bruno

i suspected some pc problem,  but it might not explain all.

Channel # and name not defined in def file:   1 BRBL  B  E

This is actually not an error. gursei finds the correct station name in the file, while in the def file you have given a number, so if you want to change the name from BRBL to something else, you have to write BRBL in def file instead of the number. I am not sure why you earlier got a number and now the correct station name. the station name is in the guralp stream variable. has there been any changes in the guralp setup ?

the other errro is with the response file. gursei is trying to find response file and put it into the converted file. if response file is not there, nothing is put in but it should not crash. the file name it is looking for has a missing \, it is ..calBRBL.. but should be.. cal\BRBL.., not usre why that happens. you could check if SEISAN_TOP env variable is g:\seismo\, use command env.

jens


On Fri, 8 Feb 2013, Bruno Faria wrote:

Dear Jens,

I found out that the problem is with pc configuration, although I don't know
yet which one.

I installed Seisan 9.1 (with the same downloaded file) in another pc (with
the same version of winxp) and with works fine! So I concluded that the
problem is coming the configuration of the analyses pc. Now my problem is to
find out which one. Meanwhile if you have any suggestion on what I should
check, it will be very welcome.

Thank you very much for all of your support and attention.

Best regards,
Bruno

      ----- Original Message -----
From: Jens Havskov
To: Bruno Faria
Cc: [email protected]
Sent: Thursday, February 07, 2013 6:42 PM
Subject: Re: [seisan] GURSEI and MULPLT

bruno

i cannot reproduce your errors usign 9.1 on 32 bit windowsi XP. you
data
actully seem to have the correct station name inside gcf files, so
they
come out correct without the def file. when you say only converting
z-component, you mean that the name is not correct for the other 2 but
conversion is done ?  also wa works ok. have you tried to plot dirctly
with mulplt ? are there other things that does not work ?
when you cannot reproduce an error, hard to find. sur eyou have
version
9.1. try eev -version to make sure.

jens


On Wed, 6 Feb 2013, Bruno Faria wrote:

> Dear All,
>
> Recently I have updated SEISAN from version 8.2.1 to 9.1 (WINXP 32
bit) and
> I'm facing since then two issues:
>
> 1- GURSEI: is converting only the Z component (I'm using the same
gursei.def
> file as before). Is there any change to gursei.def?
>
> 2- In mulplt, after selecting Wa (Wood-Anderson correction) mulplt
crashes
> zooming the waveform. I'm using also the same response files as I
used for
> version 8.1 (actually since version 7.0).
>
> I'm wondering if I should change anything in mulplt.def and/or in
> seisan.def to have issues fixed.
>
> May I ask, please, somebody who had the same problem to help me to
fix this?
>
> Thank you very much in advance for your attention and assistance.
>
> Best regards,
> Bruno
>
>


_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

Reply via email to