windows xp problem, somehow we
know /
>/ it, but befora my problem I had a clean installation of windows xp
before /
>/ installing SEISAN. /
>/ /
>/ I installed Seisan 8.3 and I was trying some commands like dirf and
they /
>/ worked several times without any problem! But when I tried mulplt, I /
>/ recieve the message that I describe before: /
>/ /
>/ "The application failed to initialize properly (0xc0000005)." /
>/ /
>/ The problems went from bad to worst, I reinstalled SEISAN 8.3, even
tried /
>/ SEISAN 8.2.1, but in both had the same error, and NOW no matter the /
>/ version I use dirf or any other program don't work either!! That's the /
>/ part of my problem that confuse me the more. Why in the beginning
worked /
>/ some commands and later become spoiled?? /
>/ /
>/ I already did several times a complete uninstall of Seisan, versions
8.3 /
>/ and 8.2.1, even cleaning the registry, and updating the graphic
driver but /
>/ I still have the same problem. /
>/ /
>/ So now I have my Seisan 8.3, but can't make it work, have anyone
some idea /
>/ about this problem? I have no compiler, so I've been cheking for
updates /
>/ and checking the user's list for anyone reporting a similar problem. /
>/ /
>/ Thanks in advance for any advice and help. /
>/ /
>/ Jorge Soto Peredo /
>/ Oficina de Geofísica --- Departamento de Exploración /
>/ Gerencia de Proyectos Geotermoeléctricos /
>/ Comisión Federal de Electricidad /
>/ email: //_jorge.soto04 at cfe.gob.mx_/
<http://mailman.uib.no/listinfo/seisan>/ /
>/ Tel: (443) 322-7000 ext. 70087 y 70137 /
>/ Directo (443) 322-7087 /
>/ Morelia, Michoacán /
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan
