Dear Grazyna,

it is the second option the correct one, i.e, you define the value at the top 
of each layer which is kept constant until the next layer top is found.

As for velest, currently I don't have present but I think it is the same logic; 
anyway, in velmenu the model in the STATION0.HYP is converted into the velest 
format (should done this before running the inversion, the same for the 
stations coordinates).

All the best,

Nuno

_________________________________________________
 
Nuno Afonso Dias
 
Adjoint Professor/Researcher
 
Instituto Dom Luiz IDL
Edif. C8, FCUL, Campo Grande
1749-016 LISBOA
Portugal
Email: [email protected]
Tel.: +351.217500000 (Ext. 28331)
Fax: +351.217500977


________________________________________
De: [email protected] [[email protected]] Em Nome De 
[email protected] [[email protected]]
Enviado: quarta-feira, 11 de Dezembro de 2013 10:50
Para: [email protected]
Assunto: Re: [seisan] layered model -depth to top or bottom?

Hello again

I ask in a simpler way using example:

If model in station0.hyp looks like
  6.2       0.0
  6.6      12.0
  7.1      23.0
  8.05     31.0
  8.25     50.0
  8.5      80.0
that means:
above 0 km - 6.2 km/s
0 - 12 km    - 6.6 km/s
12-23 km    - 7.1 km/s
23-31 km    - 8.05 km/s
31-50 km    - 8.25 km/s
50-80 km    -8.5 km/s
or
0 - 12 km    - 6.2 km/s
12-23 km    - 6.6 km/s
23-31 km    - 7.1 km/s
31-50 km    - 8.05 km/s
50-80 km    - 8.25 km/s
below 80 km - 8.5 km/s

???

Grazyna



Od: [email protected]
Do: [email protected]; [email protected];
Wysłane: 14:21 Wtorek 2013-12-10
Temat: [seisan] layer model -depth to top or bottom?

> Hello
>
> I'm not sure if the depth in layer model in station0.hyp is taken to top or 
> to bottom of the layer.
> According to hypocenter documentation page 18 (4.1.3 Layered Velocity Model 
> Parametres) it is "Depth to bottom of layer in km" and I treated it so till 
> now.
> But the Velest program take the depth to the top, "upper interface of the 
> velocity layer in km", according to Velest users guide page 2, 6.3 Content of 
> the velocity model file.
> How shoud I define the model in station0.hyp to both programs Hyp and Velest 
> take it correctly?
>
> Regards
> Grażyna Holeczek
>
>
> _______________________________________________
> seisan mailing list
> [email protected]
> http://mailman.uib.no/listinfo/seisan
>




_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

Reply via email to