Dear Jens

Everything works as documented.
Case 2 is a better solution for me.
A would add one suggestion. Please add the 'browse folder icon' for choosing 
alternative work directory, for user convenience. In the next version, if 
possible of course.
For now I can work freely with local databases.

Thanks and goodbye to the next issue
Grazyna Holeczek



Od: "Jens Havskov" <[email protected]>
Do: [email protected]; 
Wysłane: 11:47 Czwartek 2013-06-27
Temat: Re: SE v10.0 can not find the waveform files on local dir

> grazyna
> 
> i think you asked before and i did not answer. i have made a better 
> documentations as follows.
> 
> 
> Local data base in SE, access to EEV and reading waveform files.
> 
> Case 1: Default working directory
> 
> The default working directory in SE (example Windows) is \ seismo\WOR\. A 
> local data base can then be opened in any other directory. The waveform 
> files must then be in WAV or WOR. If they are in the local data base 
> directory, they can be found if  parameter WAVEFORM_DIRS is set in 
> SEISAN.DEF like
> 
> WAVEFORM_DIRS      Waveform directory   \seismo\wor\test
> 
> where the location of the waveform files are given as \seismo\wor\test, 
> which also can be the local data base directory.
> 
> EEV will not work since EEV will look in SE working directory.
> 
> Case 2: Directory with local data base is set as SE working directory
> 
> In SE the working directory can be set under file__configure. When set to 
> the directory of the local data base, EEV will work and waveform files 
> will be found if in WAV or local data base directory. WAVEFORM_DIRS   does 
> not need to be set.  However, no other local data base can be opened (a 
> bug to be fixed).
> 
> 
> please test and let me know
> 
> jens
> 
> On Thu, 27 Jun 2013, [email protected] wrote:
> 
> > I'm still trying to solve this problem without any result.
> > I checked a few local databases. Is always the same, the old interface 
> > Seisan (even from the new 10.0 version) shows traces, EEV from command line 
> > too but the Seisan Explorer can't find the waveform.
> > Could you check and let me know should it work or is a bug?
> >
> > Thanks in advance
> > Grazyna Holeczek
> >
> >
> >
> >
> > Od: [email protected]
> > Do: [email protected];
> > Wys?ane: 14:06 Wtorek 2013-06-25
> > Temat: SE v10.0 can not find the waveform files on local dir
> >
> >> Hi, i met a problem with the new version SE.
> >>
> >> I open local database in SE from a local directory.
> >> Both s-files and waveform files are there.
> >> The program see the s-files but can't find the waveform files.
> >> 'P' give an answer:
> >> No such file: 2011-10-05-11-46-01S.JES___003
> >> No waveform files found, return to continue.
> >>
> >> I mention old interface Seisan read the same local database properly.
> >>
> >> Grazyna
> >>
> >>
> >>
> >>
> >
> >
> >
> >




_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

Reply via email to