Hi Eduardo, Hi AllThank you very much for the SAC example. I can see the trace 
in Seisan but there is still a problem with any ground motion, I get comment 
"No response file".Even when I try to make velocity trace (from velocity 
trace), system try to find response information.Has anyone any idea?GrazynaOd: 
"Eduardo Moscoso" <[email protected]>Do: "Grazyna Holeczek" 
<[email protected]>; Wysłane: 2:49 Czwartek 2013-05-02Temat: Re: 
[seisan] ascii data in physical units to SeisanHola Grazyna:
      Unfortunately I have no experience with windows at all. When I did
      the conversion from xy to sac was for relocation purposes, so I
      didn't need the response file of the instrument. As your data is
      already deconvolved you should set the instrument's transfer
      function to 1, but I've never done it.
      I'm sending you an example trace in binary sac and 2 columns ascii
      (input format to xy2sac). 
      Good luck,
      Edo.
      On 01/05/13 18:41, Grazyna Holeczek wrote:
    
      Hi Eduardo
       
      I have tried to work with SAC
          velocity file in Seisan already but when I try to make groung
          motion or Wood Anderson I get comment "no response info" and
          nothing is changed.
      What is your experience, can you
          make Wood Anderson (displacement seismogram) with SAC velocity
          file without response file?
      If everything works fine by you,
          could you please send me SAC velocity file example (best the
          SAC ascii file)? I use Seisan for Windows.
       
      Thanks for your help, greetings
      Grazyna
       
      
        ----- Original Message ----- 
        From: Eduardo Moscoso 
        To: Grazyna Holeczek 
        Cc: [email protected] 
        Sent: Wednesday, May 01,
          2013 8:38 PM
        Subject: Re: [seisan] ascii
          data in physical units to Seisan
        
        Hi Grazyna:
          I had the same problem some time ago, the way I manage to read
          the data with seisan was converting the data to SAC. The
          utility can be found on this website and is called 
"xy2sac":http://web.utah.edu/thorne/software.html
          You can set m/s as the data unit.
          If you have a huge database, may be it's better to use seisan
          for parsing your database from SAC to mseed or seisan format.
          In my case, as I had the data already triggered, I worked
          directly with my data in SAC.
          Greetings from Chile,
          Eduardo.
          On 01/05/13 13:54, Grazyna Holeczek wrote:
        
          Hi Seisan community
           
          I have got ascii data in
              physical units, some channels of velocity in m/s and some
              other acceleration in m/s2.
          I know the comment ASCSEI
              converts ascii data to seisan but I see Seisan usually
              works with data in counts and response files. Is it the
              only way?
          Is it possible to input
              direct data in physical units without system response and
              process it in Seisan?
           
           
          Thanks
          Grazyna
          Central Mining Institute
          Poland, Katowice
           
           
           
          _______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

        
        
    
    
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

Reply via email to