Hello Paul and Jens,
As Jens said before FDF seismic station is the only problem!!! I grabbed
more data using waveman2disk without FDF and all work perfectly.
So, I have noticed one small detail.. FDF is the only station I have
into my waveserver with one letter into the network code (G), the rest
of them have two character (VE, CM, IU, CU, PR, etc). Could it be our
problem?
If you need more testing do not hesitate to write me!
Regards,
Miguel.
El 22/02/13 08:37, Paul Friberg escribió:
Miguel and Jens,
Please tell me some more details about the case that fails and the
case that succeeds. Is it just
the number of channels being written? 9 vs 131 that causes this
problem? This is a tough one to debug not knowing
more details. What if anything is special about station FDF channel
BHZ? Can you store just this one to disk using
waveman2disk and see if it works?
Miguel, could you do some tests increasing the number of channels in a
waveman2disk and see if any one channel causes the program to produce
a faulty SEISAn file?
Regards,
Paul
Jens Havskov wrote:
miguel
this file, as the previous i inspected after the upgrade, is corrupt.
if you run seiasc, you see at which channel it stops and in a hex
editor you see the problem. in this case, for channel FDF BHZ
(following 3 channels with zeros and sample rate 1.0), the channel
info about start time, sample rate and number of samples is missing.
seem to remember, it was the same problem in previous corrups file.
so there seems to be a new bug in the earthworm program.
jens
On Wed, 20 Feb 2013, Miguel Palma wrote:
Hello Jens,
Due to how big the file is to be sent by email, I already uploaded
to my Dropbox. So, please feel free to get the data form this link:
http://dl.dropbox.com/u/9051471/2013-02-20-1314-00S.MAN___131
But I have to mention about a particular situation where
waveman2disk works flawlessly with MULPLT. This happened when I got
a small set of data (9 channels instead of 131 of the previous
example) and it works!!!. So, considering we have a data combination
between IRIS, Colombia and Venezuela, maybe there are some seismic
stations after using waveman2disk which MULPLT is not happy with!
This small set of data can be retrieve from this link:
http://dl.dropbox.com/u/9051471/2013-02-20-0052-00S.MAN___009
Please let me know if you need more examples o any other test you
might be interested in.
Regards,
Miguel.
El 20/02/13 12:02, Jens Havskov escribió:
miguel
please send the bad file and i can check. i earlier recived a
corrupted seisan file from the new module so i tmigh be the same
problem.
jens
On Wed, 20 Feb 2013, Miguel Palma wrote:
Hello Paul and Jens,
Sorry because I could not test waveman2disk before, but today I
had a chance
and I found some fortran runtime error while opening a seisan
format file
obtained by using the new waveman2disk executable.
I got the new waveman2disk.exe from the link provided by Paul; I ran
waveman2disk to get seisan format data to be analyzed by SEISAN
V9.1 (on
Linux Ubuntu 64bits, but I also tried on Windows platform with
SEISAN V8.3
also 64bits); while using MULPLT to plot the data, I got the
following error
messages:
At line 620 of file wave.for
Fortran runtime error: Bad value during integer read
On windows a pop-out Visual Fortran run-time error appeared:
forrtl: severe (64): input conversion error, unit -5, file Internal
Formatted Read.
So, MULPLT could not read the new file as usual.
Any hints? 64 bits could be the problem?
Thank you in advance and best regards,
Miguel Palma.
El 11/01/13 14:59, Paul Friberg escribió:
Hi Earthworm/SEISAN users,
ISTI believes we have fixed a long standing problem with the
SEISAN waveform putaway
routines that was recently pointed out to us by Jens
Havskov. We
have gotten confirmation
on our tests from Jens that our fix looked okay, but we are
looking for more
folks who use SEISAN and EW on a day to day basis to test this.
The problem
was that the channel name in the wave files was incorrectly
formatted and that
location code and network code were not used at all in the
"event file channel" header.
The fixed SEISAN putaway routines have been placed into EW
Subversion, and we
pre-built binaries for trig2disk and waveman2disk for Windows
that you can
grab from here:
http://www.earthwormcentral.org/distribution/v7.6_fixes/
Please let us know if this works for you, or not. Thanks.
Note that this EW contribution/fix was entirely funded by ISTI.
Cheers,
Paul Friberg
ISTI == http://www.isti.com
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan
--
Este mensaje ha sido analizado por MailScanner
en busca de virus y otros contenidos peligrosos,
y se considera que está limpio.
FUNVISIS - Fundacion Venezolana de Investigaciones Sismologicas
--
Este mensaje ha sido analizado por MailScanner
en busca de virus y otros contenidos peligrosos,
y se considera que está limpio.
Fundación Venezolana de Investigaciones Sismológicas (FUNVISIS)
--
Este mensaje ha sido analizado por MailScanner
en busca de virus y otros contenidos peligrosos,
y se considera que está limpio.
Fundación Venezolana de Investigaciones Sismológicas (FUNVISIS)
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan