Greetings, I am confused. Maximize window works well in my Linux and MacOSX workstations, also when working on Windows via ssh with X forwarding from my Linux machine. The time axis stretches according to the width of the window with no problems. Is this desirable behavior abnormal?
Best regards, -- Emanuel Antunes Integrated Master Degree (MSc) in Physics Engineering M.Sc. Thesis - Seismology Laboratory Instituto Superior Técnico (IST) - Lisbon Technical University (UTL) 2012/11/15 Voss, Peter <[email protected]> > Hi Andrey, > > Maximize window does not work on SEISAN for linux/unix. > You can maximum set X_SCREEN_SIZE to 100 (which is 100% of 1024). 1024 is > the hardcoded resolution in SEISAN, so to get full screen you need to > increase the 1024 in the source code, with the resolution of your monitor > and then recompile. But, be careful and cross check that the time of your > phase picking is still ok. > > Good luck, Peter > > -----Oprindelig meddelelse----- > Fra: [email protected] [mailto:[email protected]] På > vegne af Andrey Stepnov > Sendt: 15. november 2012 02:16 > Til: Emanuel Antunes > Cc: [email protected] > Emne: Re: [seisan] graphical issue on high resolution (mulplt, etc) > > Hi, Emanuel! > > We did it on windows (with putty and xming) and linux workstation - the > same result. > It appears only if we do maximize window. > I attach two more screenshots: before maximize and after (mulplt) + xclock > and xcalc in maximize. > > mulplt.def is like default according resolutions and screen size > parametrs. But i think that it's no reason, because epimap has the same > problem. > > Best regards, > Andrey > > On 15.11.2012 11:18, Emanuel Antunes wrote: > > Hello Andrey, > > > > That is most peculiar. Right now I am running mulplt on a 1080p screen > > via SSH with X forward on a Windows system with Xming and PuTTY, I > > never had any issues like that. I am running X.Org X Server 1.12.3 on > > a Debian machine on the server side. > > I also use on a daily basis ssh with X forward on a MacOSX with 720p > > and haven't gotten any issues, I think that if I tried it with a 1080p > > on a mac I wouldn't get any problems either. > > Have you tried accessing via ssh from another client? My guess is the > > issue could be on the client side. But I understand that you might > > think it's an issue with SEISAN configuration as xterm and xclock work > > ok when you fullscreen them. > > On my case I never messed with the screen or resolution parameters on > > SEISAN so it's just like when I compiled it... > > I hope someone has a more meaningul insight, on the matter. > > > > Good luck, > > > > Emanuel Antunes > > -- > > MSc Student at IST-Lisbon Technical University Seismology Laboratory > > > > Em 14-11-2012 23:52, Andrey Stepnov escreveu: > >> Dear Friends! > >> > >> We use seisan on linux with xorg-server 1.12.3-1. Operators takes > >> access via ssh + x forward. So, some operators uses monitors whith > >> resolution > >> 1920x1080 and higher. If operator try to maximize X window (for > >> example mulplt), they get blank area on right side, although the > >> buttons under blank area is still works. > >> Other app (xterm, xclock) works fine. > >> > >> On attached screenshot i have marked the problem. > >> > >> We try to change X_SCREEN_SIZE, RESOLUTIONX, RESOLUTIONHC parametrs. > >> X_SCREEN_SIZE (par1) have set to 90, 80, 100 > >> > >> > >> thanks. > >> > >> > >> Best regards, > >> Andrey Stepnov > >> IMGG FEB RAS > >> > >> > >> _______________________________________________ > >> seisan mailing list > >> [email protected] > >> http://mailman.uib.no/listinfo/seisan > > >
_______________________________________________ seisan mailing list [email protected] http://mailman.uib.no/listinfo/seisan
