Hello Leandro,

For single station location some of us use “E” for the azimuth reading, in 
order to split the information on the P phase in two lines. See example below.

Good luck,
Peter

2015  1 1 0036  5.1 D  64.092 -18.603 15.0  DNK  1 0.0 2.1LDNK                1
GAP=360        2.96      53.0   421.5  0.0  0.1291E+05  0.0000E+00  0.0000E+00E
2015-01-01-0035-00S.DNK___058                                                 6
STAT SP IPHASW D HRMM SECON CODA AMPLIT PERI AZIMU VELO AIN AR TRES W  DIS CAZ7
SCO  BZ E         037 35.21                  166.9 10.8      0         727 350
SCO  BZ IP        037 40.84                              46    0.0210  727 350
SCO  BN ES        038 56.22                              48   -0.0210  727 350
SCO  BZ  IAML     038 57.91         0.8 0.50                           727 350


Fra: [email protected] [mailto:[email protected]] På vegne af 
Leandro Pérez
Sendt: 11. november 2015 01:28
Til: [email protected]
Emne: [seisan] Determine azimuth!

Hi!

What does mean phase "I" or "E" ?, to locate in a single station.

When i can use one or another?.
Thanks!

--
Leandro Pérez
M.Sc. Candidato
Departamento de Ciencias de la Tierra
CICESE, Baja California.
Tel.(+52) 646 1791505
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

Reply via email to