Dear Christian,
Iwould like to tell you what I use to do for setting the enviroment
variables,compiling and Installing SeisAn. Please take into account that the
SeisAn version that I have is 9.0.1
1) Copy the libmseed that is in the SUP directory (it's a gz file) and
uncompress this in the LIB directory. You will get a directory called libmseed
inside LIB.
In an Ubuntu terminal you can use this command:
tar -xvf libmseed-2.5.1.tar.gz
2) Set the environment variables editing the SEISAN.bash file which is located
in the COM directory. You have to specify the compiler in the SEISARCH variable
and the seisan top directory SEISAN_TOP. The SEISARCH uses to be gfortran in
general for 32 or 64 bits architecture.
For example I set in my SEISAN.bash file these
lines:
export SEISARCH="gfortran"
export SEISAN_TOP="/home/billy/seismo"
3) Once the SEISAN.bash file has been edited you have to source this file with
the "source" command (without quotes):
source /home/billy/seismo/COM/SEISAN.bash
4) Now you have to go to the library directory LIB/libmseed directory in order
to compile the miniseed libraries. Just type "make" in the terminal in order to
compile the miniseed libraries.
5) After compiling libmseed it is necessary to return to the seisan library LIB
directory with the command "li". The execute this command:
make ./all
6) Finally It has to be compiled the seisan programs. Go to the PRO directory
with the command "pr" then execute the command:
make ./all
That's all.
I suggest you to set automatically the environment variables putting into the
hidden file .bashrc the linet that source the SEISAN.bash file.
I hope this was helpful.
Regards,
Billy Edson Burgoa Rosso
________________________________
De: "[email protected]" <[email protected]>
Para: [email protected]
Enviado: Martes, enero 10, 2012 7:00 A.M.
Asunto: seisan Digest, Vol 47, Issue 10
Today's Topics:
1. Re: Install Seisan in Ubuntu 10.04 (Christian Escudero)
----------------------------------------------------------------------
Message: 1
Date: Tue, 10 Jan 2012 01:20:13 +0000 (UTC)
From: Christian Escudero <[email protected]>
Subject: Re: [seisan] Install Seisan in Ubuntu 10.04
To: [email protected]
Hello
I had the same problem, then I did as you suggest in your post but then I get
the following:
gfortran -g -c -I../INC -fdollar-ok -fno-automatic -o gfortran/seed.o -fno-
range-check seed.for
seed.for:2505.26:
logical*1 isleap
1
Error: Return type mismatch of function 'isleap' at (1) (LOGICAL(1)/LOGICAL(4))
seed.for:2676.28:
logical*1 calc_rate ! auxiliary function
----------------------------------------------------------------------
Send seisan mailing list submissions
to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.uib.no/listinfo/seisan
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of seisan
digest..."
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan
End of seisan Digest, Vol 47, Issue 10
**************************************
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan
